

HomeTron(kicad)
- Size
- 58 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 40
- Pads
- 96
- Tracks, vias
- 251, 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Aug 2024
- Updated
- 22 Aug 2024
Overview
HomeTron(kicad) is an open-source printed circuit board by HENRYQUE-FARIAS, from the HENRYQUE-FARIAS/HomeTron repository on GitHub. It is a 2-layer board of 58 × 50 mm with 29 parts on 40 nets, routed with 251 tracks and 13 vias.
It is built around the ESP-12E, CP2102 and HLK-PM01, with the LM1117-3.3, B3U-1000P-B and BC547 among its other parts. Its parts include 7 resistors, 4 connectors, 4 switches, 3 capacitors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
7ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesCP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion ModulesHLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedB3U-1000P-B
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile SwitchesBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)SS-12D00-G3
插件-3P,8.8x3.9mm-35℃~+75℃ 3.9mm 7.2mm 8.8mm Black PC Pin Rectangular Columnar SPDT Through Hole 插件-3P,8.8x3.9mm Slide Switches ROHSSOFNGSlide Switches
README
README.mdHomeTron
hardware voltado para automação de sistema eletrico. controlador da da familia Espressif Systems
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R7 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C1, C2 |
| 2 | B3U-1000P-B | Button_Switch_SMD:SW_SPST_B3U-1000P-B | SW1, SW2 |
| 2 | LOGO | Logo:hardtron | G***, G*** |
| 1 | 1A | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1uF | Capacitor_SMD:CP_Elec_4x5.4 | C3 |
| 1 | 300V/10A | Connector_TE-Connectivity:Tblock3.10x10mm | J2 |
| 1 | 300k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 4N25 | Package_DIP:DIP-6_W7.62mm_SMDSocket_SmallPads | U2 |
| 1 | BC547 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Cp2102 | Connector_Wuerth:Wuerth_WR-WTB_64800611622_1x06_P2.50mm_Vertical | J4 |
| 1 | DIODE | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | ESP-12E | RF_Module:ESP-12E | U1 |
| 1 | FINDER-34.51 | Relay_THT:Relay_SPDT_Finder_34.51_Vertical | K1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | InAC | Connector_TE-Connectivity:Tblock10x10mm | J1 |
| 1 | LED | LED_SMD:LED_PLCC_2835 | D2 |
| 1 | LM1117-3.3 | Package_DIP:R-PDSO-G4 | U3 |
| 1 | MBL110S | Diode_SMD:Diode_Bridge_Vishay_MBLS | D3 |
| 1 | OutAC | Connector_TE-Connectivity:Tblock10x10mm | J3 |
| 1 | SS12D00 | Connector_TE-Connectivity:TE_826576-3_1x03_P1mm_Vertical | SW3 |
Similar boards
- 2 layers61.5 × 48.5 mm

- 2 layers78 × 47 mm

AgroTron(kicad)
HenryqueFarias16/AgroTron
Projeto de Automação agrícola com microcontrolador ESP12-E
35 parts - 2 layers97 × 77.5 mm

ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers100 × 94 mm

ESP8266 Roomba panel x 3
linlun/HW-ESP8266_Roomba
Kicad schematics of a generic ESP8266 board with interfaces for OLED-display, rotary encoder, Roomba and DC/DC
204 parts2 - 2 layers29.7 × 126.5 mm

- 2 layers90 × 70 mm

Starter x51 USB
ExploreEmbedded/8051_ExploreStarter8051
8051 Design files and sample code for Starter board
50 parts4 - 2 layers180 × 135 mm

- 2 layers49.5 × 49.5 mm

Ac relay
kikeelectronico/ac-relay
A relay controlled by an ESP8266 and powered by AC main
17 partsGPL-3.0
Questions
How big is the HomeTron(kicad) PCB?
It measures 58 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HomeTron(kicad) use?
29 parts, built around the ESP-12E, CP2102, HLK-PM01 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HomeTron(kicad) KiCad files?
From the HENRYQUE-FARIAS/HomeTron repository on GitHub, at the commit this page was made from: the board is HomeTron(kicad).kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HomeTron(kicad) design in my own project?
Its repository states no licence, so its author keeps all rights: ask HENRYQUE-FARIAS before reusing the design.