

Phone
- Size
- 101 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 38
- Pads
- 187
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 3
- Created
- 6 Oct 2018
- Updated
- 21 Aug 2018
Overview
Phone is an open-source printed circuit board by lfmmd, from the lfmmd/kicad repository on GitHub. It is a 2-layer board of 101 × 50.8 mm with 17 parts on 38 nets.
It is built around the AMS1117-3.3. Its parts include 7 capacitors, 4 ICs, 2 resistors, 2 connectors and 1 switch. It belongs with the STM32 boards of this library.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 104 | MyFT_C_0603 | C1, C2, C3, C4 |
| 2 | 10p | MyFT_C_0603 | C6, C7 |
| 1 | 1.5K | MyFT_R_0603 | R2 |
| 1 | 10K | MyFT_R_0603 | R1 |
| 1 | 10uF | MyFT_C_0603 | C5 |
| 1 | 8MHz | MyFT_Crystal_SMD_5032_2Pads | Y1 |
| 1 | AMS1117-3.3 | MyFT_SOT-223 | U2 |
| 1 | CONN_4 | SIL-4 | P1 |
| 1 | GAMEPAD | MyFT_GamePad_For_X2 | U3 |
| 1 | N900_KEYBOARD | MyFT_N900_Keyboard | U4 |
| 1 | RST | MyFT_4.5x4.5_SMD | SW7 |
| 1 | STM32F103_48PIN | MyFT_LQFP-48-1EP_7x7mm_Pitch0.5mm | U1 |
| 1 | USB_B | MyFT_USB_Mini_B_PIN_ONLY | J1 |
More from lfmmd/kicad
8- 2 layers133.7 × 73 mm

- 2 layers64.8 × 70.1 mm

- 2 layers120.4 × 25.4 mm

- 2 layers63.6 × 48.5 mm

- 2 layers

- 2 layers16.5 × 15.2 mm

- 2 layers41.7 × 25.7 mm

- 2 layers23.2 × 31.8 mm

Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Phone PCB?
It measures 101 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Phone use?
17 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phone KiCad files?
From the lfmmd/kicad repository on GitHub, at the commit this page was made from: the board is phone/x2/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phone design in my own project?
Its repository states no licence, so its author keeps all rights: ask lfmmd before reusing the design.