2 layers64.8 × 70.1 mm
2 layers133.7 × 73 mm
Handmade01
lfmmd/kicad- Size
- 133.7 × 73 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 157
- Pads
- 523
- Tracks, vias
- 1,898, 214
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 6 Oct 2018
- Updated
- 21 Aug 2018
Overview
Handmade01 is an open-source printed circuit board by lfmmd, from the lfmmd/kicad repository on GitHub. It is a 2-layer board of 133.7 × 73 mm with 78 parts on 157 nets, routed with 1,898 tracks and 214 vias.
It is built around the PAM8403, PCM5102APW and TPS71718DCK. Its parts include 30 resistors, 14 switches, 12 capacitors, 9 ICs and 6 connectors.
Main components
3
PAM8403
SOP-16-40℃~+85℃ 2-Channel 2.2V~5.5V 3Wx2@4Ω 6.3mA 90% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D SOP-16 Audio Amplifiers ROHSSlkorAudio Amplifiers
PCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose
TPS71718DCK
SC-70-5-40℃~+125℃@(Tj) 1 1.8V 150mA 300mV@(150mA) 30uVrms 45uA 6.5V 70dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 4.7K | MyFT_R_0603 | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +11 |
| 5 | 0.1uF | MyFT_C_0603 | C4, C5, C6, C9, C10 |
| 2 | 10K | MyFT_R_0603 | R1, R2 |
| 2 | 1uF | MyFT_C_0603 | C11, C12 |
| 2 | 2.2nF | MyFT_C_0603 | C7, C8 |
| 2 | 2.2uF | MyFT_C_0603 | C2, C3 |
| 2 | CONN-32PIN | MyFT_FPC_32_0.5mm | U8, U9 |
| 2 | CONN-38PIN | MyFT_FPC_38_0.5mm | U6, U7 |
| 2 | MicroSD | MyFT_MicroSD | CON1, CON2 |
| 1 | 100K | MyFT_R_0603 | R4 |
| 1 | 10uF | MyFT_C_0603 | C1 |
| 1 | 1AM | MyFT_SOT-23_Handsoldering | Q1 |
| 1 | A | MyFT_GamePad_Circle | SW11 |
| 1 | B | MyFT_GamePad_Circle | SW12 |
| 1 | BAT | GS3 | BAT1 |
| 1 | CM3354 | MyFT_CM3354_SMD | U4 |
| 1 | Down | MyFT_GamePad_Circle_Cut | SW4 |
| 1 | IPS_2.4_240x320_ST7789V | MyFT_FPC_45_0.5mm_Rev | U3 |
| 1 | JACK_TRS_6PINS | MyFT_PJ311_3.5mm | J1 |
| 1 | L | MyFT_4.5x4.5_TS-026-3 | SW9 |
| 1 | Left | MyFT_GamePad_Circle_Cut | SW5 |
| 1 | PAM8403 | MyFT_SOP-16_4.4x10.4mm_Pitch1.27mm | U2 |
| 1 | PCM5102A | MyFT_TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 1 | Power | MyFT_4.5x4.5_TS-026-3 | SW1 |
| 1 | R | MyFT_4.5x4.5_TS-026-3 | SW10 |
| 1 | Reset | MyFT_4.5x4.5_TS-026-3 | SW2 |
| 1 | Right | MyFT_GamePad_Circle_Cut | SW6 |
| 1 | SPEAKER_L | GS2 | LS2 |
| 1 | SPEAKER_R | GS2 | LS1 |
| 1 | Select | MyFT_SW_SPST_TL3342 | SW7 |
| 1 | Start | MyFT_SW_SPST_TL3342 | SW8 |
| 1 | TPS71718 | MyFT_SC-70-5 | U5 |
| 1 | UART_DEBUG | SIL-3 | P6 |
| 1 | UP | MyFT_GamePad_Circle_Cut | SW3 |
| 1 | USB_OTG | MyFT_USB_Micro-B | P4 |
| 1 | VOLUMN | MyFT_Volumn | P1 |
| 1 | X | MyFT_GamePad_Circle | SW13 |
| 1 | Y | MyFT_GamePad_Circle | SW14 |
The 75 most common of 78 parts.
More from lfmmd/kicad
8- 2 layers120.4 × 25.4 mm
- 2 layers63.6 × 48.5 mm
- 2 layers101 × 50.8 mm
- 2 layers
- 2 layers16.5 × 15.2 mm
- 2 layers41.7 × 25.7 mm
- 2 layers23.2 × 31.8 mm
Similar boards
- 2 layers103 × 55.5 mm
Boite hp
Jzn-wbr/Starter
Un système de réveil connecté qui combine une station audio, un bracelet de mouvement et une application mobile pour transformer le réveil en un vrai départ de journée.
27 parts - 2 layers57 × 97 mm
MainCollar
plyalex/OpenFence
OpenFence is an open source GPS based digital livestock fencing system and web interface, aiming to reduce barriers of using cell grazing.
78 parts28GPL-3.0 - 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 2 layers95.5 × 104.6 mm
FmRadio
TeknoTrek/Arduino-Nano-FM-Radio-Si4703
Part of the Teknotrek YouTube channel, this repository includes KiCad files for an FM Radio project using Arduino Nano, Si4703, and other components.
16 parts7 - 2 layers68.3 × 31.5 mm
- 2 layers137.5 × 51 mm
- 2 layers85 × 52 mm
Intercom
aluisioalves123/rf-intercom
Interfone de apertar para falar, sem fio: as duas unidades conversam por rádio (nRF24L01+ com antena) e só precisam de uma tomada.
32 parts2 - 2 layers96.5 × 105.4 mm
Mini Record Player Clock
anadskman/Mini-Record-Player-Clock
A compact desktop Bluetooth speaker and clock inspired by a vintage record player. The aim of this project is to combine a functional Bluetooth speaker and Wi-Fi clock into a clean, fully 3D printed desktop display.
38 parts1
Questions
How big is the Handmade01 PCB?
It measures 133.7 × 73 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Handmade01 use?
78 parts, built around the PAM8403, PCM5102APW and TPS71718DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Handmade01 KiCad files?
From the lfmmd/kicad repository on GitHub, at the commit this page was made from: the board is handheld/handmade01/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Handmade01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask lfmmd before reusing the design.