

RP2040 minimal - Copy
- Size
- 99.8 × 99.2 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 771
- Nets
- 236
- Pads
- 1,433
- Tracks, vias
- 2,178, 366
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Mar 2024
- Updated
- 2 Mar 2024
Overview
RP2040 minimal - Copy is an open-source printed circuit board by leonidas213, from the leonidas213/picoDrone repository on GitHub. It is a 2-layer board of 99.8 × 99.2 mm with 771 parts on 236 nets, routed with 2,178 tracks and 366 vias.
It is built around the RP2040, W25Q128JVSIQ and MCP3008-I/P, with the SI2302DDS and ABLS-12.000MHZ-B4-T among its other parts. Its parts include 68 capacitors, 64 resistors, 16 ICs, 12 connectors and 12 switches. It belongs with the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHMCP3008-I/P
PDIP-16-40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 61dB 8 Multiplexers SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)SI2302DDS
SOT-23-55℃~+150℃ 1 N-channel 2.9A 20V 3.5nC@4.5V 75mΩ@2.5V 850mV 860mW N-Channel SOT-23 MOSFETs ROHSVishay IntertechnologyMOSFETsABLS-12.000MHZ-B4-T
HC-49S-SMD-20℃~+70℃ 12MHz 18pF 50Ω ±30ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystals
README
README.mdpicoDrone
Parts
771| Qty | Value | Footprint | References |
|---|---|---|---|
| 539 | , , , , , , , , , , , , , , , +523 | ||
| 40 | 100n | Capacitor_SMD:C_0402_1005Metric | C11, C11, C12, C12, C13, C13, C14, C14, C15, C15, C16, C16, C21, C21, C23, C23 +24 |
| 20 | 1k | Capacitor_SMD:C_0402_1005Metric | R1, R1, R14, R14, R15, R15, R16, R16, R17, R17, R18, R18, R19, R19, R20, R20 +4 |
| 16 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H1, H1, H1, H2, H2, H2, H2, H3, H3, H3, H3, H4, H4, H4, H4 |
| 12 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C1, C4, C4, C17, C17, C20, C20, C22, C22, C34, C34 |
| 10 | NPTH | NPTH | KiKit_MB_2_1, KiKit_MB_2_1, KiKit_MB_2_2, KiKit_MB_2_2, KiKit_MB_2_3, KiKit_MB_2_3, KiKit_MB_2_4, KiKit_MB_2_4, KiKit_MB_2_5, KiKit_MB_2_5 |
| 8 | 100K | Capacitor_SMD:C_0402_1005Metric | R11, R11, R13, R13, R31, R31, R32, R32 |
| 8 | 10K | Capacitor_SMD:C_0402_1005Metric | R8, R8, R10, R10, R28, R28, R30, R30 |
| 8 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D1, D2, D2, D3, D3, D4, D4 |
| 8 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C8, C10, C10, C25, C25, C27, C27 |
| 8 | 27 | Capacitor_SMD:C_0402_1005Metric | R3, R3, R4, R4, R25, R25, R26, R26 |
| 8 | 27p | Capacitor_SMD:C_0402_1005Metric | C2, C2, C3, C3, C18, C18, C19, C19 |
| 8 | 4,7K | Capacitor_SMD:C_0402_1005Metric | R9, R9, R12, R12, R27, R27, R29, R29 |
| 8 | 5.1k | Capacitor_SMD:C_0402_1005Metric | R6, R6, R7, R7, R21, R21, R22, R22 |
| 8 | Conn_01x02_Socket | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Horizontal | J1, J1, J3, J3, J4, J4, J6, J6 |
| 8 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_B_4, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3, KiKit_FID_T_4 |
| 8 | SW_Omron_B3FS | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW1, SW3, SW3, SW4, SW4, SW5, SW5 |
| 8 | Si2302DDS | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q2, Q2, Q3, Q3, Q4, Q4 |
| 4 | ABLS-12.000MHZ-B4-T | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1, Y1, Y2, Y2 |
| 4 | DNF | Capacitor_SMD:C_0402_1005Metric | R2, R2, R23, R23 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 4 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U1, U6, U6 |
| 4 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3, U3, U7, U7 |
| 4 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W8.61mm_P2.54mm_LowProfile | SW2, SW2, SW6, SW6 |
| 4 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2, J2, J5, J5 |
| 4 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2, U2, U5, U5 |
| 2 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1, BZ1 |
| 2 | MCP3008 | Package_DIP:DIP-16_W7.62mm_Socket | U8, U8 |
| 2 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U4, U4 |
More from leonidas213/picoDrone
1- 2 layers83.8 × 48.6 mm

Similar boards
- 4 layers82.6 × 82.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 2 layers99.1 × 72.9 mm

- 2 layers475 × 139.9 mm

Skogaslider main pcb
skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
175 parts18MIT - 2 layers30.1 × 65.1 mm

RPi 0 RP2040
Hugoyhu/Pico2040ZeroW
Raspberry Pi Form Factor, RP2040, Wireless support with ESP-01
46 parts7Apache-2.0 - 2 layers210.1 × 98.3 mm

Granola trailmix
michaelswitzer/granola-trailmix
The TrailMix is a low-cost professional grade button box style arcade controller.
48 parts6MIT - 2 layers64 × 48.4 mm

Rp2040-ble
kartik2406/rp2040-ble
A PCB that uses RP2040 MCU and HM-BT4502 BLE passthrough module. This enables the RP2040 to communicated with other devices using Bluetooth. The bluetooth module is connected via UART(0)
42 parts5 - 4 layers188 × 71.8 mm

Combo board
bikeNomad/fluke_884x_continuity_buzzer
Add-in continuity buzzer for the Fluke 8840A and 8842A multimeters using an RP2040 microcontroller
84 parts4MIT
Questions
How big is the RP2040 minimal - Copy PCB?
It measures 99.8 × 99.2 mm and has 2 copper layers, 1 mm thick.
What parts does the RP2040 minimal - Copy use?
771 parts, built around the RP2040, W25Q128JVSIQ, MCP3008-I/P and SI2302DDS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP2040 minimal - Copy KiCad files?
From the leonidas213/picoDrone repository on GitHub, at the commit this page was made from: the board is pcb/RP2040_minimal - Copy.kicad_pcb and its schematic pcb/RP2040_minimal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP2040 minimal - Copy design in my own project?
Its repository states no licence, so its author keeps all rights: ask leonidas213 before reusing the design.