

Rhythm game controller development
- Size
- 65.3 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 106
- Pads
- 327
- Tracks, vias
- 739, 134
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Oct 2024
- Updated
- 11 Jun 2026
Overview
Sch is an open-source printed circuit board by leobeo-png, from the leobeo-png/Luminas repository on GitHub. It is a 2-layer board of 65.3 × 110 mm with 76 parts on 106 nets, routed with 739 tracks and 134 vias.
It is built around the SN74LV1T34DBV, MPR121QR2 and PCA9548ADB, with the AMS1117-3.3, USBLC6-2SC6 and WS2812B among its other parts. Its parts include 24 resistors, 19 capacitors, 7 connectors, 6 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Main components
6SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversMPR121QR2
QFN-20(3x3)-40℃~+85℃ 1.71V~3.6V 12 29uA 2kV 3uA Capacitive Touch QFN-20(3x3) Touch Sensors ROHSNXP SemiconductorsTouch SensorsPCA9548ADB
SSOP-24-208mil2.3V~5.5V I2C、SMBus SSOP-24 Interface - Specialized ROHSTexas InstrumentsInterface - SpecializedAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdLuminas
Rhythm game controller development.
Video Demo
Video Demo
Description
- Custom keyboard NKRO HID
- PCB size for 15.6" laptop
- Separate I2C Bus for the capacitive touch and time of flight to reduce load
Components Used:
- STM32F411CEU6
- MPR121 Modules x3
- VL53L0X ToF sensors x2 (x4 in the future)
- TCA9548 I2C Multiplexer
- Pull-up resistors
Goals
- Improve the design of the PCB
- Reaserch and design the casing
What I Learnt so Far
- HID (descriptors, how NKRO works)
- PCB schematic designing
- Diving further into I2C
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R11, R12, R15, R17, R18, R19, R20, R21 |
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6, C10, C11, C16, C17, C18, C19 |
| 8 | Conn_01x01 | chu_main:ChuKey | KEY1, KEY2, KEY3, KEY4, KEY5, KEY6, KEY7, KEY8 |
| 7 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R13, R14, R16, R22, R23 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | MH1, MH2, MH3, MH4 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 33p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R8 |
| 2 | Conn_01x01 | chu_main:Solder_3P | J6, J7 |
| 2 | Conn_01x06 | chu_main:Conn_Solder_I2C | J3, J4 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 75K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | MPR121QR2 | Package_DFN_QFN:UQFN-20_3x3mm_P0.4mm | U1 |
| 1 | PCA9548ADB | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U3 |
| 1 | RED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | STM32F411R_C-E_Tx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_TS-1088-xR025 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers235 × 45 mm

- 2 layers88.4 × 46.1 mm

- 2 layers48 × 71.2 mm

- 4 layers92.7 × 92.7 mm

OSCD demo PCB
tmjnijssen/OSCD_demo_PCB
Open Science Community Delft demonstration PCB
94 parts3CERN-OHL-P-2.0 - 4 layers132 × 84.5 mm

Hamodule
crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.
207 parts28 - 4 layers100 × 100 mm

NotSmart Speaker
BBroadbent/NotSmart-Speaker
A open-hardware, local-first "dumb" smart speaker powered by an ESP32, PCM5100A DAC, TPA3118 Class-D amp, and 20V USB-PD.
102 parts - 4 layers91 × 91 mm

- 2 layers38.1 × 133.4 mm

PCBProject
vinnesttree/TixClock
The Tix Clock was originally sold in 2006 by ThinkGeek. Unfortunately, these are no longer sold. This project hopes to try to recreate this iconic clock in a miniature format.
85 partsMIT
Questions
How big is the Sch PCB?
It measures 65.3 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sch use?
76 parts, built around the SN74LV1T34DBV, MPR121QR2, PCA9548ADB and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sch KiCad files?
From the leobeo-png/Luminas repository on GitHub, at the commit this page was made from: the board is sch/sch.kicad_pcb and its schematic sch/sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sch design in my own project?
Its repository states no licence, so its author keeps all rights: ask leobeo-png before reusing the design.