4 layers100 × 100 mm
NotSmart Speaker
BBroadbent/NotSmart-Speaker
A open-hardware, local-first "dumb" smart speaker powered by an ESP32, PCM5100A DAC, TPA3118 Class-D amp, and 20V USB-PD.
102 parts
2 layers48 × 71.2 mm
Custom esp32
meznokto/pcbsCircuit board designs
- Size
- 48 × 71.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 63
- Pads
- 224
- Tracks, vias
- 226, 23
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Dec 2025
- Updated
- 19 Dec 2025
Overview
Custom esp32 is an open-source printed circuit board by meznokto, from the meznokto/pcbs repository on GitHub. It is a 2-layer board of 48 × 71.2 mm with 37 parts on 63 nets, routed with 226 tracks and 23 vias.
It is built around the ESP32-S3-WROOM-1-N8, SN74LV1T34DBV and DS18B20U, with the AMS1117-3.3, USBLC6-2SC6 and WS2812B among its other parts. Its parts include 8 capacitors, 7 ICs, 6 connectors, 5 resistors and 3 diodes. It belongs with the ESP32 boards of this library.
Main components
6
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
DS18B20U
MSOP-8-55℃~+125℃ 12bit 2.5V~5.5V 400ms 750nA Single-bus ±0.4℃ MSOP-8 Temperature Sensors ROHSUMWTemperature Sensors
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0u1F | Capacitor_SMD:C_0603_1608Metric | C2, C5, C9, C10 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_4.0x4.0mm | TP1, TP2, TP3 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5, J6 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 4.7k | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS645 | SW3 |
| 1 | Barrel_Jack | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | J2 |
| 1 | DS18B20U | Package_SO:MSOP-8_3x3mm_P0.65mm | U5 |
| 1 | ESP32-S3-WROOM-1-N8 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | PWRLED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Power_Select | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | SN74LVC2T45DCUR_A->B | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U7 |
| 1 | SN74LVC2T45DCUR_B->A | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U6 |
| 1 | Switches | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |
Similar boards
- 2 layers65.3 × 110 mm
- 2 layers61 × 35 mm
Esp32-1pcb
shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-
Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED
44 parts1 - 4 layers136 × 95 mm
- 2 layers46.6 × 32.7 mm
- 2 layers94 × 70 mm
- 4 layers67 × 42 mm
Sonar Controller
haydenmc/McAfee-Farm-Sonar-Controller
An ESP32 project that uses a sonar depth sensor to measure the water level of a cistern tank.
59 parts - 2 layers155.1 × 122 mm
KiCad Main
mgiesen/Magic-Tabmount
Der "Magic Tabmount" ist eine smarte Wandhalterung für das iPad (Generation 5 bis 9). Durch ein integriertes Magnetsystem kann das iPad mit einem Handgriff an der Wand befestigt oder wieder entfernt werden.
55 parts1
Questions
How big is the Custom esp32 PCB?
It measures 48 × 71.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Custom esp32 use?
37 parts, built around the ESP32-S3-WROOM-1-N8, SN74LV1T34DBV, DS18B20U and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Custom esp32 KiCad files?
From the meznokto/pcbs repository on GitHub, at the commit this page was made from: the board is custom_esp32/custom_esp32.kicad_pcb and its schematic custom_esp32/custom_esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Custom esp32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask meznokto before reusing the design.