2 layers88.4 × 46.1 mm Pistol Camera Driver, the printed circuit board in 3D

Pistol Camera Driver

Size: 88.4 × 46.1 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 82
Nets: 85
Pads: 311
Tracks, vias: 919, 392
Pours: 2
Routed: Yes
KiCad: KiCad 7 (file 20221018)
Created: 4 Feb 2024
Updated: 17 Apr 2024

Overview

Pistol Camera Driver is an open-source printed circuit board by AndreyUdeneew, from the AndreyUdeneew/Fara_4_warriors repository on GitHub. It is a 2-layer board of 88.4 × 46.1 mm with 82 parts on 85 nets, routed with 919 tracks and 392 vias.

It is built around the DRV8834PWP, LDD-700L and PCA9548ADB, with the RS0101YH6, CDBA3100-HF and AO3400A among its other parts. Its parts include 32 resistors, 17 connectors, 14 capacitors, 8 ICs and 2 diodes.

Main components

README

README.md

Fara_4_warriors

Project files

Show this board on your page

https://pcbkit.io/boards/AndreyUdeneew/Fara_4_warriors

The board's own page, for a message or a post.

Source

Repository: AndreyUdeneew/Fara_4_warriors
Board file: Pistol_Camera_Driver.kicad_pcb
Commit: 37876df
Licence: Not stated

Parts

Qty	Value	Footprint	References
13	4.7k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R1, R4, R5, R6, R7, R25, R26, R27, R28, R29, R30, R31, R32
6	Screw_Terminal_01x02	Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical	J1, J2, J4, J8, J10, J11
5	I2C	Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical	J9, J12, J15, J16, J17
4	0.1	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C2, C6, C10, C13
4	3.9	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R11, R13, R17, R18
4	470	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R9, R10, R15, R16
3	0.01	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C7, C11, C14
2	0	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R21, R22
2	1	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C3, C5
2	10k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R14, R20
2	10uF	Capacitor_THT:CP_Radial_D6.3mm_P2.50mm	C4, C9
2	1k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R23, R24
2	2.2	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C8, C12
2	CDBA3100-HF	Diode_SMD:D_SMA	D3, D4
2	Conn_01x03_Socket	Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical	J6, J7
2	DRV8834PWP	Shield_Emergent:DRV8834PWP	U4, U5
1	0.33	Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C1
1	10 k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R19
1	240	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R8
1	390	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R12
1	47k	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R3
1	4k7	Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R2
1	AO3400A	Package_TO_SOT_SMD:SOT-23	Q2
1	Bluetooth	Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical	J14
1	FFB2222A	Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering	Q1
1	IM03	Relay_THT:Relay_DPDT_AXICOM_IMSeries_Pitch5.08mm	K1
1	Joystick	Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical	J5
1	LDD-700L	Shield_Emergent:LDD-700L	U7
1	LM317_TO-263	Package_TO_SOT_SMD:TO-263-2	U2
1	LM7805_TO220	Package_TO_SOT_THT:TO-220-3_Vertical	U1
1	Objective	Connector_PinSocket_1.27mm:PinSocket_1x08_P1.27mm_Vertical	J3
1	PCA9548ADB	Package_SO:SSOP-24_5.3x8.2mm_P0.65mm	U8
1	RS0101YH6	Package_TO_SOT_SMD:SOT-23-6_Handsoldering	U6
1	Raspberri_Pi_Pico	Shield_Emergent:Raspberry Pi Pico	U3
1	Screw_Terminal_01x02	Connector_PinSocket_1.27mm:PinSocket_1x02_P1.27mm_Vertical	J13

The 76 most common of 82 parts.

Similar boards

2 layers90.6 × 46.1 mm
Pistol Camera Driver
AndreyUdeneew/_VedroController

109 parts
2 layers
VeloDashboard
JanBurp/VeloDashboard
Bicycle computer for a velomobile
58 parts3
2 layers36.5 × 25.9 mm
Uart tt pc
ZhuYanzhen1/MM32_CLion
本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法，并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.
15 parts58AGPL-3.0
2 layers65.3 × 110 mm
Sch
leobeo-png/Luminas
Rhythm game controller development
76 parts
2 layers235 × 45 mm
EosEncoderBoard
ndebruin/lightBoardEncoders

75 parts
2 layers191.3 × 181.7 mm
IO Card G3
PerMalmberg/IO-Card-G3
This is my custom I/O card, third generation. Main purpose is to serve as an alarm system.
400 parts7MIT
4 layers96 × 42.2 mm
CANDrive
Andreasdahlberg/CANDrive
CANDrive is a brushed DC Motor Controller controlled via a CAN interface.
80 parts3GPL-3.0
4 layers96 × 42.2 mm
Candrive
Andreasdahlberg/CANDriveHW
CANDrive is a brushed DC Motor Controller controlled via a CAN interface.
70 partsCC0-1.0

Questions

How big is the Pistol Camera Driver PCB?

It measures 88.4 × 46.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pistol Camera Driver use?

82 parts, built around the DRV8834PWP, LDD-700L, PCA9548ADB and RS0101YH6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pistol Camera Driver KiCad files?

From the AndreyUdeneew/Fara_4_warriors repository on GitHub, at the commit this page was made from: the board is Pistol_Camera_Driver.kicad_pcb and its schematic Pistol_Camera_Driver(crushed).kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pistol Camera Driver design in my own project?

Its repository states no licence, so its author keeps all rights: ask AndreyUdeneew before reusing the design.

Overview

Main components

DRV8834PWP

LDD-700L

PCA9548ADB

RS0101YH6

CDBA3100-HF

AO3400A

FFB2222A