

Controller
Die beste Lampe
- Size
- 56.5 × 124 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 56
- Pads
- 211
- Tracks, vias
- 846, 354
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Dec 2023
- Updated
- 19 Oct 2025
Overview
Controller is an open-source printed circuit board by lenaschimmel, from the lenaschimmel/bestelampe repository on GitHub. It is a 4-layer board of 56.5 × 124 mm with 41 parts on 56 nets, routed with 846 tracks and 354 vias.
It is built around the TCA6408ARSVR, VEML6040A3OG and TXB0104RUTR, with the AO3401A, PRT-14417 and SFW20S-2STE1LF among its other parts. Its parts include 7 capacitors, 7 connectors, 5 resistors, 5 ICs and 2 transistors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
6TCA6408ARSVR
UQFN-16(1.8x2.6)-40℃~+85℃ 1.65V~5.5V 10mA 1uA 2 200mV 25mA 4.1V 400kHz 8 I2C、SMBus Interrupt Output Push-Pull Reset function、Cascading and address extension、Built-in LED driver、IO level configurable UQFN-16(1.8x2.6) I/O Expanders ROHSTexas InstrumentsI/O ExpandersVEML6040A3OG
OPLGA-4(1.3x2)-40℃~+85℃ 1.25mm 16.496klx 16bit 1mm 2.5V~3.6V 2mm Color Recognition I2C Red, Green, Blue, White OPLGA-4(1.3x2) Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsTXB0104RUTR
UQFN-12(1.7x2)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional Tri-State UQFN-12(1.7x2) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsPRT-14417
SMD,P=1mm-25℃~+85℃ 1 1A 1mm 1x4P 4 4P 50V Copper alloy PA Surface Mount, Right Angle Tin UL94V-0 SMD,P=1mm Wire To Board Connector ROHSSparkFun ElectronicsWire To Board ConnectorSFW20S-2STE1LF
SMD,P=1mm(交错脚)-55℃~+105℃ 1mm 20P 5.3mm Phosphor bronze Single-side Contact/Vertical Surface Mount,Vertical Tin SMD,P=1mm(交错脚) FFC, FPC (Flat Flexible) Connector Assemblies ROHSAmphenolFFC, FPC (Flat Flexible) Connector Assemblies
README
hardware/ledmodule/LED_Module_D/README.mdLED Module D
DO NOT USE
This module is flawed in countless ways, and I really recommend to not use it in any way. Not as it is, not as a basis for modification.
I just uploaded it for transparency, because I talk a lot about it on the Progress page. You can read about it's problems there.
Goal
This board should make it possible to have up to 10 high power LEDs with different colors aranged in a slim (2mm) and short (20mm) line. A TLC59711 is used to generate the 10 PWM signals, but it is not driving the LEDs directly. Instead, a line driver, MOSFETs and series resistors are used to power the LEDs without the complexities of a constant current drive.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C7, C8, C9, C11, C12 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4, H5, H6 |
| 4 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4 |
| 2 | 4700R | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 4700R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 2 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_02x05_Odd_Even | Own footprints:Dual Row Inverted Thru Board Card Edge Connector 02x05 Kyocera AVX 009159010603906 | J2, J3 |
| 2 | TCA6408ARSVR | FXL6408UMX:QFN40P180X260X55-16N | IC1, IC2 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather_WithMountingHoles | A1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J5 |
| 1 | D_Schottky | Own footprints:YFW SSL34F Schottky Diode | D1 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | PRT-14417 | PRT-14417:CONN_PRT-14417_SPK | J4 |
| 1 | R | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | SFW20S-2STE1LF | Own footprints:SFW20S2STE1LF_Own | J1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP2 |
| 1 | TXB0104RUT | Package_DFN_QFN:Texas_R-PUQFN-N12 | IC4 |
| 1 | VEML6040A3OG | VEML6040A3OG:VEML6040A3OG | IC3 |
The 40 most common of 41 parts.
More from lenaschimmel/bestelampe
12- 2 layers215.2 × 163.6 mm

- 2 layers214.6 × 70.5 mm

- 4 layers51.7 × 29.5 mm

- 4 layers140.8 × 26 mm

- 4 layers70 × 79.1 mm

- 2 layers83.8 × 61 mm

- 4 layers21.1 × 59.9 mm

- 2 layers110 × 80.4 mm

- 4 layers140.8 × 28.5 mm

- 2 layers65.5 × 58.4 mm

- 2 layers22.9 × 28.4 mm

- 6 layers

Similar boards
- 4 layers336.7 × 281.1 mm

- 2 layers58.5 × 85 mm

- 4 layers88.6 × 31 mm

- 2 layers41 × 28.6 mm

- 6 layers91.8 × 139.8 mm

- 4 layers289.4 × 318 mm

- 4 layers29.3 × 30 mm

PlajTime
Kybernetika-SPSE/RP_Straka
Vývoj se odehrává v jiném repozitáři na naší organizaci a zveřejníme ho až bude ve stabilnějším stádiu.
100 parts - 2 layers97.2 × 58.9 mm

Questions
How big is the Controller PCB?
It measures 56.5 × 124 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Controller use?
41 parts, built around the TCA6408ARSVR, VEML6040A3OG, TXB0104RUTR and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the lenaschimmel/bestelampe repository on GitHub, at the commit this page was made from: the board is hardware/abl/controller/controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask lenaschimmel before reusing the design.