

- Size
- 41 × 28.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 45
- Pads
- 212
- Tracks, vias
- 407, 109
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Nov 2019
- Updated
- 30 Apr 2020
Overview
SwarmBot is an open-source printed circuit board by keionbis, from the keionbis/Vision-Robot-Electronics repository on GitHub. It is a 2-layer board of 41 × 28.6 mm with 55 parts on 45 nets, routed with 407 tracks and 109 vias.
It is built around the STSPIN220, VEML6040A3OG and MAX7313ATG+, with the MIC5366-3.3YC5-TR among its other parts. Its parts include 19 resistors, 14 capacitors, 8 ICs, 4 diodes and 4 connectors.
Main components
4STSPIN220
VFQFPN-16(3x3)-40℃~+150℃ 1.3A 1.8V~10V 2 256、1、4、8、16、32、64、128 400mΩ Yes VFQFPN-16(3x3) Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor DriverVEML6040A3OG
OPLGA-4(1.3x2)-40℃~+85℃ 1.25mm 16.496klx 16bit 1mm 2.5V~3.6V 2mm Color Recognition I2C Red, Green, Blue, White OPLGA-4(1.3x2) Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsMAX7313ATG+
TQFN-24-EP(4x4)-40℃~+125℃ 1.2uA 16 260mV 2V~3.6V 400kHz 50mA 64 Cascading and address extension、Built-in LED driver、PWMOptocouplers I2C Interrupt Output Open-drain TQFN-24-EP(4x4) I/O Expanders ROHSMaxim Integrated (Analog Devices)I/O ExpandersMIC5366-3.3YC5-TR
SC-70-5-40℃~+125℃@(Tj) 1 150mA 155mV@(150mA) 200uVrms 29uA 3.3V 5.5V Fixed Over Current Protection、Over Temperature Protection Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C6, C8, C9, C20, C21 |
| 6 | MountingHole | MountingHole:MountingHole_2.5mm | H3, H4, H5, H6, H7, H8 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C7, C10, C12 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R5, R11, R13 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R6, R9, R14 |
| 4 | 200m | Resistor_SMD:R_0402_1005Metric | R7, R8, R19, R20 |
| 3 | 330R | Resistor_SMD:R_0402_1005Metric | R16, R17, R22 |
| 3 | WHITE | LED_SMD:LED_0603_1608Metric | D1, D2, D4 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R12 |
| 2 | 22nF | Capacitor_SMD:C_0402_1005Metric | C2, C5 |
| 2 | 470R | Resistor_SMD:R_0402_1005Metric | R15, R18 |
| 2 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Right | J1, J2 |
| 2 | STSPIN220 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U1, U2 |
| 2 | VEML6040A3OG | VEML6040A3OG:VEML6040A3OG | IC1, IC3 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Right | J3 |
| 1 | Conn_01x08_Female | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J6 |
| 1 | MAX7313ATG+ | MAX7313ATG+:QFN50P400X400X80-25N | IC2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MIC5366-3.3YC5 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | TCA9548AMRGER | Package_DFN_QFN:Texas_RGE0024C_EP2.1x2.1mm | U5 |
| 1 | UV | LED_SMD:LED_0603_1608Metric | D5 |
More from keionbis/Vision-Robot-Electronics
2- 4 layers

- 2 layers

Similar boards
- 4 layers336.7 × 281.1 mm

- 2 layers58.5 × 85 mm

- 4 layers88.6 × 31 mm

- 4 layers56.5 × 124 mm

- 2 layers63.5 × 30.5 mm

- 4 layers40.6 × 43.2 mm

- 4 layers41.7 × 30.5 mm

Project STM32
edenbwt/STM32_Learning
This repository contains my KiCad files and projects for learning microelectronics and STM32 MCU development.
34 parts - 2 layers74.2 × 5.5 mm

Questions
How big is the SwarmBot PCB?
It measures 41 × 28.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SwarmBot use?
55 parts, built around the STSPIN220, VEML6040A3OG, MAX7313ATG+ and MIC5366-3.3YC5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SwarmBot KiCad files?
From the keionbis/Vision-Robot-Electronics repository on GitHub, at the commit this page was made from: the board is SwarmBotBottom/SwarmBot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SwarmBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask keionbis before reusing the design.