
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

A WiFi-enabled keg and tap list solution.
Keg Cop - 6-way Breakout is an open-source printed circuit board by lbussy, from the lbussy/keg-cop repository on GitHub, published under the MIT licence. It is a 2-layer board of 35 × 51 mm with 8 parts on 8 nets, routed with 16 tracks and 0 vias.
It is built around the RJ45. It belongs with the radio and wireless and interfaces and adapters boards of this library.
This PCB interfaces between the main Keg Cop board and up to six flow meters, which will connect via board-mounted JST-XH connectors. This PCB is not designed to daisy-chain.
This PCB was designed using KiCad 6.0, a free and open-source, cross-platform electronics design suite. Design files are provided if you'd like to make changes to the design. Otherwise, you can download the .zip file from the Gerber directory and upload to your PCB fab of choice.
Front: 
Back: 
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J1, J2 |
| 1 | Meter 1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | Meter 2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | Meter 3 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | Meter 4 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | Meter 5 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | Meter 6 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
It measures 35 × 51 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lbussy/keg-cop repository on GitHub, at the commit this page was made from: the board is pcb/Breakouts/meter-breakout-6way/Keg Cop - 6-way Breakout.kicad_pcb and its schematic pcb/Breakouts/meter-breakout-6way/Keg Cop - 6-way Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).