Skip to the content
2 layers250 × 100 mmFightPadBoardDesign, the printed circuit board in 3D

FightPadBoardDesign

laxlucien/Fight_Pad
Size
250 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
51
Pads
144
Tracks, vias
239, 32
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 May 2026
Updated
5 Aug 2026

Overview

FightPadBoardDesign is an open-source printed circuit board by laxlucien, from the laxlucien/Fight_Pad repository on GitHub, published under the MIT licence. It is a 2-layer board of 250 × 100 mm with 30 parts on 51 nets, routed with 239 tracks and 32 vias.

It is built around the 1N4148W. Its parts include 14 diodes and 1 IC. It belongs with the ESP32 boards of this library.

Main components

1

Parts

30
QtyValueFootprintReferences
141N4148WDiode_SMD:D_SOD-123D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14
1Adafruit_Feather_HUZZAH32_ESP32Module:Adafruit_FeatherA1
1Combo 1keyboard_Switch_MX:SW_MX_1uMX9
1Combo 2keyboard_Switch_MX:SW_MX_1uMX10
1Combo 3keyboard_Switch_MX:SW_MX_1uMX11
1Combo 4keyboard_Switch_MX:SW_MX_1uMX12
1Downkeyboard_Switch_MX:SW_MX_1uMX4
1Kick 1keyboard_Switch_MX:SW_MX_1uMX6
1Kick 2keyboard_Switch_MX:SW_MX_1uMX8
1Leftkeyboard_Switch_MX:SW_MX_1uMX1
1Otherkeyboard_Switch_MX:SW_MX_1uMX14
1Punch 1keyboard_Switch_MX:SW_MX_1uMX5
1Punch 2keyboard_Switch_MX:SW_MX_1uMX7
1Rightkeyboard_Switch_MX:SW_MX_1uMX3
1Startkeyboard_Switch_MX:SW_MX_1uMX13
1Upkeyboard_Switch_MX:SW_MX_1uMX2
1~adafruit:EYESPIU1

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 4 layers95.6 × 73.6 mmMathpad, the printed circuit board in 3D

    Mathpad

    Summa-Cogni/Mathpad

    A mathematical keypad for students and professionals

    93 parts243
  • 2 layers141.5 × 83 mmRolio, the printed circuit board in 3D

    Rolio

    MickiusMousius/Rolio46Keyboard

    A split wireless keyboard based on the Corne and Sofle

    110 parts236MIT
  • 6 layers160 × 100 mmAdrmu6layer, the printed circuit board in 3D

    Adrmu6layer

    marcoreps/ADRmu

    ADR1000 10V standard

    240 parts149
  • 2 layers99.1 × 90.7 mmBgkeeb, the printed circuit board in 3D

    Bgkeeb

    sadekbaroudi/bgkeeb

    This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

    108 parts108
  • 2 layers229.8 × 102.6 mmBw2, the printed circuit board in 3D

    Bw2

    hazels-garage/bad-wings

    Bad Wings

    107 parts107CC-BY-SA-4.0

Questions

How big is the FightPadBoardDesign PCB?

It measures 250 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FightPadBoardDesign use?

30 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FightPadBoardDesign KiCad files?

From the laxlucien/Fight_Pad repository on GitHub, at the commit this page was made from: the board is kicad/fightPadBoardDesign.kicad_pcb and its schematic kicad/fightPadBoardDesign.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FightPadBoardDesign design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).