
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!

this project is a pcb and programing project. it is designed to be able to read the temperature of any diode based on its non ideal diode factor. It is also designed to read an i2c EEPROM for serial identification and incorporates itself with a gui
TempMonitorRev3.0 is an open-source printed circuit board by lawrancekiamilev, from the lawrancekiamilev/FourChannelDiodebasedTemperatureMonitor repository on GitHub. It is a 4-layer board of 69 × 94 mm with 144 parts on 117 nets, routed with 932 tracks and 323 vias.
It is built around the RP2040, ADS1115IDGS and OPA348AIDCKR-MS, with the W25Q16JVSSIQ, PS2381-1Y-F3-AX and REF3320AIDBZR among its other parts. Its parts include 59 resistors, 37 capacitors, 15 ICs, 11 connectors and 5 diodes. It belongs with the RP2040 boards of this library.
this project is a pcb and programing project. it is designed to be able to read the temperature of any diode based on its non ideal diode factor. It is also designed to read an i2c EEPROM for serial identification and incorporates itself with a gui
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10k | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14, R15, R20, R21, R23, R24, R27, R30, R35, R36, R47, R48, R56 +9 |
| 16 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C11, C12, C16, C24, C28, C33, C36, C38, C40, C43, C45, C53, C56, C59 |
| 11 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | 3.3V1, GND1, GND2, GND3, GND4, GND5, GND6, GND7, SCL1, SDA1, VDDA1 |
| 10 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R51, R54, R67, R68, R69, R70, R76, R77, R78, R79 |
| 9 | 100nf | Capacitor_SMD:C_0603_1608Metric | C27, C29, C30, C32, C34, C35, C39, C41, C42 |
| 7 | 330R | Resistor_SMD:R_0603_1608Metric | R5, R17, R28, R29, R33, R49, R50 |
| 5 | 0R | Resistor_SMD:R_0603_1608Metric | R55, R63, R64, R65, R66 |
| 4 | CN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4, D5 |
| 4 | DF11-4DP-2DS(52) | LawranceUserLib:HRS_DF11-4DP-2DS_52_ | J2, J4, J5, J7 |
| 4 | DF51KB-4DP-2DS(800) | LawranceUserLib:DF51K-4DS-2C(800) | J1, J3, J6, J8 |
| 3 | TL3330AF130QG | LawranceUserLib:TL3330 | B1, B2, B3 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R52, R53 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C9, C14 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R9 |
| 2 | 1uf | Capacitor_SMD:C_0603_1608Metric | C26, C37 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 33pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 75R | Resistor_SMD:R_0603_1608Metric | R58, R59 |
| 2 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U14, U17 |
| 2 | OPA348AIDCKR | LawranceUserLib:OPAx348 | U13, U15 |
| 2 | PS2381-1Y-F3-AX | LawranceUserLib:LSOP-4 (2.54mm) | U18, U19 |
| 2 | REF3320AIDBZR | Package_TO_SOT_SMD:SOT-23 | U9, U10 |
| 2 | ~ | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | U20, U21 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 2M | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 3.3V | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 3.3uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 51k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 6.8uF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | AZ1117IH-3.3TRG1 | LawranceUserLib:AZ11171 | U4 |
| 1 | PM254-1-14-Z-8.5 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J9 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias | U3 |
| 1 | S6B-XH-A | Connector_JST:JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J12 |
| 1 | SZ2012K272TF | Resistor_SMD:R_0805_2012Metric | FB1 |
| 1 | TAXM12M4RKDCDT2T | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TCA9548APWR | LawranceUserLib:TCA9548A | U2 |
| 1 | TMUX1309PWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U6 |
| 1 | USB_B | LawranceUserLib:USB_B_OST_USB-B1HSxx_Horizontal | J10 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U5 |
The 143 most common of 144 parts.

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!

sandman21vs/SandKrux
Placa de desenvolvimento baseada no chip K210, com entradas para touch, câmera e LCD grande, criada especificamente para rodar o firmware Krux.


reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad




HasiKe/Exhaust-Mic
Motorcycle Exhaust and Intake Microphone for best soud on Videos.
It measures 69 × 94 mm and has 4 copper layers, 1.6 mm thick.
144 parts, built around the RP2040, ADS1115IDGS, OPA348AIDCKR-MS and W25Q16JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lawrancekiamilev/FourChannelDiodebasedTemperatureMonitor repository on GitHub, at the commit this page was made from: the board is PCBFiles/TempMonitorRev3.0.kicad_pcb and its schematic PCBFiles/ADC-CurrentSource.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lawrancekiamilev before reusing the design.