4 layers114.3 × 108 mm
Pellet
Mouse-GYM/auto-trainer-hardware
Repository for hardware, firmware, and software related to the Mouse-GYM modules
202 parts
6 layers30 × 50 mm
ESP32-C6 Controller
j-alloy/ESP-C6_CustomTo develop a Custom ESP32-C6 for study
- Size
- 30 × 50 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 50
- Pads
- 203
- Tracks, vias
- 532, 102
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Jun 2024
- Updated
- 23 Feb 2025
Overview
ESP32-C6 Controller is an open-source printed circuit board by j-alloy, from the j-alloy/ESP-C6_Custom repository on GitHub. It is a 6-layer board of 30 × 50 mm with 54 parts on 50 nets, routed with 532 tracks and 102 vias.
It is built around the ESP32-C6, W25Q16JVSSIQ and AZ1117IH-3.3TRG1, with the ESD122DMYR, AMCA31-2R450G-S1F-T3 and BLM18KG121TN1D among its other parts. Its parts include 20 capacitors, 13 resistors, 4 ICs, 3 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
9
ESP32-C6
QFN-40-EP(5x5)QFN-40-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)
W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AZ1117IH-3.3TRG1
SOT-223-40℃~+125℃@(Tj) 1 1.3V@(0.8A) 15V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedUncategorised
ESD122DMYR
X2-SON-3(0.6x1.3)-40℃~+125℃ 0.2pF 10nA 2 2.5A@8/20us 20W@8/20us 3.6V 7.9V 8.4V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 X2-SON-3(0.6x1.3) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
AMCA31-2R450G-S1F-T3
1206-40℃~+85℃ 0.5dBi 1.2mm 1.6mm 100MHz 2 2.45GHz 3.2mm 3W 50Ω Patch Antenna 1206 Antennas ROHSAbraconAntennas
BLM18KG121TN1D
06031 120Ω@100MHz 30mΩ 3A ±25% 0603 Ferrite Beads ROHSMurataFerrite Beads
ECS-400-10-37B2-CKY-TR
SMD2016-4P-30℃~+85℃ 10pF 40MHz 40Ω Crystal Oscillator ±10ppm ±10ppm SMD2016-4P Crystals ROHSECSCrystals
SC32S-7PF20PPM
SMD3215-2P-40℃~+85℃ 32.768kHz 70kΩ 7pF Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSSeikoCrystals
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdESP-C6_Custom
To develop a Custom ESP32-C6 for study
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | TBC | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C12 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R4, R5 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C8, C13 |
| 2 | 1.5p | Capacitor_SMD:C_0603_1608Metric | C19, C21 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C5, C7 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C17, C18 |
| 2 | 499 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | Conn_01x12 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | 1_ESP32:SW4_PTS815 SJM 250 SMTR LFS_CNK | SW1, SW2 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1000 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 150p | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 2.4nH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2nH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 600 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 7.5M | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | AMCA31-2R450G-S1F-T3 | 1_ESP32:XDCR_AMCA31-2R450G-S1F-T3 | E1 |
| 1 | AZ1117IH-3.3TRG1 | 1_ESP32:SOT223_AZ1117I_6P5X3P5_DIO | U3 |
| 1 | BLM18KG121TN1D | Inductor_SMD:L_CommonModeChoke_Coilcraft_0603USB | FB1 |
| 1 | ECS-400-10-37B2-CKY-TR | 1_ESP32:ECX-1637B2_ECS | XTAL1 |
| 1 | ESD122DMYR | 1_ESP32:DMY0003A | U4 |
| 1 | ESP32-C6 | Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm | U1 |
| 1 | Fuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | SC32S-7PF20PPM | 1_ESP32:XTAL_SC32S-7PF20PPM_EPS | XTAL2 |
| 1 | TBC | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | USB4105-GF-A | 1_ESP32:GCT_USB4105-GF-A | J1 |
| 1 | W25Q16JVSSIQ | 1_ESP32:W25Q16JVSSIQ_WIN | U2 |
Similar boards
- 4 layers25.4 × 60 mm
ESP32S3 RF DevBoard
lilnetty43/esp32-s3-rf-devboard_akel
This project is a custom 4-layer development board built around the ESP32-S3. I designed the board to expand my PCB design experience into an RF-aware layout, multi-layer stackup design, controlled-impedance USB…
35 parts - 4 layers18 × 29 mm
Esp32c6-pico
TreeNewbeer/esp32c6-pico
2026-09-11 第一版 PCB 提交快照：保留用户在居中后对 R19、R15、局部短线及图形的继续调整；R19 / R15 当前坐标为 (115.70, 120.40) / (115.70, 122.36) mm。已重新填铜并同步贴装坐标、二维预览和报告，ERC 0、DRC 错误 0 / 丝印警告 1、未连接 0、一致性问题 0，QA 39/53。见 当前提交记录。以下居中对比及旧 3D 图保留为历史记录。
59 parts - 4 layers50 × 50 mm
Watch wearable
TENNLab-UTK/NWRIST
Code and KiCAD PCB design for the NWRIST: Neuromorphic Wearable for Real-Time Intelligent Sensing Technology paper
79 parts - 4 layers85 × 56 mm
- 2 layers31.5 × 96.7 mm
- 4 layers100 × 100 mm
Hw alpha
Yexall/CPE-450.Capstone
Fall 24 - Winter 25 Cal Poly Capstone project by Haas Hooligans. This projects aims to build a machine monitoring system for the Cal Poly IME department.
171 parts - 4 layers69 × 94 mm
TempMonitorRev3.0
lawrancekiamilev/FourChannelDiodebasedTemperatureMonitor
this project is a pcb and programing project. it is designed to be able to read the temperature of any diode based on its non ideal diode factor.
144 parts
Questions
How big is the ESP32-C6 Controller PCB?
It measures 30 × 50 mm and has 6 copper layers, 1.6 mm thick.
What parts does the ESP32-C6 Controller use?
54 parts, built around the ESP32-C6, W25Q16JVSSIQ, AZ1117IH-3.3TRG1 and ESD122DMYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-C6 Controller KiCad files?
From the j-alloy/ESP-C6_Custom repository on GitHub, at the commit this page was made from: the board is ESP32-C6_Controller.kicad_pcb and its schematic ESP32-C6_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-C6 Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask j-alloy before reusing the design.