
WellD
kinggh0stee/WellD
ESP32-C6 Zigbee well monitor — reads a 4–20 mA pressure transducer and DS18B20, reports water level, temperature, and battery to Zigbee2MQTT with OTA update support
Espressif SystemsExtended
QFN-40-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHS
The ESP32-C6 is a microcontroller made by Espressif Systems in a QFN-40-EP(5x5) package with 41 pins. QFN-40-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (Espressif:ESP32-C6, from Espressif) and its footprint (EasyEDA_Cloud:QFN-40_L5.0-W5.0-P0.40-TL-EP3.3, from EasyEDA), ready for a KiCad board. 982 are in stock at JLCPCB (part C5364646). 12 open-source boards in 11 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 允许输入电压 输入电源管脚 | min -0.3 · max 3.6 V | 58 | |
| IO 输出总电流 Ioutput | 25 °C, all IO held high and grounded continuously for 24 hours | max 1000 mA | 58 |
| 存储温度 TST ORE | min -40 · max 150 °C | 58 | |
| 建议输入电压 VDDA1, VDDA2, VDDA3P3 | min 3 · typ 3.3 · max 3.6 V | 58 | |
| 建议输入电压 VDDPST1 | min 3 · typ 3.3 · max 3.6 V | 58 | |
| VDD_SPI(输入) VDD_SPI | min 3 · typ 3.3 · max 3.6 V | 58 | |
| 建议输入电压 VDDPST2 | Account for RSPI voltage drop when supplying VDD_SPI; maximum 3.3 V when programming eFuse | min 3 · typ 3.3 · max 3.6 V | 58 |
| 输入总电流 IV DD | min 0.5 A | 58 | |
| 环境温度 TA | min -40 · max 105 °C | 58 | |
| RSP I RSP I | VDD_SPI connected to 3.3 V flash, powered from VDDPST2 through RSPI | typ 3 Ω | 59 |
| 管脚电容 CIN | 3.3 V, 25 °C | typ 2 pF | 59 |
| 低电平输入电压 VIL | 3.3 V, 25 °C; VDD is the respective power-domain supply voltage | min -0.3 V | 59 |
| 高电平输入电流 IIH | 3.3 V, 25 °C | max 50 nA | 59 |
| 低电平输入电流 IIL | 3.3 V, 25 °C | max 50 nA | 59 |
| 高电平拉电流 IOH | VDD = 3.3 V, VOH >= 2.64 V, PAD_DRIVER = 3; 25 °C | typ 40 mA | 59 |
| 低电平灌电流 IOL | VDD = 3.3 V, VOL = 0.495 V, PAD_DRIVER = 3; 25 °C | typ 28 mA | 59 |
| 内部弱上拉电阻 RP U | 3.3 V, 25 °C | typ 45 kΩ | 59 |
| 内部弱下拉电阻 RP D | 3.3 V, 25 °C | typ 45 kΩ | 59 |
| 芯片复位电压 VIL_nRST | CHIP_PU; 3.3 V, 25 °C | min -0.3 V | 59 |
| DNL(差分非线性) DNL | External 100 nF capacitor, DC input, 25 °C, Wi-Fi off | min -8 · max 12 LSB | 60 |
| INL(积分非线性) INL | External 100 nF capacitor, DC input, 25 °C, Wi-Fi off | min -10 · max 10 LSB | 60 |
| 采样速度 | External 100 nF capacitor, DC input, 25 °C, Wi-Fi off | max 100 kSPS | 60 |
| 总误差 | Hardware and software calibration; ATTEN0, effective measurement range 0 ~ 1000 mV; applicable date codes as noted | min -12 · max 12 mV | 60 |
| 总误差 | Hardware and software calibration; ATTEN1, effective measurement range 0 ~ 1300 mV; applicable date codes as noted | min -12 · max 12 mV | 60 |
| 总误差 | Hardware and software calibration; ATTEN2, effective measurement range 0 ~ 1900 mV; applicable date codes as noted | min -23 · max 23 mV | 60 |
| 总误差 | Hardware and software calibration; ATTEN3, effective measurement range 0 ~ 3300 mV; applicable date codes as noted | min -40 · max 40 mV | 60 |
| 峰值 | Active TX; 802.11b, 1 Mbps, DSSS @ 21.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 354 mA | 60 |
| 峰值 | Active TX; 802.11g, 54 Mbps, OFDM @ 19.5 dBm; 3.3 V, 25 °C, 100% duty cycle | max 300 mA | 60 |
| 峰值 | Active TX; 802.11n, HT20, MCS7 @ 18.5 dBm; 3.3 V, 25 °C, 100% duty cycle | max 280 mA | 60 |
| 峰值 | Active TX; 802.11n, HT40, MCS7 @ 18.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 268 mA | 60 |
| 峰值 | Active TX; 802.11ax, MCS9 @ 16.5 dBm; 3.3 V, 25 °C, 100% duty cycle | max 252 mA | 60 |
| 峰值 | Active RX; 802.11b/g/n, HT20; 3.3 V, 25 °C, peripherals off, CPU idle | max 78 mA | 60 |
| 峰值 | Active RX; 802.11n, HT40; 3.3 V, 25 °C, peripherals off, CPU idle | max 82 mA | 60 |
| 峰值 | Active RX; 802.11ax, HE20; 3.3 V, 25 °C, peripherals off, CPU idle | max 78 mA | 61 |
| 峰值 | Active TX; Bluetooth LE @ 20.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 315 mA | 61 |
| 峰值 | Active TX; Bluetooth LE @ 9.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 190 mA | 61 |
| 峰值 | Active TX; Bluetooth LE @ 0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 130 mA | 61 |
| 峰值 | Active TX; Bluetooth LE @ –15.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 94 mA | 61 |
| 峰值 | Active RX; Bluetooth LE; 3.3 V, 25 °C, peripherals off, CPU idle | max 71 mA | 61 |
| 峰值 | Active TX; 802.15.4 @ 20.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 305 mA | 61 |
| 峰值 | Active TX; 802.15.4 @ 12.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 187 mA | 61 |
| 峰值 | Active TX; 802.15.4 @ 0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 119 mA | 61 |
| 峰值 | Active TX; 802.15.4 @ –15.0 dBm; 3.3 V, 25 °C, 100% duty cycle | max 92 mA | 61 |
| 峰值 | Active RX; 802.15.4; 3.3 V, 25 °C, peripherals off, CPU idle | max 74 mA | 61 |
| CPU 工作 | 160 MHz, all peripheral clocks off | typ 27 mA | 61 |
| CPU 工作 | 160 MHz, all peripheral clocks on | typ 38 mA | 61 |
| CPU 空闲 | 160 MHz, all peripheral clocks off | typ 17 mA | 61 |
| CPU 空闲 | 160 MHz, all peripheral clocks on | typ 28 mA | 61 |
| CPU 工作 | 80 MHz, all peripheral clocks off | typ 19 mA | 61 |
| CPU 工作 | 80 MHz, all peripheral clocks on | typ 30 mA | 61 |
| CPU 空闲 | 80 MHz, all peripheral clocks off | typ 14 mA | 61 |
| CPU 空闲 | 80 MHz, all peripheral clocks on | typ 25 mA | 61 |
| Light-sleep | CPU and wireless power off, peripheral clocks off, all GPIO high impedance | typ 180 uA | 61 |
| Light-sleep | CPU, wireless and peripherals powered off, all GPIO high impedance | typ 35 uA | 61 |
| Deep-sleep | RTC timer and LP memory powered | typ 7 uA | 61 |
| 关闭 | CHIP_PU low, chip off | typ 1 uA | 62 |
| ESD(静电放电敏感度) | HBM(人体放电模式), JS-001 | min -2000 · max 2000 V | 62 |
| ESD(静电放电敏感度) | CDM(充电器件模式), JS-002 | min -1000 · max 1000 V | 62 |
| 802.11n, HT40, MCS0 | typ 28 dB | 66 | |
| 802.11n, HT40, MCS7 | typ 10 dB | 66 | |
| 802.11ax, HE20, MCS0 | typ 25 dB | 66 | |
| 802.11ax, HE20, MCS9 | typ 2 dB | 66 | |
| 工作信道中心频率范围 | min 2402 · max 2480 MHz | 66 | |
| 射频发射功率范围 | min -15 · max 20 dBm | 66 | |
| 载波频率偏移和漂移 | Max. |fn |n=0, 1, 2, 3, k | typ 1.3 kHz | 66 |
| 载波频率偏移和漂移 | Max. |f0 − fn |n=2, 3, 4, k | typ 1.5 kHz | 66 |
| 载波频率偏移和漂移 | Max. |fn − fn−5 |n=6, 7, 8, k | typ 0.9 kHz | 66 |
| 载波频率偏移和漂移 | |f1 − f0 | | typ 0.6 kHz | 66 |
| 调制特性 ∆ F 1avg | typ 249.9 kHz | 66 | |
| 调制特性 | Min. ∆ F 2max (至少 99.9% 的 ∆ F 2max ) | typ 212.1 kHz | 66 |
| 调制特性 ∆ F 2avg /∆ F 1avg | typ 0.88 — | 66 | |
| 带内发射 | ± 2 MHz 偏移 | typ -29 dBm | 66 |
| 带内发射 | ± 3 MHz 偏移 | typ -36 dBm | 66 |
| 带内发射 | > ± 3 MHz 偏移 | typ -39 dBm | 66 |
| 载波频率偏移和漂移 | Max. |fn |n=0, 1, 2, 3, k | typ 2.2 kHz | 66 |
| 载波频率偏移和漂移 | Max. |f0 − fn |n=2, 3, 4, k | typ 1.1 kHz | 66 |
| 载波频率偏移和漂移 | Max. |fn − fn−5 |n=6, 7, 8, k | typ 1.1 kHz | 66 |
| 载波频率偏移和漂移 | |f1 − f0 | | typ 0.5 kHz | 66 |
| 调制特性 ∆ F 1avg | typ 499.4 kHz | 66 | |
| 调制特性 | Min. ∆ F 2max (至少 99.9% 的 ∆ F 2max ) | typ 443.5 kHz | 66 |
| 调制特性 ∆ F 2avg /∆ F 1avg | typ 0.95 — | 67 | |
| 带内发射 | ± 4 MHz 偏移 | typ -40 dBm | 67 |
| 带内发射 | ± 5 MHz 偏移 | typ -41 dBm | 67 |
| 带内发射 | > ± 5 MHz 偏移 | typ -42 dBm | 67 |
| 载波频率偏移和漂移 | Max. |fn |n=0, 1, 2, 3, k | typ 0.7 kHz | 67 |
| 载波频率偏移和漂移 | Max. |f0 − fn |n=1, 2, 3, k | typ 0.3 kHz | 67 |
| 载波频率偏移和漂移 | |f0 − f3 | | typ 0.1 kHz | 67 |
| 载波频率偏移和漂移 | Max. |fn − fn−3 |n=7, 8, 9, k | typ 0.4 kHz | 67 |
| 调制特性 ∆ F 1avg | typ 250 kHz | 67 | |
| 调制特性 | Min. ∆ F 1max (至少 99.9% 的 ∆ F 1max ) | typ 238 kHz | 67 |
| 载波频率偏移和漂移 | Max. |fn |n=0, 1, 2, 3, k | typ 0.5 kHz | 67 |
| 调制特性 ∆ F 2avg | typ 230.7 kHz | 67 | |
| 调制特性 | Min. ∆ F 2max (至少 99.9% 的 ∆ F 2max ) | typ 217.6 kHz | 67 |
| 带内发射 | ± 2 MHz 偏移 | typ -28 dBm | 67 |
| 灵敏度 @30.8% PER | typ -98.5 dBm | 67 | |
| 最大接收信号 @30.8% PER | typ 8 dBm | 67 |

kinggh0stee/WellD
ESP32-C6 Zigbee well monitor — reads a 4–20 mA pressure transducer and DS18B20, reports water level, temperature, and battery to Zigbee2MQTT with OTA update support


notaroomba/ledify
A super small addressable LED controller with USB-C PD up to 100W, a switchable 5V/12V output and Bluetooth!

AngeloDuenas/SmartwatchProject
This is an ESP32 demo project showcasing LVGL v7 with support for several display controllers and touch controllers. The demo application is the lvdemowidgets project from the lvexamples repository.



phancak/ESP32C6_Board
A versatile ESP32-C6 expansion board featuring Wi-Fi 6 and Bluetooth 5, designed for modular integration in proof-of-concept embedded projects.

TreeNewbeer/esp32c6-pico
2026-09-11 第一版 PCB 提交快照:保留用户在居中后对 R19、R15、局部短线及图形的继续调整;R19 / R15 当前坐标为 (115.70, 120.40) / (115.70, 122.36) mm。已重新填铜并同步贴装坐标、二维预览和报告,ERC 0、DRC 错误 0 / 丝印警告 1、未连接 0、一致性问题 0,QA 39/53。见 当前提交记录。以下居中对比及旧 3D 图保留为历史记录。
Yes. The symbol is Espressif:ESP32-C6 and the footprint EasyEDA_Cloud:QFN-40_L5.0-W5.0-P0.40-TL-EP3.3, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-40-EP(5x5), with 41 pins. Its footprint is drawn on this page.
Espressif Systems publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5364646, with 982 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the ESP32-C61HR8 by Espressif Systems and the HT32F12364-40QFN by Holtek Semicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.
12 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.