
RC17
lansalot/AOG_Dev
Like AgOpenGPS but not. This version is constantly under development.

Like AgOpenGPS but not. This version is constantly under development.
NanoSprayLinear is an open-source printed circuit board by lansalot, from the lansalot/AOG_Dev repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 172.7 × 91.4 mm with 90 parts on 94 nets, routed with 804 tracks and 168 vias.
It is built around the DRV8251DDA, SS26 and BAT42, with the XF-506P and SMDRI127-680MT among its other parts. Its parts include 34 capacitors, 16 ICs, 13 diodes, 11 resistors and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Like AgOpenGPS but not. This version is constantly under development.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C9, C14, C15, C17, C19, C20, C24, C25, C27, C28, C31, C32, C33, C36, C37, C40 |
| 9 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.4 | C5, C16, C26, C29, C30, C34, C35, C38, C39 |
| 9 | DRV8251 | RC17Footprints:DRV8251ADDR | U4, U8, U9, U10, U11, U12, U13, U14, U17 |
| 7 | 470uF | Capacitor_SMD:CP_Elec_10x10.5 | C1, C2, C3, C4, C21, C22, C23 |
| 6 | SS26 | RC17Footprints:SMA(DO-214AC) | D2, D3, D4, D7, D11, D14 |
| 4 | 470 | Capacitor_SMD:C_0603_1608Metric | R1, R7, R8, R9 |
| 4 | BAT42 | RC17Footprints:SOD-323 | D9, D10, D12, D13 |
| 3 | 2.2K | Resistor_SMD:R_0603_1608Metric | R5, R6, R10 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D5, D8 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C13, C18 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | C492610 | RC17Footprints:Fuse_Holder_C492610 | F1, F2 |
| 2 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2, U5 |
| 2 | MCP6002-xP | RC17Footprints:SOIC127P600X175-8N | U6, U7 |
| 2 | MountingHole | MountingHole:MountingHole_5.3mm_M5_DIN965_Pad | H1, H2 |
| 2 | SMDRI127-680MT | RC17Footprints:TMPA1265SP-101MN-D | L1, L2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10K | RC17Footprints:Potentiometer | RV3 |
| 1 | 10k | RC17Footprints:Potentiometer | RV4 |
| 1 | 12V | RC17Footprints:PowerPin | J5 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 776087-1-776087-1 | RC17Footprints:7760871 | J2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Flow Ohms1 | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP7 |
| 1 | Flow Ohms2 | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP8 |
| 1 | Ground | RC17Footprints:PowerPin | J6 |
| 1 | LM7809_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | MCP23017_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U1 |
| 1 | PC817 | RC17Footprints:SMD-4_4.6x7.62mm_P2.54mm | U15 |
| 1 | Pressure Ohms1 | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP5 |
| 1 | Pressure Ohms2 | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP6 |



Poent/RC-Snowblower
Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.

aramder/orc
Open replacement controller board for surplus Motorola PMUN1046A relay boxes: ESP32-C3, CANopen control, 10 x 15 A channels. Independent project, not affiliated with Motorola Solutions.

mohamed-belal-10/can-motor-controller-node
CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB

anobli/pandora-hw
Open hardware designs for user-controlled smart home devices. Zephyr RTOS + Thread/WiFi connectivity. No cloud dependency, no vendor lock-in.


SK21/YieldFlo
YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield…
It measures 172.7 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
90 parts, built around the DRV8251DDA, SS26, BAT42 and XF-506P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lansalot/AOG_Dev repository on GitHub, at the commit this page was made from: the board is Sprayer/Board/NanoSprayLinear/NanoSprayLinear.kicad_pcb and its schematic Sprayer/Board/NanoSprayLinear/Analog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).