2 layers122 × 66 mm
2 layers30.5 × 17 mm
Settle
LakeMaps/Dartmouth1This is where the PCBs go
- Size
- 30.5 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 10
- Pads
- 26
- Tracks, vias
- 60, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Jul 2016
- Updated
- 25 Oct 2016
Overview
Settle is an open-source printed circuit board by LakeMaps, from the LakeMaps/Dartmouth repository on GitHub, published under the ISC licence. It is a 2-layer board of 30.5 × 17 mm with 6 parts on 10 nets, routed with 60 tracks and 2 vias.
It is built around the RJ45. Its parts include 2 capacitors, 2 connectors, 1 resistor and 1 diode.
Main components
1README
README.mdPCB
This is where the PCBs go, because "boat" was taken
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1u | Capacitors_SMD:C_0603_HandSoldering | C1 |
| 1 | 10u | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 150 | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | CONN_01X06 | Libraries:JST-6 | P1 |
| 1 | LED | LEDs:LED-5MM | D1 |
| 1 | RJ45 | Libraries:RJ45_Header | J1 |
More from LakeMaps/Dartmouth
3
Similar boards
- 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm
Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm
- 2 layers50 × 55.4 mm
- 2 layers67.9 × 47.8 mm
Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm
- 4 layers73.9 × 84.5 mm
Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm
Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46
Questions
How big is the Settle PCB?
It measures 30.5 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Settle use?
6 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Settle KiCad files?
From the LakeMaps/Dartmouth repository on GitHub, at the commit this page was made from: the board is Settle/settle.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Settle design in my own project?
Its repository publishes it under the ISC licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).