

Current controlled power supply
Repository of the complete documentation, software and hardware for the Black Crystal project
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 19
- Pads
- 77
- Tracks, vias
- 157, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Mar 2026
- Updated
- 17 Jun 2026
Overview
Current controlled power supply is an open-source printed circuit board by lab-laia, from the lab-laia/Black-Crystal repository on GitHub. It is a 2-layer board of 50 × 50 mm with 29 parts on 19 nets, routed with 157 tracks and 0 vias.
It is built around the MCP6004-E/P and TL431CLPM. Its parts include 13 resistors, 6 capacitors, 6 connectors and 1 IC. It belongs with the power boards of this library.
Main components
2MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierTL431CLPM
TO-92-2.6mm0℃~+70℃@(Ta) 100mA 1mA 2.495V~36V 2.495V~36V Adjustable Parallel ±2.2% TO-92-2.6mm Voltage Reference ROHSTexas InstrumentsVoltage Reference
README
README.mdWelcome to the
project!
Black Crystal is a complete, modular, and upgradeable photometry and fluorometry instrument capable of simultaneous multi-wavelength measurements. Best of all, it is fully open-source and 3D-printed.
The system features interchangeable LEDs for emission, allowing users to easily adapt the instrument to different applications and spectral ranges.
Here you will find everything needed to build and operate the instrument:
- Documentation: DOCUMENTATION folder
- CAD files and PCB schematics: HARDWARE folder
- Firmware and front end: SOFTWARE folder
A step-by-step roadmap (also available in full in the documentation folder):
- System Description: Overview of Black Crystal’s subsystems, components, and their interactions
- Bill of Materials (BOM): Complete list of parts required to build the instrument
- 3D Printing: Guidelines for optimal printing and part quality
- Construction Guide: Detailed, step-by-step instructions for hardware assembly and software setup
- Operation Guide: Instructions for operating the instrument and acquiring results
It is assumed that the builder/user has at least basic knowledge of electronics, Arduino programming, and familiarity with spectroscopy.
Happy building!
© 2026 Claudimir Lucio do Lago and Ivan Verlangieri. Hardware designs are licensed under CERN-OHL-P v2.0, software under the MIT License, and documentation under Creative Commons Attribution 4.0 International (CC BY 4.0). See the respective LICENSE files for full terms.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C2, C3, C4, C5, C6 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5, R7, R9 |
| 4 | 15k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R4, R6, R8 |
| 4 | Conn_01x02_Socket | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3, J4, J5, J6 |
| 3 | 50 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R10, R11, R12 |
| 1 | 2.2u | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P2.50mm | C1 |
| 1 | 50 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 500 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 5V | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | MCP6004 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | TL431CLPM | digikey-footprints:TO-92-3 | VR1 |
The 27 most common of 29 parts.
Similar boards
- 4 layers70.8 × 108 mm

- 4 layers60 × 94 mm

DaisySeedPedal125b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
80 parts559MIT - 2 layers75 × 100 mm

Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530 - 2 layers66 × 99 mm

Nucleo32TNC
mobilinkd/NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.
54 parts110GPL-3.0 - 2 layers171.5 × 106.7 mm

Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 2 layers267 × 300 mm

Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98 - 4 layers29 × 20.9 mm

Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
60 parts81MIT - 2 layers248.9 × 120.7 mm

16nx
16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.
171 parts76
Questions
How big is the Current controlled power supply PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Current controlled power supply use?
29 parts, built around the MCP6004-E/P and TL431CLPM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Current controlled power supply KiCad files?
From the lab-laia/Black-Crystal repository on GitHub, at the commit this page was made from: the board is HARDWARE/A/3/Current-controlled power supply.kicad_pcb and its schematic HARDWARE/A/3/Current-controlled power supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Current controlled power supply design in my own project?
Its repository states no licence, so its author keeps all rights: ask lab-laia before reusing the design.