2 layers88.9 × 127 mm
Valve Monitor ArduinoNano
lReddie/Valve_Driver_Arduino_Nano
Monitor and control 6 solenoid valve current using an arduino nano
183 parts
2 layers88.9 × 109.2 mm
Valve Driver ArduinoNano
lReddie/Valve_Driver_Arduino_NanoMonitor and control 6 solenoid valve current using an arduino nano
- Size
- 88.9 × 109.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 70
- Pads
- 311
- Tracks, vias
- 705, 100
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2022
- Updated
- 8 Aug 2022
Overview
Valve Driver ArduinoNano is an open-source printed circuit board by lReddie, from the lReddie/Valve_Driver_Arduino_Nano repository on GitHub. It is a 2-layer board of 88.9 × 109.2 mm with 108 parts on 70 nets, routed with 705 tracks and 100 vias.
Its parts include 44 resistors, 26 capacitors, 10 connectors, 9 ICs and 6 diodes. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R10, R11, R13, R15, R16, R17, R19, R20, R31, R34, R38, R40 +22 |
| 24 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C10, C11, C13, C14, C15, C16, C17, C18, C21, C22, C23, C24, C29 +8 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q4, Q7, Q10, Q13, Q17 |
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4, J5, J6, J8, J9 |
| 6 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6 |
| 6 | INA186 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3, U4, U7, U8, U11, U12 |
| 6 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R12, R14, R41, R43, R64, R66 |
| 6 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP0 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C31, C33 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Barrel_Jack | Connector_BarrelJack:CUI_PJ-082BH | J1 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08 | Connector_Phoenix_MSTB:PhoenixContact_MSTBV_2,5_8-GF-5,08_1x08_P5.08mm_Vertical_ThreadedFlange_MountHole | J10 |
| 1 | Conn_01x12 | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_12-G_1x12_P5.00mm_Vertical | J7 |
| 1 | LM340_SOT223 | Package_TO_SOT_SMD:SOT-223 | U14 |
| 1 | OPA333xxDBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | REF3033 | Package_TO_SOT_SMD:SOT-23 | U15 |
More from lReddie/Valve_Driver_Arduino_Nano
1Similar boards
- 2 layers89.2 × 82.6 mm
Desktop 50 Pin TopConn
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
108 parts459GPL-3.0 - 2 layers312 × 140 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers165 × 113 mm
- 2 layers262 × 113.9 mm
Quacken
Nuclear-Squid/Quacken
Libre, ergonomic, polymorphic: a single PCB for many possible layouts.
108 parts38GPL-3.0 - 2 layers87 × 87 mm
Cn tester panel
aroum/cn_tester
c!n tester is a hardware and software system designed for testing ProMicro-like microcontrollers.
108 parts37MIT - 2 layers161.5 × 106 mm
WaccaProtocolTranslator
FizzyApple12/Waccon
A repository for all of the files in my design for an open-source touch ring controller.
108 parts33 - 2 layers258.2 × 96.8 mm
Narfkb
sebastian-stumpf/narfkb
rp2040 powered split keyboard with rotary encoders and 6mm tactile buttons
108 parts29MIT
Questions
How big is the Valve Driver ArduinoNano PCB?
It measures 88.9 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Valve Driver ArduinoNano use?
108 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Valve Driver ArduinoNano KiCad files?
From the lReddie/Valve_Driver_Arduino_Nano repository on GitHub, at the commit this page was made from: the board is Valve_Driver_ArduinoNano/Valve_Driver_ArduinoNano.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Valve Driver ArduinoNano design in my own project?
Its repository states no licence, so its author keeps all rights: ask lReddie before reusing the design.