2 layers88.9 × 109.2 mm
Valve Driver ArduinoNano
lReddie/Valve_Driver_Arduino_Nano
Monitor and control 6 solenoid valve current using an arduino nano
108 parts
2 layers88.9 × 127 mm
Valve Monitor ArduinoNano
lReddie/Valve_Driver_Arduino_NanoMonitor and control 6 solenoid valve current using an arduino nano
- Size
- 88.9 × 127 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 183
- Nets
- 147
- Pads
- 480
- Tracks, vias
- 991, 129
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2022
- Updated
- 8 Aug 2022
Overview
Valve Monitor ArduinoNano is an open-source printed circuit board by lReddie, from the lReddie/Valve_Driver_Arduino_Nano repository on GitHub. It is a 2-layer board of 88.9 × 127 mm with 183 parts on 147 nets, routed with 991 tracks and 129 vias.
It is built around the LMV331TP. Its parts include 82 resistors, 39 capacitors, 18 diodes, 18 transistors and 15 ICs. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
183| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R10, R11, R13, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +60 |
| 34 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +18 |
| 18 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18 +2 |
| 15 | LED | LED_SMD:LED_1206_3216Metric | D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18 |
| 6 | INA186 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3, U4, U7, U8, U11, U12 |
| 6 | LMV331 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1, U2, U5, U6, U9, U10 |
| 6 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R12, R14, R41, R43, R64, R66 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C26, C28, C31, C33 |
| 4 | Conn_02x04_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J3, J4, J5, J6 |
| 3 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3 |
| 2 | LM340_SOT223 | Package_TO_SOT_SMD:SOT-223 | U13, U14 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Barrel_Jack | Connector_BarrelJack:CUI_PJ-082BH | J1 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | REF3033 | Package_TO_SOT_SMD:SOT-23 | U15 |
The 179 most common of 183 parts.
More from lReddie/Valve_Driver_Arduino_Nano
1Similar boards
- 4 layers45 × 24 mm
- 2 layers354 × 295.1 mm
SV PWM card R01
mariusenglund/three-phase-inverter
Materials for enhancing the DC-to-AC converter that was designed as part of our bachelor's thesis in the spring of 2023.
257 parts2GPL-3.0 - 2 layers
- 4 layers51.5 × 21 mm
Pico-2v
lucasbaizer/pico-2v
RP2354A development board with switchable voltage, QSPI breakout, and more
53 parts1 - 4 layers230 × 152 mm
SENTINEL TRM
ajisrawi/sentinel-uhf-radar
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
144 parts - 6 layers120.5 × 72.9 mm
- 4 layers83.2 × 78.1 mm
- 4 layers100.5 × 82.8 mm
Questions
How big is the Valve Monitor ArduinoNano PCB?
It measures 88.9 × 127 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Valve Monitor ArduinoNano use?
183 parts, built around the LMV331TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Valve Monitor ArduinoNano KiCad files?
From the lReddie/Valve_Driver_Arduino_Nano repository on GitHub, at the commit this page was made from: the board is Valve_Monitor_ArduinoNano/Valve_Monitor_ArduinoNano.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Valve Monitor ArduinoNano design in my own project?
Its repository states no licence, so its author keeps all rights: ask lReddie before reusing the design.