

Driver Inductor
- Size
- 120.5 × 72.9 mm
- Copper layers
- 6
- Thickness
- 2 mm
- Parts
- 99
- Nets
- 84
- Pads
- 354
- Tracks, vias
- 477, 109
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Oct 2023
- Updated
- 25 Aug 2025
Overview
Driver Inductor is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/Inductor-80kWt repository on GitHub. It is a 6-layer board of 120.5 × 72.9 mm with 99 parts on 84 nets, routed with 477 tracks and 109 vias.
It is built around the R-783.3-1.0, R-785.0-1.0 and ADM3485EARZ, with the WRA1215S-3WR2, 74LVC1G04Z and ADUM1200AR among its other parts. Its parts include 37 capacitors, 33 resistors, 18 diodes, 6 ICs and 5 connectors.
Main components
11R-783.3-1.0
SIP,11.5x7.5mm1 1A 3.3V 3W 4.75V~18V 90% SIP,11.5x7.5mm Isolated Power Modules ROHSRECOM PowerIsolated Power ModulesR-785.0-1.0
SIP-31 1A 5V 5W 6.5V~18V 94% SIP-3 Isolated Power Modules ROHSRECOM PowerIsolated Power ModulesADM3485EARZ
SOP-81 1 10Mbps 256 3V~5.5V 700uA Enable shutdown、Overcurrent Protection、Thermal shutdown protection、Low-power mode、Tx/Rx enable Half-Duplex Transceiver ±15kV SOP-8 RS-485 / RS-422 ICs ROHSTECH PUBLICRS-485 / RS-422 ICsWRA1215S-3WR2
SIP,22x9.5mmIsolated Power ModulesYLPTEC74LVC1G04Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 200uA 32mA 32mA 5ns@5V,50pF 700mV~800mV 74LVC SOT-553 Inverters ROHSDiodes IncorporatedInvertersADUM1200AR
SOIC-8-40℃~+105℃ 0 150ns 1Mbps 2 2.7V~5.5V 2.7V~5.5V 2500 35kV/us SOIC-8 Digital Isolators ROHSAnalog DevicesDigital IsolatorsLM1117GS-3.3
SOT-223-3L-40℃~+125℃@(Tj) 1 1.2V@(1A) 100uV 12V 1A 3.3V 5mA 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHTCVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLMV331TP
SOT-23-5-55℃~+125℃ 0.8uV/℃ 1 1.8V~5.5V 1pA 2pA 50uA 7V 800uV 950ns Open-drain Rail-to-rail input SOT-23-5 Comparators ROHSTECH PUBLICComparatorsMMSZ5240B
SOD-123-65℃~+150℃ 1 Independent 10V 17Ω 370mW 3uA@8V 600Ω 9.5V~10.5V SOD-123 Zener Diodes ROHSDiodes IncorporatedZener DiodesMURS360T3G
SMC-65℃~+175℃ 1.28V@4A 100A 10uA@600V 4A 600V 75ns SMC Fast Recovery / High Efficiency Diodes ROHSonsemiFast Recovery / High Efficiency DiodesNSM2011-50B5R-DSWR
SOIC-16SOIC-16 New Arrivals ROHSNOVOSENSEUncategorised
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R14, R17, R19, R20, R21, R22, R23, R24, R29, R30 |
| 12 | 56p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C7, C8, C9, C10, C11, C12, C13, C14, C33, C37 |
| 10 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 |
| 8 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C29, C30, C31, C34, C35, C36 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R15, R25, R26, R27, R31 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R32, R33 |
| 4 | 3.9 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R3, R4, R5, R6 |
| 4 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R16, R18 |
| 3 | ADM3485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | D14, D18, D19 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 1.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 220p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | ADUM4135 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D1, D2 |
| 2 | FLT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9, D11 |
| 2 | MMSZ5240B | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | MURS360T3G | Diode_SMD:D_SMC | D5, D7 |
| 2 | RDY | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10, D12 |
| 2 | WRA1215S-3WR2 | Mornsun:WRA1215S-3WR2 | D15, D16 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C32 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28 |
| 1 | 2-338069-0 | Connector_My:2-338069-0 | J1 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U6 |
| 1 | ADuM1200AR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | DC+ | Connector Power:M4 | J2 |
| 1 | DC- | Connector Power:M4 | J3 |
| 1 | GD50FFY120C5S | IGBT_Modul:GD50FFY120C5S | D20 |
| 1 | LM1117GS-3.3 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | LMV331 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | NSM2011-50B5R-DSWR | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D17 |
| 1 | OUT1 | Connector Power:M5 | J4 |
| 1 | OUT2 | Connector Power:M5 | J5 |
| 1 | R-783.3-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | R-785.0-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
| 1 | SN74AC08DR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | D13 |
Similar boards
- 6 layers189.7 × 92 mm

- 4 layers169.2 × 116 mm

- 2 layers60.6 × 108 mm

- 4 layers142.2 × 68.6 mm

- 2 layers

- 4 layers233.4 × 147.3 mm

OpenPLC Hardware
gasiepgodoy/Open-Source-PLC
Open Source Programmable Logic Controller (Hardware and Software). Based on the Master of Science in Electrical Engineering of João Vitor Rocha Santana
494 parts2 - 2 layers89.7 × 36.8 mm

- 4 layers112.7 × 67.8 mm

Questions
How big is the Driver Inductor PCB?
It measures 120.5 × 72.9 mm and has 6 copper layers, 2 mm thick.
What parts does the Driver Inductor use?
99 parts, built around the R-783.3-1.0, R-785.0-1.0, ADM3485EARZ and WRA1215S-3WR2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver Inductor KiCad files?
From the Alexandr-Filatov/Inductor-80kWt repository on GitHub, at the commit this page was made from: the board is Driver_Inductor.kicad_pcb and its schematic Current_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver Inductor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.