6 layers120.5 × 72.9 mm
4 layers142.2 × 68.6 mm
Драйвер IGBT
Alexandr-Filatov/Inductor- Size
- 142.2 × 68.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 44
- Pads
- 204
- Tracks, vias
- 207, 33
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Feb 2023
- Updated
- 17 Feb 2023
Overview
Драйвер IGBT is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/Inductor repository on GitHub. It is a 4-layer board of 142.2 × 68.6 mm with 61 parts on 44 nets, routed with 207 tracks and 33 vias.
It is built around the HGTG20N60A4, TMA 1515S and LMV324, with the LM1117GS-3.3, LM1117GS-5.0 and MURS360T3G among its other parts. Its parts include 22 resistors, 18 capacitors, 6 diodes, 5 connectors and 3 ICs.
Main components
7
HGTG20N60A4
TO-247-3-55℃~+150℃ 1.8V 105uJ 142nC@15V 150uJ 15ns 280A 290W 40A 5.5V 600V 73ns TO-247-3 IGBT Transistors / Modules ROHSonsemiIGBT Transistors / ModulesTMA 1515S
--40°C ~ 85°C (derating) 0.77" long x 0.24" wide x 0.40" high (19.5mm x 6.1mm x 10.2mm) 1 1 W 1 kV 13.5V 15V 16.5V 6-SIP Module, 4 Leads 67mA 79% ITE (Commercial) Isolation module SCP Through hole - Power Module/Power Supply ROHSTRACO POWERPower Supply Module,Power Supplies
LMV324
SOP-14-40℃~+85℃ 1MHz 2.8dB 250nA 3V~5.5V 4 400V/ms 40mA 40uV/√Hz@1kHz 430uA 5nA 7mV Built-in compensation、ESD protection SOP-14 Operational Amplifier ROHSIDCHIPOperational Amplifier
LM1117GS-3.3
SOT-223-3L-40℃~+125℃@(Tj) 1 1.2V@(1A) 100uV 12V 1A 3.3V 5mA 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHTCVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM1117GS-5.0
SOT-223-3L-40℃~+125℃@(Tj) 1 1.3V@(1A) 100uV 15V 1A 5V 5uA 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHTC Korea TAEJIN TechVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MURS360T3G
SMC-65℃~+175℃ 1.28V@4A 100A 10uA@600V 4A 600V 75ns SMC Fast Recovery / High Efficiency Diodes ROHSonsemiFast Recovery / High Efficiency DiodesVS-60EPF06-M3
TO-247ACSwitching DiodesVishay Intertechnology
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4, H5, H6 |
| 5 | 110 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R17, R18, R19, R22 |
| 4 | 0.22u | Capacitor_SMD:C_2220_5650Metric_Pad1.97x5.40mm_HandSolder | C4, C5, C8, C11 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12, C13, C17, C18 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C16 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C15 |
| 2 | 3.9 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5, R6 |
| 2 | 4.7u | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C2, C6 |
| 1 | 0 | Diode_SMD:D_SOD-123 | R8 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 13k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 15 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 220p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9 |
| 1 | 2u | Capacitor_THT:C_Rect_L31.5mm_W13.0mm_P27.50mm_MKS4 | C1 |
| 1 | 300k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 360 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 3к | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 6.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | BZT52C10-7-F | Diode_SMD:D_SOD-123 | D4 |
| 1 | Control Connector | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J3 |
| 1 | DC+ | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J1 |
| 1 | DC- | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J2 |
| 1 | HGTG20N60A4 | Package_TO_SOT_THT:TO-247-3_Vertical | Q1 |
| 1 | ISO54-Driver | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D2 |
| 1 | Jumper | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | LM1117GS-3.3 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | LM1117GS-5.0 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | LMV324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | MURS360T3G | Diode_SMD:D_SMC | D5 |
| 1 | NSM2011 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D3 |
| 1 | OUT+ | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J5 |
| 1 | OUT- | Connector_Molex:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J4 |
| 1 | TMA1515S | TRACO:TMA1515S | D8 |
| 1 | VS-60EPF06-M3 | Package_TO_SOT_THT:TO-247-2_Vertical | D1 |
Similar boards
- 6 layers189.7 × 92 mm
- 2 layers82.8 × 63 mm
- 2 layers98.6 × 53.8 mm
Piaa
soypat/piaa
Industrial extension board for Raspberry Pi Pico (W). RS485, EMI insulated digital input/output pins.
104 parts2GPL-2.0 - 4 layers66.5 × 52.3 mm
- 2 layers100 × 70 mm
Hv pulse generator
wenzel-lab/high-voltage-pulse-generator
Custom electronics solution for microfluidic droplet sorting pulses
90 parts3 - 4 layers66.5 × 70 mm
MarineBoard
Cadburies/SisuAssistant
Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.
147 parts1Apache-2.0 - 4 layers144 × 150 mm
Questions
How big is the Драйвер IGBT PCB?
It measures 142.2 × 68.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Драйвер IGBT use?
61 parts, built around the HGTG20N60A4, TMA 1515S, LMV324 and LM1117GS-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Драйвер IGBT KiCad files?
From the Alexandr-Filatov/Inductor repository on GitHub, at the commit this page was made from: the board is Драйвер IGBT/Драйвер IGBT.kicad_pcb and its schematic Драйвер IGBT/Драйвер IGBT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Драйвер IGBT design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.