2 layers82.8 × 63 mm
4 layers66.5 × 52.3 mm
Driver Board
Alexandr-Filatov/Hydrogen-PCB-DriverBoard- Size
- 66.5 × 52.3 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 33
- Nets
- 23
- Pads
- 96
- Tracks, vias
- 116, 22
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 May 2022
- Updated
- 22 Aug 2022
Overview
Driver Board is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/Hydrogen-PCB-DriverBoard repository on GitHub. It is a 4-layer board of 66.5 × 52.3 mm with 33 parts on 23 nets, routed with 116 tracks and 22 vias.
It is built around the TEC 2-1213WI and MURS360T3G. Its parts include 14 resistors, 7 capacitors, 6 diodes, 3 connectors and 1 IC.
Main components
2Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 3.9 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6, R7, R8, R9 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C5 |
| 2 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | BZT52C10-7-F | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7, D8 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H3 |
| 1 | 1.6k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C6 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 220p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 380 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 500 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 56p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | ADUM4135 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D1 |
| 1 | Conn_01x01 | Connector Power:Wire | J4 |
| 1 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07-1MP_P2.54mm_Latch_Vertical | J1 |
| 1 | IGBT_Diode | IGBT_Modul:IGBT_Gate | J3 |
| 1 | MURS360T3G | Diode_SMD:D_SMA_Handsoldering | D6 |
| 1 | TEC2-1213WI | Converter_DCDC:Converter_DCDC_TRACO_TMR-xxxx_THT | U1 |
Similar boards
- 2 layers98.6 × 53.8 mm
Piaa
soypat/piaa
Industrial extension board for Raspberry Pi Pico (W). RS485, EMI insulated digital input/output pins.
104 parts2GPL-2.0 - 4 layers142.2 × 68.6 mm
- 6 layers120.5 × 72.9 mm
- 6 layers189.7 × 92 mm
- 2 layers100 × 70 mm
Hv pulse generator
wenzel-lab/high-voltage-pulse-generator
Custom electronics solution for microfluidic droplet sorting pulses
90 parts3 - 4 layers66.5 × 70 mm
MarineBoard
Cadburies/SisuAssistant
Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.
147 parts1Apache-2.0 - 4 layers100 × 75 mm
Questions
How big is the Driver Board PCB?
It measures 66.5 × 52.3 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Driver Board use?
33 parts, built around the TEC 2-1213WI and MURS360T3G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver Board KiCad files?
From the Alexandr-Filatov/Hydrogen-PCB-DriverBoard repository on GitHub, at the commit this page was made from: the board is Driver_Board.kicad_pcb and its schematic Driver_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.