
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console

電流センサを搭載したボルボシンロボット用PCB
VolvocineWithCurrentSensorV4 is an open-source printed circuit board by KuraLab, from the KuraLab/VolvocineWithCurrentSensorV4 repository on GitHub. It is a 2-layer board of 29 × 32.3 mm with 30 parts on 32 nets, routed with 258 tracks and 8 vias.
It is built around the PAM2401SCADJ. Its parts include 7 resistors, 5 connectors, 3 ICs, 2 diodes and 1 capacitor. It belongs with the PIC boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R11, R12 |
| 2 | 47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | filter1, filter3 |
| 2 | Conn_01x12_Socket | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2, J6 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | filter2 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cout2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cin1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 2.2uH | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | Cout1 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 3.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RFB1 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RFB2 |
| 1 | 50m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rshunt1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-128 | D2 |
| 1 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | PAM2401SCADJ | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | PIC10F322-IOT | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | Sensors | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Si2315 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | + - |

jackw01/pi-tin
Open source raspberry pi handheld retro gaming console

SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…





google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

It measures 29 × 32.3 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the PAM2401SCADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KuraLab/VolvocineWithCurrentSensorV4 repository on GitHub, at the commit this page was made from: the board is VolvocineWithCurrentSensorV4.kicad_pcb and its schematic VolvocineWithCurrentSensorV4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KuraLab before reusing the design.