
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

FPGA X68k ProCaseLED is an open-source printed circuit board by kunichiko, from the kunichiko/FPGA-X68k-ProCaseLEDBoard repository on GitHub. It is a 2-layer board of 115 × 35 mm with 109 parts on 77 nets, routed with 888 tracks and 97 vias.
It is built around the JUMPER3. Its parts include 39 resistors, 18 ICs, 7 diodes, 2 capacitors and 2 connectors. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R10, R11, R12, R17, R18, R19, R20, R25, R26, R27, R28, R33, R34 +6 |
| 16 | 510 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R14, R15, R16, R21, R22, R23, R24, R29, R30, R31, R32, R37, R38, R39, R40 |
| 16 | TPR-105 | local:TPR-105 | U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16, U17, U18 |
| 10 | JUMPER3 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | C_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 1 | +3.3V | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP24 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | Conn_01x04_Male | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J2 |
| 1 | Conn_01x05_Male | Connector_JST:JST_EH_S5B-EH_1x05_P2.50mm_Horizontal | J1 |
| 1 | FDD0 ACCESS (B) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP13 |
| 1 | FDD0 ACCESS (G) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP12 |
| 1 | FDD0 ACCESS (R) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP11 |
| 1 | FDD0 ACCESS LED | local:Full-color LED LTSN-B32JEGBB-LY | LED4 |
| 1 | FDD0 EJECT (B) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP16 |
| 1 | FDD0 EJECT (G) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP15 |
| 1 | FDD0 EJECT (R) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP14 |
| 1 | FDD0 EJECT LED | local:Full-color LED LTSN-B32JEGBB-LY | LED5 |
| 1 | FDD1 ACCESS (B) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP19 |
| 1 | FDD1 ACCESS (G) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP18 |
| 1 | FDD1 ACCESS (R) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP17 |
| 1 | FDD1 ACCESS LED | local:Full-color LED LTSN-B32JEGBB-LY | LED6 |
| 1 | FDD1 EJECT (B) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP22 |
| 1 | FDD1 EJECT (G) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP21 |
| 1 | FDD1 EJECT (R) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP20 |
| 1 | FDD1 EJECT LED | local:Full-color LED LTSN-B32JEGBB-LY | LED7 |
| 1 | GND | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP23 |
| 1 | HD BUSY (B) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
| 1 | HD BUSY (G) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6 |
| 1 | HD BUSY (R) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5 |
| 1 | HD BUSY LED | local:Full-color LED LTSN-B32JEGBB-LY | LED2 |
| 1 | LED3(RESERVE) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | MCP23017_SP | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | POWER (B) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | POWER (G) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | POWER (R) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | POWER LED | local:Full-color LED LTSN-B32JEGBB-LY | LED1 |
| 1 | RESET | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP25 |
| 1 | SCL | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP26 |
| 1 | SDA | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP27 |
| 1 | TIMER (B) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP10 |
| 1 | TIMER (G) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP9 |
| 1 | TIMER (R) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP8 |
| 1 | TIMER LED | local:Full-color LED LTSN-B32JEGBB-LY | LED3 |
| 1 | TLC59116IPWR | digikey-footprints:TSSOP-28_W4.40mm | U1 |

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system






whitebox-labs/tentacle
An arduino shield to host and individually isolate up to 4 Atlas Scientific sensor circuits. Measure pH, conductivity, dissolved oxygen, ORP, temperature
It measures 115 × 35 mm and has 2 copper layers, 1.6 mm thick.
109 parts, built around the JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kunichiko/FPGA-X68k-ProCaseLEDBoard repository on GitHub, at the commit this page was made from: the board is FPGA-X68k-ProCaseLED.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kunichiko before reusing the design.