Skip to the content
2 layers20.4 × 29.4 mmSugarkey, the printed circuit board in 3D

A small USB-C FIDO security key powered by RP2350 and Pico Keys.

Size
20.4 × 29.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
59
Pads
180
Tracks, vias
288, 29
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Oct 2025
Updated
25 Oct 2025

Overview

Sugarkey is an open-source printed circuit board by kristoferkp, from the kristoferkp/sugarkey repository on GitHub. It is a 2-layer board of 20.4 × 29.4 mm with 39 parts on 59 nets, routed with 288 tracks and 29 vias.

It is built around the AMS1117-3.3, ABM8-272-T3 and AOTA-B201610S3R3-101-T, with the WS2812B among its other parts. Its parts include 19 capacitors, 8 resistors, 2 ICs, 2 switches and 1 diode. It belongs with the RP2350 boards of this library.

Main components

4

README

README.md

sugarkey

A FIDO2 compliant security key powered by my sugar addiction (and RP2354). Firmware is Pico Keys by Pol Henarejos.

Done in collaboration with Blueprint by Hack Club.

Features

  • Powered by RP2354 with 2 MB of on-chip flash and built in security features.
  • Open Source
  • Compact (around 3cm x 2cm)
  • Protective case

Getting started

  • Have your sugarkey with you (JLCPCB fabrication files are in the production folder)
  • Plug in your sugarkey while holding down BOOTSEL button.
  • Download the latest Pico Keys firmware for the Raspberry Pi Pico 2.
  • Copy the downloaded .uf2 file to the Picoboot storage mount.
  • Commisson your sugarkey here.
  • The LED is a WS2812 on GPIO 16.
  • Plug the key into your device, it will show up as a passkey.

Hardware

  • MCU: RP2354A
  • LED: WS2812 or similar
  • Raspberry Pi recommended LDO, inductor, crystal oscillator.

Disclaimer!

This isn't a finished product and shouldn't be trusted with super important stuff. I am in no way responsible for lost data.

Schematic

alt text

PCB

image image

Picture of the JLCPCB cart

image

Parts

39
QtyValueFootprintReferences
11100nFPCM_JLCPCB:C_0402C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C14
44.7uFPCM_JLCPCB:C_0402C13, C15, C16, C17
4LOGOLOGOG***, G***, G***, G***
31kΩPCM_JLCPCB:R_0402R6, R7, R8
210uFPCM_JLCPCB:C_0402C1, C2
215pFPCM_JLCPCB:C_0402C18, C19
227ΩPCM_JLCPCB:R_0402R3, R4
25.1kΩPCM_JLCPCB:R_0402R1, R2
2SW_PushPCM_JLCPCB:SW_TS-1088-AR02016SW1, SW2
133ΩPCM_JLCPCB:R_0402R5
1ABM8-272-T3PCM_JLCPCB:CRYSTAL-SMD_4P-L3.2-W2.5-BLX1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1AOTA-B201610S3R3-101-TSamacSys_Parts:AOTAB201610S3R3101TL1
1RP2354A-QFN60RP2350_KiCad-main:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mmU1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1WS2812BPCM_JLCPCB:LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812BD1

Similar boards

  • 2 layers99.6 × 49.8 mmStasis badge, the printed circuit board in 3D

    Stasis badge

    MeghanaM4/stasis-badge

    74 parts2
  • 2 layers70 × 99 mmCampfire console, the printed circuit board in 3D

    Campfire console

    MeghanaM4/campfire-console

    PCB Badges with TFT display, NFC module, lipo battery charging, and 6 programmable buttons

    71 parts1MIT
  • 4 layers44.3 × 95.9 mmAura mon, the printed circuit board in 3D

    Aura mon

    nrwiersma/aura-mon

    RP-2350 Energy Data Logger

    119 parts1
  • 4 layers72.5 × 39.7 mmFOC RP2350, the printed circuit board in 3D

    FOC RP2350

    totaldesaster/SimpleFOC-Serial-Driver

    Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.

    68 parts1GPL-3.0
  • 4 layers68.6 × 56 mmCartridge, the printed circuit board in 3D

    Cartridge

    coco-chameleon/chameleon-hardware

    TRS-80 Color Computer cartridge emulator

    95 partsCERN-OHL-W-2.0
  • 4 layers34 × 87.3 mmMini DSP, the printed circuit board in 3D

    Mini DSP

    kingovchouffe/Mini-DSP

    95 parts
  • 4 layers68 × 75 mmDeltaRhoRobot, the printed circuit board in 3D

    DeltaRhoRobot

    valleyquail/DeltaRhoPCB

    PCB files for the robot

    119 parts1
  • 4 layers91 × 91 mmKeymodule revides, the printed circuit board in 3D

    Keymodule revides

    Mosselman/PixelPanel

    Keymodule & pcb design

    123 partsMIT

Questions

How big is the Sugarkey PCB?

It measures 20.4 × 29.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sugarkey use?

39 parts, built around the AMS1117-3.3, ABM8-272-T3, AOTA-B201610S3R3-101-T and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sugarkey KiCad files?

From the kristoferkp/sugarkey repository on GitHub, at the commit this page was made from: the board is PCB/sugarkey.kicad_pcb and its schematic PCB/sugarkey.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sugarkey design in my own project?

Its repository states no licence, so its author keeps all rights: ask kristoferkp before reusing the design.