Skip to the content
2 layers100 × 100 mmLT Eval board, the printed circuit board in 3D

Evaluation board for Lichee Tang

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
98
Nets
219
Pads
481
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
16 Jun 2019
Updated
11 Jul 2019

Overview

LT Eval board is an open-source printed circuit board by kprasadvnsi, from the kprasadvnsi/LT_Eval_board repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 100 × 100 mm with 98 parts on 219 nets.

It is built around the CS4344, BAT54S and PJ-307. Its parts include 63 resistors, 13 capacitors, 7 connectors, 4 diodes and 3 ICs. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.

Main components

3

README

README.md

This project is work in progress.

Join our Telegram group for more information and discussions.

Parts

98
QtyValueFootprintReferences
22510Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R4, R13, R14, R15, R16, R17, R18, R26, R27, R28, R29, R30, R31 +6
18255Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR7, R10, R11, R12, R19, R20, R21, R22, R23, R24, R33, R34, R35, R36, R37, R38 +2
8270Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR44, R45, R46, R47, R48, R49, R50, R51
575Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR39, R40, R41, R42, R43
40.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C3, C10
4BAT54SPackage_TO_SOT_SMD:SOT-23D1, D2, D3, D4
3470Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR53, R58, R59
210KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR56, R57
210nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6, C8
22KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR54, R55
23.3uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC4, C13
24.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC9, C12
2Conn_01x40_MaleConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ1, J2
2Jumper_DualJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP1, JP2
2Mini-DIN-6lt_eval_board:Mini_din6J6, J7
2VAL**lt_eval_board:mouse-bite-3mm-slotmouse-bite-3mm-slot, mouse-bite-3mm-slot
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC5
110uHInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1
11KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR52
11uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC7
13.3ufCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC11
14.7KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR25
1560Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR32
1ADV7123Package_QFP:LQFP-48_7x7mm_P0.5mmU2
1CS4344Package_SO:TSSOP-10_3x3mm_P0.5mmU3
1DB15_Male_HighDensityConnector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mmJ3
1HDMI_Alt_eval_board:HDMI_A_Female_2000-1-2-41-00-BKJ4
1LicheeTanglt_eval_board:Lichee_TangU1
1PJ-307lt_eval_board:PJ-307J5

The 95 most common of 98 parts.

Similar boards

  • 2 layers42.2 × 68.1 mmRT4K donut dongle, the printed circuit board in 3D

    RT4K donut dongle

    svirant/DonutDongle

    Arduino Nano based hub that connects your digital and analog console switching setup with the RetroTink 4K and/or RetroTink 5x/OSSC for Auto Profile switching

    49 parts17GPL-3.0
  • 4 layers100 × 64.8 mmMSX OPL4 Wozblaster, the printed circuit board in 3D

    MSX OPL4 Wozblaster

    cristianoag/wozblaster

    Repository to host source files for the Wozblaster Reloaded

    64 parts10
  • 2 layers100 × 100 mmAbx, the printed circuit board in 3D

    Abx

    cellularmitosis/abx-tayda

    A relay board for performing blind A/B testing of two audio sources.

    85 parts2MIT
  • 2 layers93.5 × 36 mmInput hub, the printed circuit board in 3D

    Input hub

    Mazzorella/ClickTapToe

    Accessible mouse implemented with ZMK.

    35 parts
  • 2 layers100 × 22.5 mmBulkyMIDI-32 Internal Panel, the printed circuit board in 3D

    BulkyMIDI-32 Internal Panel

    tebl/BulkyMIDI-32

    A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.

    19 parts80CC-BY-SA-4.0
  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 4 layers101.8 × 83 mmSd2snes ecp5, the printed circuit board in 3D

    Sd2snes ecp5

    samlittlewood/sd2snes_ecp5

    Lattice ECP5 variant of SD2SNES

    184 parts21GPL-2.0
  • 2 layers75.5 × 62.5 mmHeadphone dac, the printed circuit board in 3D

    Headphone dac

    fsodari/ProtoDAC

    USB Audio DAC

    69 parts10AGPL-3.0

Questions

How big is the LT Eval board PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LT Eval board use?

98 parts, built around the CS4344, BAT54S and PJ-307. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LT Eval board KiCad files?

From the kprasadvnsi/LT_Eval_board repository on GitHub, at the commit this page was made from: the board is LT_Eval_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LT Eval board design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).