Skip to the content
12345

PJ-307

HOOYAExtended

3.5mm Headphone Jack Silver 插件 Audio Connectors ROHS

Part id
hooya/PJ-307
Category
Audio Connectors (Headphones)
Package
插件
Pins
5
In stock
190 at JLCPCB (C2939173)
Used on
8 open-source boards

Overview

The PJ-307 is an audio Connector made by HOOYA in a 插件 package with 5 pins. 3.5mm Headphone Jack Silver 插件 Audio Connectors ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PJ-307_C2939173, from EasyEDA) and its footprint (EasyEDA_Cloud:AUDIO-TH_PJ-307, from EasyEDA), ready for a KiCad board. 190 are in stock at JLCPCB (part C2939173). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

13245
EasyEDA_Cloud:PJ-307_C2939173From EasyEDA

Footprint

12345
EasyEDA_Cloud:AUDIO-TH_PJ-307From EasyEDA

Pinout

5
The pins of the PJ-307
PinNameType
11Unspecified
22Unspecified
33Unspecified
44Unspecified
55Unspecified

Open-source boards using it

8
  • 2 layers42.2 × 68.1 mmRT4K donut dongle, the printed circuit board in 3D

    RT4K donut dongle

    svirant/DonutDongle

    Arduino Nano based hub that connects your digital and analog console switching setup with the RetroTink 4K and/or RetroTink 5x/OSSC for Auto Profile switching

    49 parts17GPL-3.0
  • 4 layers100 × 64.8 mmMSX OPL4 Wozblaster, the printed circuit board in 3D

    MSX OPL4 Wozblaster

    cristianoag/wozblaster

    Repository to host source files for the Wozblaster Reloaded

    64 parts10
  • 2 layers100 × 100 mmAbx, the printed circuit board in 3D

    Abx

    cellularmitosis/abx-tayda

    A relay board for performing blind A/B testing of two audio sources.

    85 parts2MIT
  • 2 layers100 × 100 mmLT Eval board, the printed circuit board in 3D

    LT Eval board

    kprasadvnsi/LT_Eval_board

    Evaluation board for Lichee Tang

    98 partsCC-BY-SA-4.0
  • 2 layers93.5 × 36 mmInput hub, the printed circuit board in 3D

    Input hub

    Mazzorella/ClickTapToe

    Accessible mouse implemented with ZMK.

    35 parts
  • 2 layers100 × 22.5 mmBulkyMIDI-32 Internal Panel, the printed circuit board in 3D

    BulkyMIDI-32 Internal Panel

    tebl/BulkyMIDI-32

    A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.

    19 parts80CC-BY-SA-4.0
  • 2 layers100 × 64.8 mmMSX OPL4 Wozblaster, the printed circuit board in 3D

    MSX OPL4 Wozblaster

    cristianoag/wozblaster

    Repository to host source files for the Wozblaster Reloaded

    50 parts10
  • 4 layers100 × 64.8 mmMSX OPL4 Wozblaster, the printed circuit board in 3D

    MSX OPL4 Wozblaster

    cristianoag/wozblaster

    Repository to host source files for the Wozblaster Reloaded

    56 parts10

Questions

Is there a KiCad symbol and footprint for the PJ-307?

Yes. The symbol is EasyEDA_Cloud:PJ-307_C2939173 and the footprint EasyEDA_Cloud:AUDIO-TH_PJ-307, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PJ-307?

插件, with 5 pins. Its footprint is drawn on this page.

Where is the PJ-307 datasheet?

HOOYA publishes it: the Datasheet link on this page opens it.

Where can I order the PJ-307?

JLCPCB lists it as part C2939173, with 190 in stock; the sellers' links on this page open their listings.

Which open-source boards use the PJ-307?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.