Skip to the content

CS4344

Cirrus LogicExtended

- New Arrivals ROHS

Part id
cirrus-logic/CS4344
Category
Uncategorised
Package
TSSOP-10
Pins
10
In stock
0 at JLCPCB (C2914311)
Used on
15 open-source boards

Overview

The CS4344 is an uncategorised made by Cirrus Logic in a TSSOP-10 package with 10 pins. - New Arrivals ROHS.

PCBKit's library has its KiCad symbol (Audio:CS4344, from KiCad's library) and its footprint (Package_SO:TSSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2914311). 15 open-source boards in 13 repositories on GitHub use it.

Symbol

1SDIN2DEM/SCLK3LRCK4MCLK5VQ6FILT+7AOUTL8GND9VA10AOUTR
Audio:CS4344From KiCad's library

Footprint

Package_SO:TSSOP-10_3x3mm_P0.5mmFrom KiCad's library

Pinout

10
The pins of the CS4344
PinNameType
1SDINInput
2DEM/SCLKInput
3LRCKInput
4MCLKInput
5VQOutput
6FILT+Output
7AOUTLOutput
8GNDPower in
9VAPower in
10AOUTROutput

Open-source boards using it

15See all 15
  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 4 layers101.8 × 83 mmSd2snes ecp5, the printed circuit board in 3D

    Sd2snes ecp5

    samlittlewood/sd2snes_ecp5

    Lattice ECP5 variant of SD2SNES

    184 parts21GPL-2.0
  • 2 layers75.5 × 62.5 mmHeadphone dac, the printed circuit board in 3D

    Headphone dac

    fsodari/ProtoDAC

    USB Audio DAC

    69 parts10AGPL-3.0
  • 4 layers250 × 100 mmFreEDrum, the printed circuit board in 3D

    FreEDrum

    Gemuesesaft/freEDrum

    Open source EDrum trigger module

    492 parts1GPL-3.0
  • 4 layers62.1 × 67.3 mmProto pico, the printed circuit board in 3D

    Proto pico

    amundgr/proto_pico

    A mash of several different projects in one PCB in an attempt to kicak start all of them at once. Why fail and give up on one project when you can do it on several at once!

    112 parts
  • 2 layers100 × 100 mmLT Eval board, the printed circuit board in 3D

    LT Eval board

    kprasadvnsi/LT_Eval_board

    Evaluation board for Lichee Tang

    98 partsCC-BY-SA-4.0
  • 2 layers51 × 30 mmEsp32audio, the printed circuit board in 3D

    Esp32audio

    ppisljar/freeesp32_audioplayer

    ESP32 Audio Player main board (KiCad, XIAO ESP32-S3)

    45 parts
  • 2 layers18.5 × 25 mmCS4344, the printed circuit board in 3D

    CS4344

    sneakylizard123-4/CS4344

    The CS4344 is a 24-bit stereo DAC that accepts I2S audio and runs from a single 3.3 V supply. This board gives it a 6-pin 2.54 mm header, a 3.5 mm stereo jack, and the passives it needs. There is no configuration bus.

    14 partsCERN-OHL-P-2.0

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the CS4344?

Yes. The symbol is Audio:CS4344 and the footprint Package_SO:TSSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CS4344?

TSSOP-10, with 10 pins. Its footprint is drawn on this page.

Where can I order the CS4344?

JLCPCB lists it as part C2914311, with 0 in stock; the sellers' links on this page open their listings.

What can replace the CS4344?

Parts like it in the library: the ADS1113IDGST by Texas Instruments, the PCA9615DP by NXP Semiconductors, the ADS1013IDGST by Texas Instruments and the INA229 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CS4344?

15 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.