4 layers75 × 65 mm
CRImier MyKiCad vaio re
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
289 parts1
4 layers62.1 × 67.3 mm
Proto pico
amundgr/proto_picoA mash of several different projects in one PCB in an attempt to kicak start all of them at once. Why fail and give up on one project when you can do it on several at once!
- Size
- 62.1 × 67.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 129
- Pads
- 463
- Tracks, vias
- 853, 96
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 May 2023
- Updated
- 16 Aug 2023
Overview
Proto pico is an open-source printed circuit board by amundgr, from the amundgr/proto_pico repository on GitHub. It is a 4-layer board of 62.1 × 67.3 mm with 112 parts on 129 nets, routed with 853 tracks and 96 vias.
It is built around the RP2040, 74LVC1G17Z and DRV8835DSS, with the AP2112K-3.3 and CS4344 among its other parts. Its parts include 37 capacitors, 36 resistors, 17 connectors, 10 ICs and 8 diodes. It belongs with the RP2040 boards of this library.
Main components
5
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
74LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
DRV8835DSS
WSON-12-EP(2x3)-40℃~+150℃ 1.5A 2 2V~7V 305mΩ 95nA Yes WSON-12-EP(2x3) Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor Driver
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
CS4344
TSSOP-10- New Arrivals ROHSCirrus LogicUncategorised
README
README.mdproto_pico
A mash of several different projects in one PCB in an attempt to kickstart all of them at once. Why fail and give up on one project when you can do it on several at once!
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1u | Capasitors:C_0603_1608Metric | C1, C2, C5, C6, C9, C22, C30, C31, C32, C33, C34 |
| 9 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R4, R6, R7, R8, R9, R10, R11, R36 |
| 9 | 100n | Capasitors:C_0603_1608Metric | C10, C11, C12, C14, C17, C18, C35, C36, C37 |
| 9 | 470 | Resistor_SMD:R_0603_1608Metric | R23, R25, R26, R30, R31, R32, R33, R34, R35 |
| 8 | ~ | LEDs:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | ~ | Connectors:PinHeader_1x03_P2.54mm_Vertical | J10, J12, J13, J14, J18 |
| 4 | 0.1u | Capasitors:C_0603_1608Metric | C7, C8, C21, C27 |
| 4 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2, R28, R29 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R12, R21, R27 |
| 3 | 2u2 | Capasitors:C_0603_1608Metric | C13, C15, C16 |
| 3 | Screw_Terminal_01x02 | Connectors:2x1_screw_terminal | J2, J3, J4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R22, R24 |
| 2 | 10u | Capasitors:C_0805_2012Metric | C25, C26 |
| 2 | 15p | Capasitors:C_0603_1608Metric | C19, C20 |
| 2 | 18p | Capasitors:C_0603_1608Metric | C3, C4 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 2 | 3.3u | Capasitors:C_0805_2012Metric | C23, C24 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R15, R16 |
| 2 | ? | Capasitors:C_0805_2012Metric | C28, C38 |
| 2 | Header_2.54mm_1x5 | Connectors:PinHeader_1x05_P2.54mm_Vertical | J8, J11 |
| 2 | PTS647 | Switches:PTS647 | SW1, SW2 |
| 2 | ~ | Connectors:PinHeader_1x04_P2.54mm_Vertical | J7, J9 |
| 2 | ~ | Connectors:PinHeader_1x02_P2.54mm_Vertical | J5, J17 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 24k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 74LVC1G17 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | AP2112K-3.3 | Regulators:SOT-23-5 | U3 |
| 1 | CP2615 | USB:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm | U1 |
| 1 | CS4344 | DAC:MSOP-10_3x3mm_P0.5mm | U8 |
| 1 | Crystal_12MHz | Oscillators:ECX-32 | Y2 |
| 1 | Crystal_24MHz | Oscillators:Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm | Y1 |
| 1 | DRV8835 | Motor_Drivers:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65 | U7 |
| 1 | Header_2.54mm_1x7 | Connectors:PinHeader_1x07_P2.54mm_Vertical | J6 |
| 1 | LM4040DBZ-3 | Regulators:SOT-23-3 | U6 |
| 1 | RP2040 | Microcontrollers:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | USB 2.0 Hub | USB:QFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | USB-C Receptacle | Connectors:USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
| 1 | W25Q16JV | Memory:SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | ~ | Connectors:FFC_20_Pin | J15 |
| 1 | ~ | Regulators:SOT-23-5 | U9 |
Similar boards
- 2 layers60 × 22.9 mm
ElectronutLabs ZeroDriver autosave zeroDriver
PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…
53 parts21MIT - 2 layers101.5 × 83 mm
- 4 layers101.8 × 83 mm
- 2 layers75.5 × 62.5 mm
- 4 layers250 × 100 mm
- 2 layers100 × 100 mm
- 2 layers51 × 30 mm
Esp32audio
ppisljar/freeesp32_audioplayer
ESP32 Audio Player main board (KiCad, XIAO ESP32-S3)
45 parts
Questions
How big is the Proto pico PCB?
It measures 62.1 × 67.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Proto pico use?
112 parts, built around the RP2040, 74LVC1G17Z, DRV8835DSS and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proto pico KiCad files?
From the amundgr/proto_pico repository on GitHub, at the commit this page was made from: the board is proto_pico.kicad_pcb and its schematic proto_pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proto pico design in my own project?
Its repository states no licence, so its author keeps all rights: ask amundgr before reusing the design.