kostareg/zenithZenith is a 64-bit CPU and tensor accelerator.
Zenith pcba is an open-source printed circuit board by kostareg, from the kostareg/zenith repository on GitHub. It is a 2-layer board of 194.1 × 141.7 mm with 63 parts on 480 nets, routed with 479 tracks and 87 vias.
It is built around the AP63203WU, CH347T and AS0A621-H2S6-7H, with the TXS0101DB(LX), RC0402FR-0710KL and 0402CG220J500NT among its other parts. Its parts include 23 resistors, 10 capacitors, 9 ICs, 5 diodes and 1 connector. It belongs with the FPGA and CPLD boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | RC0402FR-0710KL | easyeda2kicad:R0402 | R5, R6, R7, R8, R9, R16 |
| 6 | RC0402FR-0722R1L | easyeda2kicad:R0402 | R10, R11, R12, R13, R14, R15 |
| 6 | TXS0101DB | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.9-BL | U5, U6, U7, U8, U9, U10 |
| 4 | CL10B104KA8NNNC | easyeda2kicad:C0603 | C1, C5, C8, C9 |
| 3 | RC0402FR-071K02L | easyeda2kicad:R0402 | R18, R20, R22 |
| 3 | RC0402JR-07510RL | easyeda2kicad:R0402 | R17, R19, R21 |
| 2 | 0402CG220J500NT | easyeda2kicad:C0402 | C2, C3 |
| 2 | CC0603MRX5R7BB106 | easyeda2kicad:C0603 | C4, C10 |
| 2 | CC1206KKX7R6BB226 | easyeda2kicad:C1206 | C6, C7 |
| 2 | DS1093-01-PN60 | easyeda2kicad:CONN-TH_DS1093-01-PN60 | PS1, PS2 |
| 2 | PRTR5V0U2X_C5158049 | easyeda2kicad:SOT-143_L2.9-W1.3-P1.92-LS2.3-BL | D2, D3 |
| 2 | RC0603FR-074K7L | easyeda2kicad:R0603 | R1, R2 |
| 2 | RC0603JR-075K1L | easyeda2kicad:R0603 | R3, R4 |
| 1 | 5025700893 | easyeda2kicad:TF-SMD_5025700893 | Card1 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | AS0A621-H2S6-7H | easyeda2kicad:CONN-SMD_204P-P0.60_AS0A621-H2S6-7H | CN1 |
| 1 | CH347T | easyeda2kicad:TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U3 |
| 1 | DS1038-15FBNSIA74-0CC | easyeda2kicad:DSUB-TH_DS1038-15FBNSIA74-0CC | DSub1 |
| 1 | G4R152312 | easyeda2kicad:SW-SMD_4P-L5.2-W5.2-P3.70-LS6.4_UK-B0233XX | SW1 |
| 1 | RC0402DR-072K05L | easyeda2kicad:R0402 | R23 |
| 1 | SWPA4030S3R3MT | easyeda2kicad:IND-SMD_L4.0-W4.0_SMNR4012 | L2 |
| 1 | SX5B8.000F1520F30 | easyeda2kicad:CYSTAL-SMD_4P-L5.0-W3.2-BL | X1 |
| 1 | TPD6E004RSER | easyeda2kicad:UQFN-8_L1.5-W1.5-P0.50-TL | D4 |
| 1 | TPESD7538P | easyeda2kicad:DFN3810-9_L3.8-W1.0-P0.9 | D5 |
| 1 | USB4105-GF-A | easyeda2kicad:TYPE-C-SMD_SBC-160S1A-20-S412 | USB1 |
| 1 | USBLC6-2SC6 | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D1 |
| 1 | XC7K70T-FBG676 | easyeda2kicad:FBGA-676_L27.0-W27.0-R26-C26-P1.00-BL | U1 |
The 56 most common of 63 parts.
It measures 194.1 × 141.7 mm and has 2 copper layers, 1.6 mm thick.
63 parts, built around the AP63203WU, CH347T, AS0A621-H2S6-7H and TXS0101DB(LX). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kostareg/zenith repository on GitHub, at the commit this page was made from: the board is zenith-pcba/zenith-pcba.kicad_pcb and its schematic zenith-pcba/disconnected_io.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kostareg before reusing the design.
redwoodsteve/zero-console
For games: - put any files you need for any games you add in here - make sure to add games to launcher/games.json ## assets Common assets (textures, sounds, etc) to use throughout ## hardware The folder where you can…
Reemuson/KNEE-CONTROLLER-PCBA
GitHub Actions generates the manufacturing, schematic, test, and release packages.
gianlucarenzi/Vera-Module-RBL-XE
[WORK IN PROGRESS - NOT WORKING] VERA video/audio module for ATARI XL/XE (PBI / cartridge, ESP32-S3 + iCE40)
noahcroit/access_control_rp2zk
Firmware for Fail-secure door controller of access control room. Activate when power outage is occured.
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
uinika/UINIO-USB-Serial
A Serial Protocol Converter base on CH347T related I2C & SPI and so on.