2 layers55.3 × 28.1 mm
UINIO USB Serial
uinika/UINIO-USB-Serial
A Serial Protocol Converter base on CH347T related I2C & SPI and so on.
33 parts2
Overview
The CH347T is a USB Converter made by WCH (Nanjing Qinheng Microelectronics) in a TSSOP-20 package with 20 pins. -40℃~+85℃ 2 3V、3.3V、3.6V 9Mbps USB 2.0 USB to UART、USB to SPI、USB to I2C、USB to JTAG TSSOP-20 USB Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:CH347T, from EasyEDA) and its footprint (Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 1,030 are in stock at JLCPCB (part C5122332). 8 open-source boards in 8 repositories on GitHub use it.
Symbol
Footprint
Parameters
8- Applications Function
- USB to SPI
- Current - Supply
- 50mA
- Data Rate
- 9Mbps
- Features
- FIFO buffer；Programmable baud rate；Built-in clock generator；Hardware flow control support；Power-on reset
- Number of Channels
- 2
- Operating Temperature
- -40℃~+85℃
- USB Protocol
- USB 2.0
- Voltage - Supply
- 3V
Order codes
1- CH347TLCSC C5122332
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | RST# | Unspecified |
| 2 | CTS1/GPIO6 | Unspecified |
| 3 | TXD1 | Unspecified |
| 4 | RXD1 | Unspecified |
| 5 | DSR0/GPIO2/SCS0/TMS | Unspecified |
| 6 | CTS0/GPIO0/SCK/TCK | Unspecified |
| 7 | RTS0/GPIO1/MISO/TDO | Unspecified |
| 8 | TXD0/MOSI/TDI | Unspecified |
| 9 | TNOW0/DTR0/GPIO5/SCS1/TRST | Unspecified |
| 10 | TNOW1/DTR1 | Unspecified |
| 11 | RI0/GPIO3/SCL | Unspecified |
| 12 | RXD0/SDA | Unspecified |
| 13 | RTS1/GPIO7 | Unspecified |
| 14 | VCC | Unspecified |
| 15 | DCD0/GPIO4/ACT | Unspecified |
| 16 | UD- | Unspecified |
| 17 | UD+ | Unspecified |
| 18 | GND | Unspecified |
| 19 | XI | Unspecified |
| 20 | XO | Unspecified |
Open-source boards using it
All 8- 4 layers57.4 × 23.9 mm
- 6 layers79.3 × 68.9 mm
- 2 layers194.1 × 141.7 mm
- 2 layers51.3 × 48.2 mm
- 2 layers75 × 50 mm
- 4 layers160 × 110 mm
DCJ11CoreBoard
CYP4502D6/DCJ11CoreBoard
PDP-11 replica project based on the DEC DCJ-11 chipset, utilizing FPGA as bus controller and peripheral emulator, using external SRAM to provide system memory
200 parts13GPL-3.0 - 2 layers35 × 16.5 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/wch/CH347T" title="CH347T in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/wch/CH347T.jpg" alt="CH347T" width="1200" height="900">[](https://pcbkit.io/parts/wch/CH347T)Questions
Is there a KiCad symbol and footprint for the CH347T?
Yes. The symbol is EasyEDA_Cloud:CH347T and the footprint Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CH347T?
TSSOP-20, with 20 pins. Its footprint is drawn on this page.
Where is the CH347T datasheet?
WCH (Nanjing Qinheng Microelectronics) publishes it: the Datasheet link on this page opens it.
Where can I order the CH347T?
JLCPCB lists it as part C5122332, with 1,030 in stock; the sellers' links on this page open their listings.
What can replace the CH347T?
Parts like it in the library: the CH552T by WCH (Nanjing Qinheng Microelectronics) and the XPD767DP45 by Shenzhen Fuman Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CH347T?
8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
