

Solar Panel MPPT Controller
- Size
- 107.5 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 21
- Pads
- 87
- Tracks, vias
- 145, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2022
- Updated
- 5 Dec 2019
Overview
Solar Panel MPPT Controller is an open-source printed circuit board by koson, from the koson/KicadProject repository on GitHub. It is a 2-layer board of 107.5 × 55 mm with 35 parts on 21 nets, routed with 145 tracks and 0 vias.
It is built around the LM2678T-ADJ, TL084 and STPS10L25D, with the TL431 among its other parts. Its parts include 17 resistors, 5 capacitors, 2 ICs, 1 diode and 1 inductor. It belongs with the power boards of this library.
Main components
4LM2678T-ADJ
TO-220-7-40℃~+125℃@(TJ) 1 1.21V~37V 260kHz 4.2mA 5A 8V~40V Adjustable Buck Built-in No Overcurrent Protection、Cycle-by-cycle current limiting Step-down type TO-220-7 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTL084
SOP-14-18V~18V 0℃~+70℃ 1.4mA 16V/us 20nA 3mV 4MHz 4nA 60mA 75dB Four channels Short-Circuit Protection、Built-in compensation SOP-14 FET Input Amplifiers ROHSGcoreOperational AmplifierSTPS10L25D
TO-220AC1 Independent 10A 200A 25V 460mV@10A 800uA@25V TO-220AC Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesTL431
SOT-23-20℃~+85℃ 150mA 1mA 2.5V~36V 50ppm/℃ Adjustable Parallel Temperature compensation control ±1% SOT-23 Voltage Reference ROHSGuangdong HottechVoltage Reference
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100kΩ | Custom Footprint:Resistor-0.25W | R10, R11, R12, R13, R14, R15, R16, R17 |
| 4 | 2.2mF | Custom Footprint:Cap_Pol_Radial_D16_P4 | C1, C2, C4, C5 |
| 3 | 10kΩ | Custom Footprint:Resistor-0.25W | R6, R8, R9 |
| 2 | 2kΩ | Custom Footprint:Potentiometer_Bourns_3386 | POT1, POT2 |
| 2 | 82kΩ | Custom Footprint:Resistor-0.25W | R1, R3 |
| 2 | 9.1kΩ | Custom Footprint:Resistor-0.25W | R4, R7 |
| 1 | 10nF | Custom Footprint:Cap_UnPol_P3 | C3 |
| 1 | 22uH | Custom Footprint:Inductor-22uH-5.4A | L1 |
| 1 | 3.3kΩ | Custom Footprint:Resistor-0.25W | R5 |
| 1 | 5.6kΩ | Custom Footprint:Resistor-0.25W | R2 |
| 1 | LM2678T-ADJ | Custom Footprint:TO-220_Neutral1234567_Vertical | U1 |
| 1 | Output | Custom Footprint:Terminal_Block-5mm | TB2 |
| 1 | Panel In | Custom Footprint:Terminal_Block-5mm | TB1 |
| 1 | STPS10L25D | Custom Footprint:TO-220_Neutral12_Vertical | D1 |
| 1 | TL084 | Custom Footprint:IC_PDIP_14pin | U2 |
| 1 | TL431 | Custom Footprint:TO-92_Inline_Wide | Vref1 |
The 31 most common of 35 parts.
More from koson/KicadProject
12- 2 layers150 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers

- 2 layers190.5 × 88.9 mm

- 2 layers75 × 50 mm

- 2 layers100 × 100 mm

- 2 layers95 × 60 mm

- 2 layers146.1 × 69.9 mm

- 2 layers112.5 × 60 mm

- 2 layers88.9 × 48.9 mm

- 2 layers62.2 × 55.9 mm

Similar boards
- 2 layers49.5 × 54 mm

WLED Controller
chipnotic/WLED-Controller
Controller PCB for WLED, dual strip output, relay power control, option button
24 parts7 - 4 layers178.9 × 131.8 mm

UVerter
owntech-foundation/micro-inverter
A repository to do collective work on an open source micro-inverter.
402 parts118CERN-OHL-S-2.0 - 4 layers202 × 125 mm

- 4 layers150 × 100 mm

- 2 layers74.9 × 20.3 mm

Rt soldering iron
kcuzner/rt-soldering-iron
Soldering iron driver board for Weller RT tips. A work in progress. Firmware in rust.
126 parts6 - 4 layers84 × 55 mm

- 2 layers110 × 100 mm

Jbc miniregler
KarlZeilhofer/htl-loetregler-mini
Einfacher Regler für JBC Lötspitzen der Serie T210, T245 und T470, Weller RT-Spitzen und TS100-Spitzen sollten auch funktionieren.
180 parts2MIT - 2 layers50 × 50 mm

Questions
How big is the Solar Panel MPPT Controller PCB?
It measures 107.5 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solar Panel MPPT Controller use?
35 parts, built around the LM2678T-ADJ, TL084, STPS10L25D and TL431. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solar Panel MPPT Controller KiCad files?
From the koson/KicadProject repository on GitHub, at the commit this page was made from: the board is Solar Panel MPPT Controller/Solar Panel MPPT Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solar Panel MPPT Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.