2 layers243.2 × 106 mm
4 layers71.5 × 46 mm
HomeMade StreamDeck
KondaxDev/HomeMade-StreamDeckjust a repo for my HomeMade StreamDeck PCB model
- Size
- 71.5 × 46 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 41
- Pads
- 136
- Tracks, vias
- 247, 47
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Aug 2026
- Updated
- 24 Aug 2026
Overview
HomeMade StreamDeck is an open-source printed circuit board by KondaxDev, from the KondaxDev/HomeMade-StreamDeck repository on GitHub. It is a 4-layer board of 71.5 × 46 mm with 26 parts on 41 nets, routed with 247 tracks and 47 vias.
It is built around the ATMEGA32U4-AU. Its parts include 10 switches, 6 capacitors, 6 resistors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
Readme.mdHardware — Bill of Materials
Custom Stream Deck PCB. 4-layer board, 77×46mm, ATmega32U4 + USB-C + I2C OLED + 3×3 button grid.
Active Components
| Ref | Component | Value / Spec | Footprint | Qty |
|---|---|---|---|---|
| U1 | Microcontroller ATmega32U4 | TQFP-44, native USB | Package_QFP:TQFP-44_10x10mm_P0.8mm | 1 |
| U2 | OLED Display, I2C | 0.91", SSD1306 | Display:ER_OLEDM0.91_1x-I2C | 1 |
| Y1 | Crystal | 16 MHz | Crystal:Crystal_SMD_HC49-SD | 1 |
| J2 | USB-C Connector | Receptacle 14P/16P | Connector_USB:USB_C_Receptacle... | 1 |
Resistors (0805)
| Ref | Role | Value | Footprint | Qty |
|---|---|---|---|---|
| R1 | D- series | 22 Ω | Resistor_SMD:R_0805_2012Metric | 1 |
| R2 | D+ series | 22 Ω | Resistor_SMD:R_0805_2012Metric | 1 |
| R3 | CC1 | 5.1 kΩ | Resistor_SMD:R_0805_2012Metric | 1 |
| R4 | CC2 | 5.1 kΩ | Resistor_SMD:R_0805_2012Metric | 1 |
| R5 | D+ pull-up | 1.5 kΩ | Resistor_SMD:R_0805_2012Metric | 1 |
| R6 | RESET pull-up | 10 kΩ | Resistor_SMD:R_0805_2012Metric | 1 |
Capacitors (0805)
| Ref | Role | Value | Footprint | Qty |
|---|---|---|---|---|
| C1 | Crystal XTAL1 | 22 pF | Capacitor_SMD:C_0805_2012Metric | 1 |
| C2 | Crystal XTAL2 | 22 pF | Capacitor_SMD:C_0805_2012Metric | 1 |
| C3 | UCAP | 1 µF | Capacitor_SMD:C_0805_2012Metric | 1 |
| C4 | VCC decoupling | 100 nF | Capacitor_SMD:C_0805_2012Metric | 1 |
| C5 | UVCC decoupling | 100 nF | Capacitor_SMD:C_0805_2012Metric | 1 |
| C6 | AVCC decoupling | 100 nF | Capacitor_SMD:C_0805_2012Metric | 1 |
Buttons
| Ref | Component | Spec | Footprint | Qty |
|---|---|---|---|---|
| SW1–SW9 | Push buttons (3×3 grid) | 6×6mm THT, 4-pin | Button_Switch_THT:SW_PUSH_6mm | 9 |
| SW10 | Reset button | 6×6mm THT, 4-pin | Button_Switch_THT:SW_PUSH_6mm | 1 |
Misc
| Item | Spec | Qty |
|---|---|---|
| PCB (4-layer, JLCPCB) | 77×46mm, batch of 5 | 1 batch |
| Button cap | — | 1 (adjust as needed) |
Unique Part Count
- 1× ATmega32U4 (U1)
- 1× SSD1306 OLED display (U2)
- 1× 16MHz crystal (Y1)
- 1× USB-C connector (J2)
- 6× 0805 resistors (R1–R6, various values)
- 6× 0805 capacitors (C1–C6, various values)
- 10× 6×6mm THT push buttons (SW1–SW10)
- 1× PCB (batch of 5, JLCPCB)
Total parts to solder: 25 (excluding PCB and button cap)
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Crystal | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | ER_OLEDM0.91_1x-I2C | Display:ER_OLEDM0.91_1x-I2C | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J2 |
Questions
How big is the HomeMade StreamDeck PCB?
It measures 71.5 × 46 mm and has 4 copper layers, 1.6 mm thick.
What parts does the HomeMade StreamDeck use?
26 parts, built around the ATMEGA32U4-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HomeMade StreamDeck KiCad files?
From the KondaxDev/HomeMade-StreamDeck repository on GitHub, at the commit this page was made from: the board is HomeMade StreamDeck.kicad_pcb and its schematic HomeMade StreamDeck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HomeMade StreamDeck design in my own project?
Its repository states no licence, so its author keeps all rights: ask KondaxDev before reusing the design.
Similar boards
- 2 layers228.4 × 85 mm
LeChiffre
tominabox1/Le-Chiffre-Keyboard
Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com
105 parts183GPL-3.0 - 2 layers228.6 × 76.8 mm
Schwann Rev0.5b
The-Royal/The_Royal_Open-Source-Projects
A Master Repository For All things Royal Made
127 parts159MIT - 2 layers30 × 65 mm
Keyboard mcu
dpapavas/lagrange-keyboard
A configurable, handwired, ergonomic keyboard
26 parts137AGPL-3.0 - 2 layers88.4 × 80 mm
LHS Controller PCB
dmcke5/ZenDeck
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
76 parts133CERN-OHL-S-2.0 - 2 layers259.5 × 89.1 mm
- 2 layers99.1 × 99.1 mm
Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75 - 2 layers323.9 × 95.1 mm
UnSplit
swiftrax/UnSplit
Ergo 40% mechanical keyboard with all components on the top with diodes arranged in an array
110 parts68GPL-2.0