koki0517/Differential-SPI-AdapterDifferential SPI Adapter is an open-source printed circuit board by koki0517, from the koki0517/Differential-SPI-Adapter repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 89.8 × 21.5 mm with 23 parts on 36 nets, routed with 266 tracks and 87 vias.
It is built around the THVD1450D, AM26LV31CD and AM26LV32CD. Its parts include 8 capacitors, 6 ICs, 5 resistors and 4 connectors. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7, C8 |
| 2 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Horizontal | J1, J3 |
| 2 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | J2, J4 |
| 2 | THVD1450D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 2 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U5, U6 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | AM26LV31CD | AM26LV31:D16 | U1 |
| 1 | AM26LV32CD | AM26LV31:D16 | U2 |
anushakatikireddy/STM32-Industrial_Encoder_Node
Compact industrial encoder node designed for reliable position sensing and communication in robotics and motion control applications, developed as a complete hardware solution in KiCad.
benmcnelly/walter-hardware
This repository contains all hardware information about Walter and shields
Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.
embeddedalpha/Digital-Humidity-Gauge
🎯 Dry‑bulb Temperature 🎯 Relative humidity 🎯 Barometric pressure 🎯 Saturation vapour pressure 🎯 Actual vapour pressure 🎯 Humidity (mixing) ratio 🎯 Absolute humidity 🎯 Dew‑point temperature 🎯 Wet‑bulb…
harp-tech/device.faststepper
A fast moving stepper motor controller device, with acceleration, jerk control, and end stop support
PragyanSenDeka/RaspberryPiPicoBasedHomeAutomationPCB
Home automation node based on Raspberry Pi Pico W with WiFi and RS485/MODBUS. Features DIP-switch addressing, SHT31 temperature/humidity sensor, QWIIC I2C, RGB LED, buttons, SPI expansion, and a 230V 16A relay.
It measures 89.8 × 21.5 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the THVD1450D, AM26LV31CD and AM26LV32CD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the koki0517/Differential-SPI-Adapter repository on GitHub, at the commit this page was made from: the board is Differential-SPI-Adapter.kicad_pcb and its schematic Differential-SPI-Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).