Skip to the content
2 layersOnyks iot esp32-template, the printed circuit board in 3D

Onyks iot esp32-template

knonyks/onyks-iot-docs

Documentation, lectures

Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
57
Pads
117
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
9 Nov 2024
Updated
23 Jul 2025

Overview

Onyks iot esp32-template is an open-source printed circuit board by knonyks, from the knonyks/onyks-iot-docs repository on GitHub. It is a 2-layer board with 20 parts on 57 nets.

It is built around the ESP32-WROOM-32D, TLV75733PDBV and SS8050, with the WS2812B among its other parts. Its parts include 7 capacitors, 4 resistors, 2 ICs, 2 transistors and 2 connectors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.

Main components

4

README

README.md

ONYKS IoT - Dokumentacja

14.11.2024

Z czego korzystamy

Co zrobić do następnego spotkania

  • zastanowić się jak ma działać urządzenie
  • znaleźć główne peryferia spełniajace założenia projektu
  • zaplanowanie maksymalnego poboru prądu przez dobrane peryferia
    • nie projektujemy jeszcze układu zasilania
  • opcjonalnie: mały schemat w drawio
  • zapoznać się z przykładowym devbardem

Gdzie czytać

  • oficjalny devboard - warto zapoznać się
    • na dole jest dokumentacja: specyfikacja techniczna, schematy, płytka PCB
  • wprowadzenie do KiCADa
  • na przyszłość, można czytać w wolnej chwili wprowadzenie do ESP32

Podstawowe założenia

  • zasilanie 3,3 V
  • komunikacja Bluetooth (na tym etapie projektu to tylko ciekawostka)
  • nie będzie programatora na płytce (programatory będą osobno)
  • interfejsy UART i JTAG do programowania i debuggowania
  • przycisk "reset"

Components

Connectors

  • UART for programming

    • Conn_01x06_Pin
    • Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical
      1. VCC (3.3V)
      2. GND
      3. TXD (UART Transmit)
      4. RXD (UART Receive)
      5. DTR
      6. RTS
  • JTAG for debugging (TMS, TCK, TDI, TDO, GND)

    • Conn_02x05_Odd_Even
    • Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical
  • UART for communication

    1. GND
    2. TXD (UART Transmit)
    3. RXD (UART Receive)

Parts

20
QtyValueFootprintReferences
322uFCapacitor_SMD:C_0603_1608MetricC1, C6, C7
210kResistor_SMD:R_0603_1608MetricR2, R3
210uFCapacitor_SMD:C_0603_1608MetricC4, C5
2RResistor_SMD:R_0603_1608MetricR1, R4
2SS8050Package_TO_SOT_SMD:SOT-23-3Q1, Q2
10.1uFCapacitor_SMD:C_0603_1608MetricC2
1BOOTButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW1
1CResistor_SMD:R_0603_1608MetricC3
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ3
1ESP32-WROOM-32DRF_Module:ESP32-WROOM-32DU1
1RESETButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW2
1TLV75733PDBVPackage_TO_SOT_SMD:SOT-23-5U2
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1

Similar boards

  • 2 layers54.9 × 72.1 mmOnyks iot esp32-monitor power, the printed circuit board in 3D

    Onyks iot esp32-monitor power

    knonyks/onyks-iot-monitor-power

    Power outlet voltage monitoring for energy tracking and safety.

    54 parts
  • 4 layers50 × 50 mmOnyks iot monitor weather pcb, the printed circuit board in 3D

    Onyks iot monitor weather pcb

    knonyks/onyks-iot-monitor-weather

    Weather station equipped with dust, temperature, and CO2 sensors for air quality monitoring.

    43 parts
  • 2 layers124.8 × 68 mmESP-32-RELAY CONTROLLER, the printed circuit board in 3D

    ESP-32-RELAY CONTROLLER

    pasachan/ESP-32-RELAY-CONTROLLER

    An 8-channel relay controller with Wi-Fi, an RS-485 field bus, and a 12 V power rail for downstream nodes. Designed as the master board for a small home-automation network: this board switches loads directly, talks to…

    106 parts1CERN-OHL-P-2.0
  • 2 layers190.5 × 121.8 mmGantry PCBv2, the printed circuit board in 3D

    Gantry PCBv2

    4rynv/Eklavya_Gantry

    an attempt to automate screwing out and in of screw holes arranged in a matrix formation

    173 parts12MIT
  • 2 layers38.3 × 50 mmESP32-Dev Board, the printed circuit board in 3D

    ESP32-Dev Board

    aarthirethinabala/ESP32-Dev-Board

    Custom ESP32 development board designed and routed in KiCad.

    36 parts
  • 2 layers86 × 65 mmIwaki hardware, the printed circuit board in 3D

    Iwaki hardware

    ahsanu123/iwaki

    🐟 IWAKI, automated fish cultivation system.

    91 parts
  • 2 layers61 × 77.8 mmReforge 1, the printed circuit board in 3D

    Reforge 1

    kishoriju-vrind/Reforge

    96 parts

Questions

What parts does the Onyks iot esp32-template use?

20 parts, built around the ESP32-WROOM-32D, TLV75733PDBV, SS8050 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Onyks iot esp32-template KiCad files?

From the knonyks/onyks-iot-docs repository on GitHub, at the commit this page was made from: the board is templates/pcb/onyks-iot-esp32-template/onyks-iot-esp32-template.kicad_pcb and its schematic templates/pcb/onyks-iot-esp32-template/onyks-iot-esp32-template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Onyks iot esp32-template design in my own project?

Its repository states no licence, so its author keeps all rights: ask knonyks before reusing the design.