2 layers87 × 71 mm
2 layers22 × 27 mm
STM8 board
kmezynski/stm8_development_boardSTM8S003F3 development board
- Size
- 22 × 27 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 23
- Pads
- 66
- Tracks, vias
- 168, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 May 2020
- Updated
- 21 May 2020
Overview
STM8 board is an open-source printed circuit board by kmezynski, from the kmezynski/stm8_development_board repository on GitHub, published under the MIT licence. It is a 2-layer board of 22 × 27 mm with 16 parts on 23 nets, routed with 168 tracks and 7 vias.
It is built around the STM8S003F3P6. Its parts include 5 capacitors, 4 connectors, 2 resistors, 2 diodes and 1 IC. It belongs with the microcontroller boards boards and the STM8 boards of this library.
Main components
1README
README.mdstm8_development board
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | LOGO | STM8_board:duck_logo1 | G*** |
| 1 | STM8S003F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
Questions
How big is the STM8 board PCB?
It measures 22 × 27 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM8 board use?
16 parts, built around the STM8S003F3P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM8 board KiCad files?
From the kmezynski/stm8_development_board repository on GitHub, at the commit this page was made from: the board is STM8_board/STM8_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM8 board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.1 × 41.2 mm
Ir signalgen lite
dilshan/ir-clone
Open-source infrared remote control signal analysis and generating tool
40 parts58MIT - 4 layers26.4 × 56 mm
RPI5-SDexpress Hat
will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"
51 parts37MIT - 4 layers65 × 56 mm
- 4 layers
Kvm base
thatoddmailbox/kvm-base
The main board for the open-source HDMI KVM switch I built.
70 parts19 - 2 layers
Ctrl brd reduced
alsav/stm8-soldering-station-controller
Tomizawa FZ-880B soldering station controller open-source firmware
14 parts12 - 2 layers72.8 × 32 mm
- 2 layers65 × 56 mm
Ras pi supercap ups
akuker/SuperUPS
This is a fork of the original Supercapacitor UPS board for a Raspberry Pi by Scott Baker, http://www.smbaker.com/
88 parts7