
Current3x3A Artiq
KLFAMO/current3x3A_Artiq
3 channel current driver (up to 3A each channel) compatible with Artiq

100A current driver compatible with Artiq
Current100A Artiq is an open-source printed circuit board by KLFAMO, from the KLFAMO/current100A_Artiq repository on GitHub. It is a 4-layer board of 161 × 100 mm with 337 parts on 301 nets, routed with 3,017 tracks and 364 vias.
It is built around the SN65MLVD040RGZT, LTC2380CMS-24#PBF and ADA4895-1ARJZ-R2, with the DM3AT-SF-PEJM5, TLP2361(TPL,E and 74LVC2T45DC,125-JSM among its other parts. Its parts include 156 capacitors, 67 resistors, 29 ICs, 16 inductors and 13 diodes.
100A current driver compatible with Artiq. At the moment, device is compatible with Sinara package size and includes all Sinara connectors. There is no software compatibility yet.
Power supply - two wires (+ and -) from Delta Power Supply. (will be WAGO connector asap). Warning:
Coil 1 (L1) - two wires from one coil (will be WAGO connector asap)
Coil 2 (L2) - two wires from second coil (this coil is direction switchable) (will be WAGO connector asap)
LEM IN 100-S is used for current measurement.
Power supply MSTBA green connector (0 and +12V) for control board.
Ethernet - User Interface communication.
SMA input - (-10V to +10V) current control by voltage (from external control program). 1V -> 10A
4x BNC inputs - not used yet
USB micro - not used yet
User interface is available via TCP/IP on port 10. Depending on configuration IP address is static or taken from DHCP - this must be set when programming uC. After connecting to the device user is able to change setting by sending commands.
MODE 0 - switch off current
MODE 1 - current control via voltage input (SMA input on front panel)
MODE 2 - current control via ethernet user interface (CUR command)
CUR 10.2 - set current 10.2 A (only in mode 2)
IMAX 25 - set max possible current value to 25A
ERMAX 1 - max 1A change in each cycle (0.1ms)
MODE 3 - set gate voltage using VG parameter
I -0.04 - set gain -0.04 (this is bese gain for 50A - it is rescaled by uC for lower current due to udjust transistor characteristics)
DIR x - L2 coil current direction (x=-1: current positive, x=1: current negative, x=0: no current - all transistors blocked)
DST x - direction switching treshold; current direction switchin in coil L2 is possible only if absolute current value is less than x
VG - current gate voltage; in MODE 3 is set manually
CALIB 1 - gate voltage - current characteristics callibration. Improves current control.
CALIB 4 - LEM zero current callibration (automaticaly done during startup)
This work has received funding from the European Partnership on Metrology, co-financed by the European Union’s Horizon Europe Research and Innovation Programme and by the Participating States, under grant number 22IEM01 TOCK.

Please add your comments in Issues Github section (in top of this website).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | 100n 50V X7R | Capacitor_SMD:C_0603_1608Metric | C11, C12, C19, C116, C118, C120, C121, C130, C131, C136, C137, C138, C139, C140, C153, C156 +27 |
| 20 | GRM21BR61E106KA73L | Capacitor_SMD:C_0805_2012Metric | C5, C16, C17, C18, C25, C26, C37, C141, C142, C143, C144, C145, C146, C150, C151, C152 +4 |
| 16 | 100p 50V C0G | Capacitor_SMD:C_0603_1608Metric | C23, C39, C40, C46, C52, C55, C97, C98, C102, C111, C112, C126, C129, C133, C134, C154 |
| 16 | 1k 1% | Resistor_SMD:R_0603_1608Metric | R11, R32, R35, R40, R41, R43, R45, R49, R53, R54, R55, R56, R57, R63, R64, R67 |
| 14 | GCM188R71E105KA64J | Capacitor_SMD:C_0603_1608Metric | C41, C42, C44, C95, C100, C101, C104, C106, C117, C124, C125, C127, C128, C157 |
| 12 | 100R 1% | Resistor_SMD:R_0603_1608Metric | R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 |
| 8 | GCM31CR71C106KA64L | Capacitor_SMD:C_1206_3216Metric | C50, C53, C90, C92, C94, C103, C113, C122 |
| 7 | GRM31C5C1H104JA01L | Capacitor_SMD:C_1206_3216Metric | C51, C54, C91, C105, C114, C132, C135 |
| 7 | PAD | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | PP1, PP2, PP3, PP4, PP5, PP6, PP7 |
| 6 | 1n 50V C0G | Capacitor_SMD:C_0603_1608Metric | C38, C47, C49, C96, C107, C109 |
| 6 | 1n C0G 100V | Capacitor_SMD:C_0805_2012Metric | C14, C15, C62, C147, C148, C149 |
| 6 | GRM21BR71A106KA73L | Capacitor_SMD:C_0805_2012Metric | C34, C35, C85, C86, C87, C88 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H3, H4, H5, H6, H7, H8 |
| 5 | 10k 1% | Resistor_SMD:R_0603_1608Metric | R3, R6, R44, R51, R65 |
| 5 | 10u X7R 50V | Capacitor_SMD:C_1210_3225Metric | C3, C4, C6, C7, C56 |
| 5 | 50225C Murata | ff_lib_7:L_CommonMode_Murata_5000 | L1, L10, L15, L16, L17 |
| 5 | BLM18HE102SN1D | Inductor_SMD:L_0603_1608Metric | L9, L11, L12, L13, L14 |
| 5 | TLP2361(TPL,E | Package_SO:MFSOP6-5_4.4x3.6mm_P1.27mm | U25, U26, U27, U36, U38 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P2V1, P5V1, P6V1, P12V1, VuC1 |
| 4 | 100R 1% | Resistor_SMD:R_0805_2012Metric | R46, R47, R48, R52 |
| 4 | 150R 1% | Resistor_SMD:R_0603_1608Metric | R58, R59, R60, R61 |
| 4 | 2k 1% | Resistor_SMD:R_0603_1608Metric | R9, R10, R36, R37 |
| 4 | 4,99k 1% | Resistor_SMD:R_0603_1608Metric | R7, R8, R33, R34 |
| 4 | 49,9R 1% | Resistor_SMD:R_0603_1608Metric | R12, R13, R38, R39 |
| 4 | GRM31CR71A226KE15L | Capacitor_SMD:C_1206_3216Metric | C24, C27, C28, C29 |
| 4 | TLP701AF(F) | Package_SO:SSO-6_6.8x4.6mm_P1.27mm_Clearance7mm | U28, U29, U30, U31 |
| 4 | TSS40U-RGG | Diode_SMD:D_0603_1608Metric | D2, D4, D6, D8 |
| 3 | 5227161-1 | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J9, J10, J11 |
| 3 | BAT54SW | Package_TO_SOT_SMD:SOT-323_SC-70 | D9, D10, D11 |
| 3 | C1210C334J3JACAUTO | Capacitor_SMD:C_1210_3225Metric | C43, C93, C99 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3 |
| 3 | GCM188R71E474KA64D | Capacitor_SMD:C_0603_1608Metric | C66, C69, C70 |
| 3 | TME1215S | ff_lib_7:AM1SS-xxxxS | U33, U34, U35 |
| 3 | TS4148C RZG | Diode_SMD:D_0603_1608Metric | D13, D14, D15 |
| 2 | 10k 0,1% 10ppm | Resistor_SMD:R_0603_1608Metric | R29, R30 |
| 2 | 196k 1% | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 220R 1% | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 470p 50V C0G | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C48, C108 |
| 2 | 47UF 10V X7R | Capacitor_SMD:C_1210_3225Metric | C45, C110 |
| 2 | 74LVC2T45DC,125 | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U19, U20 |
| 2 | 82p 50V C0G | Capacitor_SMD:C_0603_1608Metric | C73, C74 |
| 2 | CZRU52C4V3 | Diode_SMD:D_0603_1608Metric | D3, D7 |
| 2 | GCJ31BR73A102KXJ1L | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | GCM32ER71E106KA57K | Capacitor_SMD:C_1210_3225Metric | C9, C10 |
| 2 | HV732BTTD1004F | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | IHLP2525CZER220M11 | Inductor_SMD:L_Vishay_IHLP-2525 | L7, L8 |
| 2 | Jumper_NO_Small | ff_lib_7:GS2_small | JP1, JP2 |
| 2 | LQH44PH220MPRL | ff_lib_7:L_MURATA_LQH44 | L2, L3 |
| 2 | LTC2380CMS-24#PBF | Package_SO:MSOP-16_3x4mm_P0.5mm | U8, U18 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2 |
| 2 | N2510-6002-RB | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4, J7 |
| 2 | RQ73C2B20RBTD | Resistor_SMD:R_1206_3216Metric | R28, R31 |
| 2 | SN65MLVD040RGZT | ff_lib_7:VQFN-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm_ThermalVias | U12, U13 |
| 2 | THS4561IDGKx | Package_SO:MSOP-8_3x3mm_P0.65mm | U7, U17 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R62 |
| 1 | 100p C0G 50V | Capacitor_SMD:C_0603_1608Metric | C115 |
| 1 | 22n C0G 25V | Capacitor_SMD:C_0805_2012Metric | C155 |
| 1 | 24AA02E48T-I/OT | Package_TO_SOT_SMD:SOT-23-5 | U14 |
| 1 | 2k4 1% | Resistor_SMD:R_0603_1608Metric | R66 |
| 1 | 5.0SMDJ12AS | Diode_SMD:D_SMC | D12 |
| 1 | 910R 1% | Resistor_SMD:R_0603_1608Metric | R50 |
| 1 | ADA4895-1ARJZ | Package_TO_SOT_SMD:SOT-23-6 | U16 |
| 1 | ADR4540BRZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U15 |
| 1 | ADuM121N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | AM1SS-1203SJZ | ff_lib_7:AM1SS-xxxxS | U9 |
| 1 | AP63200WU-7 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | AP63203WU-7 | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | AP7313-25SAG-7 | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | B6252H5-NPP3G-50 | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J8 |
| 1 | BLM18KG331SN1D | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | DM3AT-SF-PEJM5 | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R42 |
| 1 | GCM21BR71C335KA73L | Capacitor_SMD:C_0805_2012Metric | C119 |
| 1 | GRM1885C1H103JA01D | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | GRM31C5C1H104JA01L | Capacitor_SMD:C_0603_1608Metric | C123 |
| 1 | IHLP2525CZER100M01 | Inductor_SMD:L_Vishay_IHLP-2525 | L6 |
| 1 | Jumper_2_Bridged | ff_lib_7:GS2_small | JP3 |
| 1 | KL_FAMO_LOGO | ff_lib_7:kl_famo_logo | G1 |
| 1 | KL_FAMO_LOGO | ff_lib_7:kl_famo_logo_small | G2 |
| 1 | LD29150DT50R | Package_TO_SOT_SMD:TO-252-2 | U4 |
The 316 most common of 337 parts.

KLFAMO/current3x3A_Artiq
3 channel current driver (up to 3A each channel) compatible with Artiq

KLFAMO/relock_Artiq
This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication.

Geophysical-Instrumentation-Group-UL/Geophysical-Open-Seismic-Hardware
Hardware and firmware of the Geophysical Open Seismic Hardware project. The goal is to stimulate open development in geophysical instrumentation

OneAudio/OSVA
Open source versatible analyzer (24bits 1.536MSPS 2 Channels)

cepr/daly-to-lithium-balance-adapter
Replacement traction battery for a 2018 Energica Ego. The original Lithium Balance s-BMS master (BMCU) stays in the bike.
detectoresymicroelectronica/proyecto-integrador-gamma-tracker
Desarrollo de un sistema de detección de radiación gamma para cirugía laparoscópica radioguiada. Proyecto Integrador — IB 2026.

vl9i/spe-converter
Open-Source SPE-to-Ethernet converter board with SFP, RJ45, H-MTD and MATEnet

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research
It measures 161 × 100 mm and has 4 copper layers, 1.59 mm thick.
337 parts, built around the SN65MLVD040RGZT, LTC2380CMS-24#PBF, ADA4895-1ARJZ-R2 and DM3AT-SF-PEJM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KLFAMO/current100A_Artiq repository on GitHub, at the commit this page was made from: the board is kicad/current100A_Artiq.kicad_pcb and its schematic kicad/Power_supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KLFAMO before reusing the design.