
PhobGCC 2 0 0 proto 1
kje123/jesphob
A fork of the PhobGCC project, created for the JESNET Gamecube Controller

A fork of the PhobGCC project, created for the JESNET Gamecube Controller
Jesnet proto 1 is an open-source printed circuit board by kje123, from the kje123/jesphob repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 119.5 × 60.3 mm with 151 parts on 78 nets, routed with 860 tracks and 63 vias.
It is built around the RP2040, MCP3202-CI/P and W25Q128JVSIQ, with the USBLC6-2P6, AMS1117-3.3 and CUS10S30,H3F among its other parts. Its parts include 26 capacitors, 16 switches, 14 resistors, 13 ICs and 10 connectors. It belongs with the RP2040 boards of this library.
A fork of the PhobGCC project, created for the JESNET Gamecube Controller
If you've stumbled upon this, congrats! You have found this earlier than intended. This project is currently in the prototyping phase, so I do not recommend using this until I have done an official release, and I cannot help you if weird issues pop up.
If you wanna ask me questions or get involved, you can find me on Discord. My username is .kje
Original PhobGCC project here: https://github.com/PhobGCC
| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | , , , , , , , , , , , , , , , +40 | ||
| 13 | 100n | PhobGCC_2_0_0_footprints:C_0402_1005Metric | C17, C19, C20, C22, C24, C25, C26, C27, C28, C29, C30, C31, C32 |
| 6 | 0.047u | PhobGCC_2_0_0_footprints:C_0603_HandSoldering | C3, C4, C5, C6, C7, C8 |
| 4 | 2k | PhobGCC_2_0_0_footprints:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6 |
| 4 | Conn_01x02 | PhobGCC_2_0_0_footprints:PinHeader_1x02_P2.00mm_Horizontal | J3, J3, J3, J3 |
| 4 | DRV5055A3xDBZxQ1 | PhobGCC_2_0_0_footprints:SOT-23 | U4, U9, U10, U11 |
| 3 | 10k | PhobGCC_2_0_0_footprints:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R15 |
| 3 | 2.2mm | PhobGCC_2_0_0_footprints:MountingHole_2.2mm | H9, H9, H9 |
| 2 | 100R | PhobGCC_2_0_0_footprints:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 2 | 10u | PhobGCC_2_0_0_footprints:C_0805_2012Metric | C16, C18 |
| 2 | 1k | PhobGCC_2_0_0_footprints:C_0402_1005Metric | R16, R18 |
| 2 | 1u | PhobGCC_2_0_0_footprints:C_0402_1005Metric | C21, C23 |
| 2 | 27 | PhobGCC_2_0_0_footprints:C_0402_1005Metric | R20, R21 |
| 2 | 27p | PhobGCC_2_0_0_footprints:C_0402_1005Metric | C14, C15 |
| 2 | CUS10S30,H3F | Diode_SMD:D_SOD-323 | D1, D5 |
| 2 | Conn_01x06 | PhobGCC_2_0_0_footprints:PinSocket_1x06_P2.00mm_Vertical | J14, J15 |
| 2 | MCP3202 | PhobGCC_2_0_0_footprints:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 2 | Q_NMOS_GSD | PhobGCC_2_0_0_footprints:SOT-23 | Q1, Q3 |
| 2 | R_POT_MountingPin | PhobGCC_2_0_0_footprints:GCC_Slider | RV1, RV2 |
| 2 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U12, U13 |
| 2 | Z | PhobGCC_2_0_0_footprints:Trigger_Contact | SW2, SW2 |
| 1 | 1.2mm | PhobGCC_2_0_0_footprints:MountingHole_1.8mm | H10 |
| 1 | 1.7mm | PhobGCC_2_0_0_footprints:MountingHole_1.8mm | H5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 2mm | PhobGCC_2_0_0_footprints:MountingHole_1.8mm | H10 |
| 1 | 47u | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C1 |
| 1 | A | PhobGCC_2_0_0_footprints:ABXY_Contact_Omron_Switch_Circley | SW1 |
| 1 | AMS1117-3.3 | PhobGCC_2_0_0_footprints:SOT-223-3_TabPin2 | U6 |
| 1 | B | PhobGCC_2_0_0_footprints:ABXY_Contact_Omron_Switch_Circley | SW2 |
| 1 | BOOTSEL | PhobGCC_2_0_0_footprints:SW_TS-1187A-B-A-B | S1 |
| 1 | Conn_01x01 | PhobGCC_2_0_0_footprints:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Female | PhobGCC_2_0_0_footprints:GCC_Header_Straight_1x06_Pitch2.00mm | J1 |
| 1 | Crystal_GND24 | PhobGCC_2_0_0_footprints:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Ddown | PhobGCC_2_0_0_footprints:Dpad_Contact_TL3315NF_2_ZigZag | SW12 |
| 1 | Dleft | PhobGCC_2_0_0_footprints:Dpad_Contact_TL3315NF_2_ZigZag | SW9 |
| 1 | Dright | PhobGCC_2_0_0_footprints:Dpad_Contact_TL3315NF_2_ZigZag | SW11 |
| 1 | Dup | PhobGCC_2_0_0_footprints:Dpad_Contact_TL3315NF_2_ZigZag | SW10 |
| 1 | Fuse | PhobGCC_2_0_0_footprints:Fuse_1206_3216Metric | F1 |
| 1 | L | PhobGCC_2_0_0_footprints:Trigger_Contact | SW2 |
| 1 | L | PhobGCC_2_0_0_footprints:Pin_Header_Straight_1x02_Pitch2.54mm | SW6 |
| 1 | M7C | PhobGCC_2_0_0_footprints:D_SOD-123 | D2 |
| 1 | Q_PMOS_GDS | PhobGCC_2_0_0_footprints:SOT-23 | Q2 |
| 1 | R | PhobGCC_2_0_0_footprints:Pin_Header_Straight_1x02_Pitch2.54mm | SW7 |
| 1 | R | PhobGCC_2_0_0_footprints:Trigger_Contact | SW2 |
| 1 | RP2040 | PhobGCC_2_0_0_footprints:RP2040-QFN-56 | U8 |
| 1 | Rumble | PhobGCC_2_0_0_footprints:rumble_pins | J5 |
| 1 | Start | PhobGCC_2_0_0_footprints:Start_Contact | SW5 |
| 1 | Stickbox_Assembly_CStick | PhobGCC_2_0_0_footprints:GCC_Stickbox_Hall_Only | U5 |
| 1 | Stickbox_Assembly_Main | PhobGCC_2_0_0_footprints:GCC_Stickbox_Hall_Only | U2 |
| 1 | USB_B_Micro | PhobGCC_2_0_0_footprints:USB_Micro-B_Amphenol_10118194_Horizontal | J8 |
| 1 | W25Q128JVS | PhobGCC_2_0_0_footprints:SOIC-8_5.23x5.23mm_P1.27mm | U7 |
| 1 | X | PhobGCC_2_0_0_footprints:ABXY_Contact_Omron_Switch_Circley | SW3 |
| 1 | Y | PhobGCC_2_0_0_footprints:ABXY_Contact_Omron_Switch_Circley | SW4 |

kje123/jesphob
A fork of the PhobGCC project, created for the JESNET Gamecube Controller

Naxdy/NaxGCC-HW
The main repository is located at git.naxdy.org. The GitHub mirror exists solely for the sake of discoverability and redundancy.

Jwray0/phori_2
Forked from the https://github.com/PhobGCC/PhobGCCv2-HW Project

plants-tech/Zinnia
fork of a fork of phob 2.x (Phob 2.x Official -> PhloraGCC -> Zinnia)


Maverick-Shark/X65_BigMiST
The X65 is an ultimate computer for everyone interested in the venerable 65-series of 8-bit and 16-bit CPUs, i.e. the 6502 and 65816.

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

It measures 119.5 × 60.3 mm and has 2 copper layers, 1.6 mm thick.
151 parts, built around the RP2040, MCP3202-CI/P, W25Q128JVSIQ and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kje123/jesphob repository on GitHub, at the commit this page was made from: the board is KiCAD/jesnet_proto_1.kicad_pcb and its schematic KiCAD/TriggerBoard/TriggerBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).