Skip to the content
2 layers56.9 × 38.6 mmV1a, the printed circuit board in 3D

the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

Size
56.9 × 38.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
70
Pads
122
Tracks, vias
234, 56
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
12 Jan 2024
Updated
18 Jan 2025

Overview

V1a is an open-source printed circuit board by KITTY-6502, from the KITTY-6502/hardware repository on GitHub. It is a 2-layer board of 56.9 × 38.6 mm with 11 parts on 70 nets, routed with 234 tracks and 56 vias.

It is built around the MCP2221A-I/P. Its parts include 3 capacitors, 3 diodes, 2 ICs, 2 connectors and 1 resistor.

Main components

1

README

README.md

KITTY Computer

the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

Quick Specs:

  • Bus Speed: 3Mhz
  • CPU:* w65c02s @~2.2Mhz (average)
  • RAM: 28Kb SRAM
  • Video: Custom, 256x256pixels, a text mode display using a preset font, 32x32 8x8 pixel characters, 16 color palette
  • Sound: Custom, 8x1 Wavetable Audio, 3 melodic + 1 percussive channels, all with 4bit+4bit stereo volume control.
  • Input: 40-Key Mechanical Keyboard
  • Media/Expansion: 2 Cartridge Slots, each with up to 128x32Kb banks.
  • Interrupts: /IRQ triggered when the video circuit has drawn the last visible pixels on the frame.
  • Output: RGB PAL (50hz), via a SCART connector.

Computer Manual Schematic

Picture of Prototype Board Test Program

Parts

11
QtyValueFootprintReferences
3C_SmallCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2, C3
3LED_FilledLED_THT:LED_D3.0mmD1, D2, D3
116C550Package_LCC:PLCC-44_THT-SocketU1
1820ΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1Conn_02x22_Odd_EvenSmal:KITTY_Cart_EdgeJ1
1MCP2221APackage_DIP:DIP-14_W7.62mm_SocketU2
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ2

More from KITTY-6502/hardware

9
  • 2 layers234 × 100 mmV2b, the printed circuit board in 3D

    V2b

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    147 parts
  • 2 layers234 × 100 mmV1c, the printed circuit board in 3D

    V1c

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    145 parts
  • 2 layers234 × 87.3 mmV1a, the printed circuit board in 3D

    V1a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    134 parts
  • 2 layers234 × 87.3 mmV0c, the printed circuit board in 3D

    V0c

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    123 parts
  • 2 layers240.3 × 76 mmKeyboard, the printed circuit board in 3D

    Keyboard

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    84 parts
  • 2 layers56.9 × 38.6 mmV1a, the printed circuit board in 3D

    V1a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    8 parts
  • 2 layers58.4 × 40 mmV2a, the printed circuit board in 3D

    V2a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    7 parts
  • 2 layers56.9 × 38.6 mmV1a, the printed circuit board in 3D

    V1a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    6 parts
  • 2 layers58.4 × 40 mmV2a, the printed circuit board in 3D

    V2a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    4 parts

Similar boards

  • 2 layers49.5 × 49.5 mmAtmega gpib, the printed circuit board in 3D

    Atmega gpib

    cellularmitosis/atmega-gpib

    An ATmega-based GPIB-to-USB adapter board.

    24 parts16MIT
  • 2 layers74.9 × 89.2 mmPictas, the printed circuit board in 3D

    Pictas

    bigbass1997/PICTAS

    Low-cost replay device for playing back Tool Assisted Speedruns on real hardware

    37 parts9
  • 2 layers63.5 × 45.5 mmF ramune avr, the printed circuit board in 3D

    F ramune avr

    obskyr/f-ramune

    A device for testing and programming FRAM chips! Finally you can be sure that FRAM you bought from China works.

    27 parts6
  • 2 layers44.1 × 82.7 mmRemote64-controller, the printed circuit board in 3D

    Remote64-controller

    bigbass1997/remote64

    Provides a method for N64 homebrew developers to test their roms on remote hardware

    20 parts4
  • 2 layers39.4 × 20.3 mmPsense, the printed circuit board in 3D

    Psense

    noahp/psense

    🔌 Basic USB interfaced power sensor

    25 parts3
  • 4 layers100 × 100 mmSimple010-16, the printed circuit board in 3D

    Simple010-16

    harrowm/Simple010

    68010 SBC using a ATF1608 CPLD based on teh rosco_m68k SBC

    75 parts1MIT

Questions

How big is the V1a PCB?

It measures 56.9 × 38.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the V1a use?

11 parts, built around the MCP2221A-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the V1a KiCad files?

From the KITTY-6502/hardware repository on GitHub, at the commit this page was made from: the board is Kicad/serialcart/v1a/v1a.kicad_pcb and its schematic Kicad/case/back/back.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the V1a design in my own project?

Its repository states no licence, so its author keeps all rights: ask KITTY-6502 before reusing the design.