
So-8-fet panelized
kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...
Sot-23-panelized is an open-source printed circuit board by kimballa, from the kimballa/breakout-boards repository on GitHub. It is a 2-layer board of 94.2 × 87.9 mm with 780 parts on 360 nets, routed with 840 tracks and 0 vias.
It is built around the BCM847DS. Its parts include 120 connectors and 60 transistors. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Breakout boards for {16, 20}-pin wide-body SOIC (1.27mm pitch) ICs that fit in standard pin alignment on a breadboard.
The IC itself sits to the side of the pin headers rather than between them, to achieve a narrow breakout board profile (12.8mm) that straddles only one extra row of pins on one or the other side of the breadboard centerline.
A separate through-hole exists in the SOIC-16 board, connected to the ground plane. Solder a
resistor leg or other thin wire from the GND hole to top of the header pin that
represents ground for the IC. (Or leave floating if there is no appropriate ground pin for
the IC.)
The file name (SOIC-DW) derives from Texas Instruments' name for the wide SOIC package type.
The latest gerber files for submitting to a board fab are in the rtm/ directory.
If submitting to JLCPCB, select 'panel by customer', 'number of designs' = 2.
The main project file includes one of each representative breakout board. Panels with 8x
SOIC-16 and 6x SOIC-20 format were generated using KiKit. If you change the main PCB
CAD file, you should then open a KiCad Command Prompt in this directory and run python panelize.py. You can edit panelize.py first to set variables related to the output file
to generate.
The current layout is intended to fit in the 100x100 mm area that offers the best deal for JLCPCB, but you can extend taller or wider if desired.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 600 | NPTH | NPTH | KiKit_MB_100_2, KiKit_MB_100_3, KiKit_MB_100_4, KiKit_MB_100_5, KiKit_MB_100_6, KiKit_MB_101_2, KiKit_MB_101_3, KiKit_MB_101_4, KiKit_MB_101_5, KiKit_MB_101_6, KiKit_MB_102_2, KiKit_MB_102_3, KiKit_MB_102_4, KiKit_MB_102_5, KiKit_MB_102_6, KiKit_MB_103_2 +584 |
| 120 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +104 |
| 60 | BCM847DS | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1 +44 |

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...


kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

kimballa/breakout-boards
Panelized breakout boards for SOIC, TSSOP, SOT-23, and more...

JMHanson4/Miasma_1.03_Revised
1) Updated the footprints and symbols to ones included in KiCAD 5.1.5, or otherwise included the auxillary libraries in the repository.

JordanAceto/VCF_plug_in_boards
Various small synthesizer Voltage Controlled Filter pcbs

pierrebaillargeon/Microplate-Assistive-Pipetting-Light-Emitter
Microplate Assistive Pipetting Light Emitter (M.A.P.L.E.)


kitspace-test-repos/rrf_rpi_skr_adapter
Raspberry Pi to SKR/SKR Pro Adapter for ReprapFirmware ======================================================


coon42/stmbl_otter
sudo dfu-util -d 0483:df11 -a 0 -s 0x8000000:leave -D objhvf3/hvf3.bin

alpyen/fpga-mediaplayer
HDL, Hardware & Software Development project to playback a video with sound and learn while doing so.
It measures 94.2 × 87.9 mm and has 2 copper layers, 1.6 mm thick.
780 parts, built around the BCM847DS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kimballa/breakout-boards repository on GitHub, at the commit this page was made from: the board is sot-23/panelized/sot-23-panelized.kicad_pcb and its schematic micromatch-20/micromatch-20.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kimballa before reusing the design.