
Christmas card
Iver-Iscariot/pcb_christmas_card
PCB christmas card designed in kicad 7. Uses CMOS 555 chips to flash LED's

Project Tsukuyomi is an open-source printed circuit board by khanaaaaaa, from the khanaaaaaa/Project-Tsukuyomi repository on GitHub. It is a 2-layer board with 47 parts on 53 nets, routed with 308 tracks and 16 vias.
It is built around the NE555D and PN2222A. Its parts include 31 diodes, 7 resistors, 3 transistors, 2 ICs and 1 capacitor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | LED | LED_THT:LED_D5.0mm | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +14 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6 |
| 3 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | LOGO | LOGO | , G*** |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 200 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 4017 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | D | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |

Iver-Iscariot/pcb_christmas_card
PCB christmas card designed in kicad 7. Uses CMOS 555 chips to flash LED's


Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors




Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.
47 parts, built around the NE555D and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the khanaaaaaa/Project-Tsukuyomi repository on GitHub, at the commit this page was made from: the board is PCB/Project-Tsukuyomi.kicad_pcb and its schematic PCB/Project-Tsukuyomi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask khanaaaaaa before reusing the design.