
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Pin compatible with the thing that sounds a bit like this. Same functions- oled, encoder- added breakouts/test points on rows and columns, and added battery/switch positions in case you want to wireless convert it.
Fauxmac plus is an open-source printed circuit board by keyboard-magpie, from the keyboard-magpie/fauxmac-plus repository on GitHub, published under the MIT licence. It is a 2-layer board of 86.5 × 89 mm with 45 parts on 39 nets, routed with 468 tracks and 31 vias.
It is built around the WS2812B. Its parts include 12 diodes, 12 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Pin compatible with the thing that sounds a bit like this. Same functions- oled, encoder- added breakouts/test points on rows and columns, and added battery/switch positions in case you want to wireless convert it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | KEYSW | Keebio-Parts:MX-Alps-Choc-1U-NoLED | K1, K2, K3, K4, K5, K6, K7, K8, K9, K10, K11, K12 |
| 7 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | col0, col1, col2, row0, row1, row2, row3 |
| 5 | TestPoint | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | batt-, batt+, dout, gnd, vcc |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | rgb1, rgb2, rgb3, rgb4 |
| 1 | ProMicro | canadian_footprints:Pro_Micro | U1 |
| 1 | Rotary_Encoder_Switch | Keebio-Parts:RotaryEncoder_EC11 | enc1 |
| 1 | SW_DIP_x01 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | on/off |
| 1 | SW_PUSH | Keebio-Parts:SW_Tactile_SPST_Angled_MJTP1117 | reset |
| 1 | oled | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | oled |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 86.5 × 89 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the keyboard-magpie/fauxmac-plus repository on GitHub, at the commit this page was made from: the board is fauxmac-plus.kicad_pcb and its schematic fauxmac-plus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).