4 layers41.4 × 108 mm
4 layers20.8 × 40.6 mm
FT232RNL USB
kc1awv/FT232R_USB2- Size
- 20.8 × 40.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 38
- Pads
- 111
- Tracks, vias
- 189, 25
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Aug 2023
- Updated
- 8 Aug 2023
Overview
FT232RNL USB is an open-source printed circuit board by kc1awv, from the kc1awv/FT232R_USB repository on GitHub. It is a 4-layer board of 20.8 × 40.6 mm with 25 parts on 38 nets, routed with 189 tracks and 25 vias.
It is built around the FT232RL, USBLC6-2SC6 and BAT60A. Its parts include 7 resistors, 6 capacitors, 5 connectors, 4 diodes and 2 ICs.
Main components
3
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
BAT60A
SOD-323Schottky DiodesSlkor
README
README.mdFT232R_USB
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 120R | Resistor_SMD:R_0603_1608Metric | R5, R6, R7 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 47pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4, J5 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 4.7uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C3 |
| 1 | 40 Ohms @ 100MHz | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | BAT60A | Diode_SMD:D_SOD-323 | D1 |
| 1 | BLU | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | GRN | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
Similar boards
- 4 layers132 × 84.5 mm
Hamodule
crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.
207 parts28 - 4 layers65.1 × 30.2 mm
- 2 layers75.3 × 33.8 mm
24-ch relay driver kicad
dilshan/24ch-usb-high-voltage-driver
24-Channel USB high voltage driver.
35 parts5MIT - 2 layers30 × 68.5 mm
- 4 layers102.7 × 102.7 mm
My drone
Motasim-1/Wifi-quadcopter-pcb
Custom PCB design for a WiFi-controlled quadcopter based on the ESP32 microcontroller. The board was designed in KiCad, assembled using solder paste and a reflow oven, and tested with four motor outputs controlled…
67 parts - 2 layers138.8 × 96.4 mm
- 2 layers154 × 131.5 mm
Combined Stencil3
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
346 parts
Questions
How big is the FT232RNL USB PCB?
It measures 20.8 × 40.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FT232RNL USB use?
25 parts, built around the FT232RL, USBLC6-2SC6 and BAT60A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FT232RNL USB KiCad files?
From the kc1awv/FT232R_USB repository on GitHub, at the commit this page was made from: the board is FT232RNL_USB.kicad_pcb and its schematic FT232RNL_USB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FT232RNL USB design in my own project?
Its repository states no licence, so its author keeps all rights: ask kc1awv before reusing the design.