2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers112.4 × 137.2 mm
WLED32Hub
kayneyao/WLED32Hub- Size
- 112.4 × 137.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 75
- Pads
- 252
- Tracks, vias
- 250, 120
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 May 2025
- Updated
- 9 Jun 2025
Overview
WLED32Hub is an open-source printed circuit board by kayneyao, from the kayneyao/WLED32Hub repository on GitHub. It is a 2-layer board of 112.4 × 137.2 mm with 76 parts on 75 nets, routed with 250 tracks and 120 vias.
It is built around the IRLB8721PBF. Its parts include 19 connectors, 18 resistors, 16 transistors, 2 ICs and 1 fuse. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdWLED32Hub
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | GND, L1, L2, L3, L4, L5, L6, L7, L8, L10, L11, L12, L13, L14, L15, L16 +4 |
| 17 | 10kR | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17, R18 +1 |
| 16 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 16 | WAGO | TerminalBlock_WAGO:TerminalBlock_WAGO_2601-1102_1x02_P3.50mm_Horizontal | J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18 |
| 1 | 22kR | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | Arduino-Pro-Micro | footprints:Arduino_Pro_Micro | U2 |
| 1 | Conn_01x05 | footprints:SolderWirePad_1x05_SMD_1x2mm | J19 |
| 1 | ESP32-DevKit-V3.0 | footprints:ESP32_DevKit_V3.0 | U1 |
| 1 | Fuse | Fuse:Fuseholder_Blade_ATO_Littelfuse_Pudenz_2_Pin | F1 |
| 1 | Power WAGO | footprints:WAGO_2606-1102 | J2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm
- 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1
Questions
How big is the WLED32Hub PCB?
It measures 112.4 × 137.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WLED32Hub use?
76 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WLED32Hub KiCad files?
From the kayneyao/WLED32Hub repository on GitHub, at the commit this page was made from: the board is WLED32Hub.kicad_pcb and its schematic WLED32Hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WLED32Hub design in my own project?
Its repository states no licence, so its author keeps all rights: ask kayneyao before reusing the design.