

TerkaPCB
- Size
- 144 × 133 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 77
- Pads
- 388
- Tracks, vias
- 578, 82
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Nov 2024
- Updated
- 4 Apr 2026
Overview
TerkaPCB is an open-source printed circuit board by kaszmirek, from the kaszmirek/TerkaPCB repository on GitHub. It is a 4-layer board of 144 × 133 mm with 99 parts on 77 nets, routed with 578 tracks and 82 vias.
It is built around the 74AHCT1G126GV, ESP32-C3-WROOM-02-H4 and TPS61230DRC, with the BQ27220YZF, SRV05-4 and TLV76133DCY among its other parts. Its parts include 33 resistors, 24 diodes, 18 capacitors, 9 ICs and 3 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1274AHCT1G126GV
SOT-23-5L-40℃~+125℃ 1 1 2V~5.5V 40uA 5ns@5V 74AHCT 8mA 8mA Output enable、Level shifting Tri-State Unidirectional SOT-23-5L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, TransceiversESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS61230DRC
VSON-10-EP(3x3)-40℃~+125℃ 1 2.3V~5.5V 2.5V~5.5V 2MHz 4A 60uA Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersBQ27220YZF
DSBGA-9-40℃~+85℃ 1 2.45V~4.5V 50uA I2C Lithium Battery Monitoring IC Support DSBGA-9 Battery Management ROHSTexas InstrumentsBattery ManagementSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)TLV76133DCY
SOT-223-40℃~+125℃ 1 1.6V@(1A) 16V 1A 3.3V 60dB@(1kHz) 60uA 60uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)AONR21357
DFN-8(3x3)-55℃~+150℃ 1 P-Channel 12.3mΩ@4.5V 2.83nF 25nC@4.5V 30V 34A 365pF DFN-8(3x3) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)DSL34
SOD-123FLSchottky DiodeshongjiachengFMF06FTHR010-LH
120610mΩ 1W Current Sense Resistor SMD ±1% ±70ppm/℃ 1206 Current Sense Resistors / Shunt Resistors ROHSPSACurrent Sense Resistors / Shunt Resistors
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +4 |
| 16 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R6, R12, R15, R16, R19, R20, R21, R23, R24, R26, R27, R28, R33 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5, R8, R13, R17, R31 |
| 6 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C12, C13, C14, C15 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C18 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C17 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R22, R29, R30 |
| 3 | TS-1088 | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW1, SW2, SW3 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 74AHCT1G126 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U2, U6 |
| 2 | AONR21357 | Exit19_kicad_footprints:DFN_3.3x3.3 | Q1, Q2 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 330k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 74LVC2G02HD4-7 | Exit19_kicad_footprints:X2-DFN2010-8 | U8 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | BQ27220 | Package_BGA:Texas_DSBGA-9_1.62x1.58mm_Layout3x3_P0.5mm | U3 |
| 1 | Backup prog | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | CHRG | LED_SMD:LED_0805_2012Metric | D24 |
| 1 | DSL34 | Diode_SMD:D_SOD-123F | D22 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | FMF06FTHR010-LH | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | FTC252012S1R0MBCA | Inductor_SMD:L_Changjiang_FTC252012S | L1 |
| 1 | GT-USB-7010ASV | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J4 |
| 1 | NCP15XH103F03RC | Resistor_SMD:R_0402_1005Metric | TH1 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | STDBY | LED_SMD:LED_0805_2012Metric | D23 |
| 1 | TLV76133DCY | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U10 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm_ThermalVias | U7 |
| 1 | TPS61230DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U5 |
| 1 | XT30UPB-M | Connector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J1 |
| 1 | Yellow | LED_SMD:LED_0805_2012Metric | D1 |
Similar boards
- 4 layers80 × 105.5 mm

- 2 layers70.2 × 67.8 mm

- 4 layers52 × 52 mm

Moto gps rev a1
mx3353672833-debug/moto-gps-waveshare
MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental
112 parts529 - 4 layers107.1 × 32.4 mm

- 4 layers91.4 × 88.4 mm

- 4 layers78 × 68 mm

Robot canettes
Rouaa-spec/Garbage_Collector_PCB_Design
Conception Hardware de la carte électronique d'un robot de tri autonome : gestion de puissance (Alimentation Li-Ion / Chargeur), drivers moteurs et interfaçage de capteurs.
114 partsMIT - 4 layers104 × 69.4 mm

- 4 layers100 × 60 mm

Questions
How big is the TerkaPCB PCB?
It measures 144 × 133 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TerkaPCB use?
99 parts, built around the 74AHCT1G126GV, ESP32-C3-WROOM-02-H4, TPS61230DRC and BQ27220YZF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TerkaPCB KiCad files?
From the kaszmirek/TerkaPCB repository on GitHub, at the commit this page was made from: the board is hardware/TerkaPCB.kicad_pcb and its schematic hardware/TerkaPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TerkaPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask kaszmirek before reusing the design.