Skip to the content
12

FMF06FTHR010-LH

PSAExtended

10mΩ 1W Current Sense Resistor SMD ±1% ±70ppm/℃ 1206 Current Sense Resistors / Shunt Resistors ROHS

Part id
psa/FMF06FTHR010-LH
Category
Current Sense Resistors, Shunt Resistors
Package
1206
Pins
2
In stock
152,838 at JLCPCB (C105362)
Used on
5 open-source boards

Overview

The FMF06FTHR010-LH is a current Sense Resistors, Shunt Resistor made by PSA in a 1206 package with 2 pins. 10mΩ 1W Current Sense Resistor SMD ±1% ±70ppm/℃ 1206 Current Sense Resistors / Shunt Resistors ROHS.

PCBKit's library has its KiCad symbol (Device:R, from KiCad's library) and its footprint (Resistor_SMD:R_1206_3216Metric, from KiCad's library), ready for a KiCad board. 152,838 are in stock at JLCPCB (part C105362). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

Device:RFrom KiCad's library

Footprint

12
Resistor_SMD:R_1206_3216MetricFrom KiCad's library

Pinout

2
The pins of the FMF06FTHR010-LH
PinNameType
1—Passive
2—Passive

Open-source boards using it

5
  • 4 layers100 × 80 mmPd brick, the printed circuit board in 3D

    Pd brick

    enkhbold470/pd-brick

    USB-C Power Delivery bench supply: STUSB4500 sink, LM5176 buck-boost, INA228 monitor, 1.2-22 V set over I2C by an ESP32-S3. 4-layer KiCad 10 board.

    120 partsCERN-OHL-S-2.0
  • 4 layers64 × 80 mmIris brainstem, the printed circuit board in 3D

    Iris brainstem

    HeyPCB/iris-brainstem

    Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.

    97 partsCERN-OHL-S-2.0
  • 4 layers144 × 133 mmTerkaPCB, the printed circuit board in 3D

    TerkaPCB

    kaszmirek/TerkaPCB

    99 parts
  • 4 layers30 × 60 mmEsp32 ina237, the printed circuit board in 3D

    Esp32 ina237

    HeyPCB/esp32-sensors-2

    ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

    26 partsCERN-OHL-S-2.0
  • 2 layers32 × 24 mmPower usb meter, the printed circuit board in 3D

    Power usb meter

    HeyPCB/power-kit

    Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

    8 partsCERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the FMF06FTHR010-LH?

Yes. The symbol is Device:R and the footprint Resistor_SMD:R_1206_3216Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the FMF06FTHR010-LH?

1206, with 2 pins. Its footprint is drawn on this page.

Where is the FMF06FTHR010-LH datasheet?

PSA publishes it: the Datasheet link on this page opens it.

Where can I order the FMF06FTHR010-LH?

JLCPCB lists it as part C105362, with 152,838 in stock; the sellers' links on this page open their listings.

What can replace the FMF06FTHR010-LH?

Parts like it in the library: the RLM12FTCMR010 by 台湾大毅, the FRM121WFR010TM by FOJAN, the YLRY06-1-10F by Shenzhen Yezhan Elec. and the STE1206M1W0R010F by WALTER. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the FMF06FTHR010-LH?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.