kamocat/pi_upsA minimal UPS board for Raspberry Pi
Pi ups is an open-source printed circuit board by kamocat, from the kamocat/pi_ups repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.3 × 30 mm with 24 parts on 18 nets, routed with 146 tracks and 45 vias.
It is built around the AP63205WU and MCP3428-E/SL. Its parts include 6 capacitors, 5 resistors, 3 connectors, 2 ICs and 2 fuses. It belongs with the power boards of this library.
A minimal UPS board for Raspberry Pi
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 50m | Resistor_SMD:R_1206_3216Metric | R1, R2, R3 |
| 3 | Jumper_2_Bridged | pi_ups:jumper_bridged_0603 | ADR0, ADR1, JP1 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | 2A | Capacitor_THT:C_Disc_D12.0mm_W4.4mm_P7.75mm | F1, F2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 4.7u | pi_ups:NRS5030 | L1 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D1 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | MCP3428 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
It measures 34.3 × 30 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the AP63205WU and MCP3428-E/SL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kamocat/pi_ups repository on GitHub, at the commit this page was made from: the board is pi_ups.kicad_pcb and its schematic pi_ups.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
essensys-hub/essensys-i2c-etoile-0v
Carte qui relie le boîtier principal (BP, carte SC944D) aux boîtiers auxiliaires (BA1 SC940D, BA2 SC941C, BA3 SC942C) d'une installation Essensys en étoile autour d'un plan 0 V commun, à la place du chaînage d'origine.
kkrizka/powerboard_mass_test_adapter_active
Active Part of the Mass Test Board for ITk Strips PowerBoard
polykit/polykit-x-inputboard
Input board for my 8-voice polyphonic synthesizer
RedlabsDE/Digital-DC-Load
In the "Calibration" page, the raw ADC values are displayed. The user can set the raw DAC value.
czalinski/ThlHwTestDevices
KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.
