Skip to the content
1234567891011121314

MCP3428-E/SL

Microchip TechnologyExtended

-40℃~+125℃ 135uA 15Hz 16 2.7V~5.5V 4 Auto calibration、Power-on reset、Bipolar input Built-in Built-in I2C Sigma-Delta Support Yes SOIC-14 Analog to Digital Converters (ADC) ROHS

Part id
microchip/MCP3428-E/SL
Category
Analog To Digital Converters (ADC)
Package
SOIC-14
Pins
14
In stock
181 at JLCPCB (C560166)
Used on
19 open-source boards

Overview

The MCP3428-E/SL is an analog To Digital Converter made by Microchip Technology in a SOIC-14 package with 14 pins. -40℃~+125℃ 135uA 15Hz 16 2.7V~5.5V 4 Auto calibration、Power-on reset、Bipolar input Built-in Built-in I2C Sigma-Delta Support Yes SOIC-14 Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP3428-E_SL, from EasyEDA) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 181 are in stock at JLCPCB (part C560166). 19 open-source boards in 10 repositories on GitHub use it.

Symbol

1CH1+2CH1-3CH2+4CH2-5VSS6VDD7SDA8SCL9ADR010ADR111CH3+12CH3-13CH4+14CH4-
EasyEDA_Cloud:MCP3428-E_SLFrom EasyEDA

Footprint

1234567891011121314
Package_SO:SOIC-14_3.9x8.7mm_P1.27mmFrom KiCad's library

From the datasheet

12
Supply, least
2.7 V · VDD, recommended operating, min · p. 6
Supply, most
5.5 V · VDD, recommended operating, max · p. 6
Supply, absolute maximum
7 V · VDD, absolute maximum · p. 5
Works from
-40 °C · operating ambient temperature, min · p. 7
Works up to
125 °C · operating ambient temperature, max · p. 7
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 5
Takes working
145 µA · VDD, during conversion, VDD = 5.0 V, typical · p. 6
Takes at most
180 µA · VDD, during conversion, VDD = 5.0 V, max · p. 6
Takes asleep
300 nA · VDD, standby mode, VDD = 5.0 V, typical · p. 6
A pin gives at most
10 mA · output pin source or sink, absolute maximum · p. 5
Junction to air (14L-SOIC)
120 K/W · junction to ambient, typical · p. 7
Junction to air (14L-TSSOP)
100 K/W · junction to ambient, typical · p. 7

Open-source boards using it

19See all 19
  • 2 layers235 × 68 mmN2-etoile-0v, the printed circuit board in 3D

    N2-etoile-0v

    essensys-hub/essensys-i2c-etoile-0v

    Carte qui relie le boîtier principal (BP, carte SC944D) aux boîtiers auxiliaires (BA1 SC940D, BA2 SC941C, BA3 SC942C) d'une installation Essensys en étoile autour d'un plan 0 V commun, à la place du chaînage d'origine.

    181 partsMIT
  • 2 layers34.3 × 30 mmPi ups, the printed circuit board in 3D

    Pi ups

    kamocat/pi_ups

    A minimal UPS board for Raspberry Pi

    24 partsMIT
  • 4 layers190.5 × 127 mmPbv2 mass test adapter active, the printed circuit board in 3D

    Pbv2 mass test adapter active

    kkrizka/powerboard_mass_test_adapter_active

    Active Part of the Mass Test Board for ITk Strips PowerBoard

    290 parts
  • 2 layers50 × 160 mmPolykit x inputboard, the printed circuit board in 3D

    Polykit x inputboard

    polykit/polykit-x-inputboard

    Input board for my 8-voice polyphonic synthesizer

    80 parts
  • 2 layers70 × 30 mm021-00 Digital DC Load, the printed circuit board in 3D

    021-00 Digital DC Load

    RedlabsDE/Digital-DC-Load

    In the "Calibration" page, the raw ADC values are displayed. The user can set the raw DAC value.

    78 parts
  • 4 layers98.6 × 80 mmPrinter+Sticks, the printed circuit board in 3D

    Printer+Sticks

    aslak3/MAXI030

    MC68030 based expandable computer design

    26 parts38GPL-2.0
  • 2 layers80 × 72 mmAnalog Input Card, the printed circuit board in 3D

    Analog Input Card

    brandtks/AquaPicModules

    AquaPic modules, board design and firmware

    63 parts2
  • 2 layers160 × 122 mmJackOfAllTradesV1p0, the printed circuit board in 3D

    JackOfAllTradesV1p0

    czalinski/ThlHwTestDevices

    KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.

    119 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP3428-E/SL?

Yes. The symbol is EasyEDA_Cloud:MCP3428-E_SL and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP3428-E/SL?

SOIC-14, with 14 pins. Its footprint is drawn on this page.

Where is the MCP3428-E/SL datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP3428-E/SL?

JLCPCB lists it as part C560166, with 181 in stock; the sellers' links on this page open their listings.

What can replace the MCP3428-E/SL?

Parts like it in the library: the HX712 by AVIA, the CS1238-SOP14 by CHIPSEA, the MCP3204-CI/SL by Microchip Technology and the MCP3424-E/SL by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP3428-E/SL?

19 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.