
CearusTab
Damocles2/CaerusTab
A well engineered and uniquely shaped mechanical macro keyboard made for the open source community!

Ortho Allison is an open-source printed circuit board by kajahtaa, from the kajahtaa/Ortho_Allison repository on GitHub. It is a 2-layer board of 319.7 × 129.2 mm with 189 parts on 120 nets, routed with 424 tracks and 0 vias.
It is built around the ATMEGA32U4-AU and TPD2S017DBV. Its parts include 85 diodes, 85 switches, 8 capacitors, 4 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 85 | D | D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +69 |
| 79 | SW_Push | SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +63 |
| 4 | 0.1u | C_0603_1608Metric | C3, C4, C5, C6 |
| 4 | SW_Push | SW_Cherry_MX_PCB_1.50u | SW77, SW78, SW84, SW85 |
| 2 | 10k | R_0603_1608Metric | R3, R4 |
| 2 | 22 | R_0603_1608Metric | R1, R2 |
| 2 | 22p | C_0603_1608Metric | C1, C2 |
| 2 | MountingHole | Stabilizer_Cherry_MX_2.00u | ST80, ST82 |
| 2 | SW_Push | SW_Cherry_MX_PCB_2.00u | SW80, SW82 |
| 1 | 1u | C_0603_1608Metric | C8 |
| 1 | 4.7u | C_0603_1608Metric | C7 |
| 1 | ATmega32U4-A | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | SW_SPST | SW_SPST_TL3342 | RST |
| 1 | TPD2S017 | SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |

Damocles2/CaerusTab
A well engineered and uniquely shaped mechanical macro keyboard made for the open source community!



ruuvi/ruuvilogger_hw
You can find RuuviLogger related hardware design files from this repository. Design is almost finished, but not 100% ready. If RuuviLogger project continues, Rev.A version will be probably deprecated.

artificer123/Microwave_SDR_PCB
Collection of files used in development of a Xilinx Zynq based SDR with transverters for the V/UHF bands

gunnarbeutner/doorbell
doorbell.kicadsch / doorbell.kicadpcb are the authoritative source — edit them in KiCad. build.sh never authors copper; it runs the checks KiCad's own DRC/ERC can't express and exports the fab outputs:

victorstoica114/Invertor_board
This repository contains an ESP-IDF firmware for an ESP32 board that bridges, translates, decodes, and exposes battery/inverter communication over CAN and RS485.

victorstoica114/UWB_Module_ESP_IDF
ESP-IDF 6.0.2 firmware for the custom UWB Module V1.0 Rev.B, based on an ESP32-S3-WROOM-1-N16R8. The same application image runs on every module; persistent identity and runtime configuration select the role and active…
It measures 319.7 × 129.2 mm and has 2 copper layers, 1.6 mm thick.
189 parts, built around the ATMEGA32U4-AU and TPD2S017DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kajahtaa/Ortho_Allison repository on GitHub, at the commit this page was made from: the board is Ortho Allison.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kajahtaa before reusing the design.