

MicAmp
WIP! Don't try repeating!
- Size
- 100 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 48
- Pads
- 203
- Tracks, vias
- 236, 77
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jan 2024
- Updated
- 7 Jan 2024
Overview
MicAmp is an open-source printed circuit board by k1zmt, from the k1zmt/SSB85MultiPCB repository on GitHub. It is a 2-layer board of 100 × 55 mm with 78 parts on 48 nets, routed with 236 tracks and 77 vias.
It is built around the LM358, LM386 and BF998R, with the MBR0520 and BSS123 among its other parts. Its parts include 29 capacitors, 21 resistors, 10 connectors, 4 ICs and 4 diodes. It belongs with the radio and wireless boards of this library.
Main components
5LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierLM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmpsBF998R
SOT-143RSOT-143R New Arrivals ROHSNXP SemiconductorsUncategorisedMBR0520
SOD-123-55℃~+150℃ 20V 450mV@500mA 5.5A 500mA Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesBSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdParts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 104 | Capacitor_SMD:C_0805_2012Metric | C7, C8, C10, C11, C16, C17, C18, C19, C20, C24, C27, R9 |
| 9 | 106 | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5, C9, C12, C13, C22, C25, C26 |
| 7 | 103 | Resistor_SMD:R_0805_2012Metric | R1, R2, R5, R14, R15, R18, R19 |
| 5 | MH | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5 |
| 3 | 105 | Capacitor_SMD:C_0805_2012Metric | C21, C23, R12 |
| 2 | 101 | Resistor_SMD:R_0805_2012Metric | R13, R20 |
| 2 | 102 | Capacitor_SMD:C_0805_2012Metric | R11, R21 |
| 2 | 472 | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 47R | Resistor_SMD:R_0805_2012Metric | R3, R10 |
| 2 | MBR0520 | Diode_SMD:D_SOD-123 | D3, D4 |
| 1 | +12V IN | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J5 |
| 1 | +12V OUT | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J6 |
| 1 | +5V | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | +5V_TX | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J9 |
| 1 | 1000uFx16V | Capacitor_SMD:CP_Elec_10x12.6 | C4 |
| 1 | 100uFx6.3V | Capacitor_SMD:CP_Elec_8x10.5 | C6 |
| 1 | 106 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D2 |
| 1 | 202 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 221 | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 222 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 227 | Capacitor_SMD:CP_Elec_6.3x3 | C15 |
| 1 | 473 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 473 | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 503 | Potentiometer_SMD:Potentiometer_Bourns_3224W_Vertical | RV2 |
| 1 | 510 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 681 | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | A10K | PhilsFootprintLibrary:Potentiometer_Switch | RV1 |
| 1 | AF_IN | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J8 |
| 1 | AudioJack3_Ground_SwitchTR | PhilsFootprintLibrary:Jack_3.5mm_PJ342_Horizontal2 | J4 |
| 1 | BF998R | Package_TO_SOT_SMD:SOT-143R | U4 |
| 1 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | DZ2S036X0L | Diode_SMD:D_SOD-523 | D1 |
| 1 | LM358 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LM386 | Package_SO:PowerIntegrations_SO-8 | U2 |
| 1 | L_Ferrite | Inductor_SMD:L_Taiyo-Yuden_NR-10050_9.8x10.0mm | L1 |
| 1 | MIC | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | MIC_IN | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | MIC_OUT | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | SPEAKER | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J7 |
| 1 | SSM2167 | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | VBAT | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J10 |
More from k1zmt/SSB85MultiPCB
12- 2 layers90 × 60 mm

- 2 layers175.1 × 120 mm

- 2 layers100 × 60 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers40 × 35 mm

- 2 layers100 × 55 mm

- 2 layers72 × 20 mm

- 2 layers35 × 14 mm

- 2 layers36 × 35 mm

Similar boards
- 2 layers82 × 82 mm

- 6 layers160 × 100 mm

- 4 layers32.5 × 41 mm

- 2 layers90 × 60 mm

- 2 layers108 × 110 mm

- 2 layers125 × 120 mm

- 2 layers152 × 88 mm

RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers100 × 100 mm

MCTheremin
profdc9/MCTheremin
Microcontroller based theremin using the STM32F103C8T6 bluepill board
99 parts11
Questions
How big is the MicAmp PCB?
It measures 100 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MicAmp use?
78 parts, built around the LM358, LM386, BF998R and MBR0520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicAmp KiCad files?
From the k1zmt/SSB85MultiPCB repository on GitHub, at the commit this page was made from: the board is MicAmp/MicAmp.kicad_pcb and its schematic AD831HotBoard/AD831HotBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicAmp design in my own project?
Its repository states no licence, so its author keeps all rights: ask k1zmt before reusing the design.
